From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bo Shen Subject: Re: [PATCH v2 0/2] ARM: at91: remove phy fixup for sama5d3xek boards Date: Thu, 10 Jul 2014 10:24:06 +0800 Message-ID: <53BDF946.7060404@atmel.com> References: <1403777615-25685-1-git-send-email-boris.brezillon@free-electrons.com> <20140709183442.14b8aef8@bbrezillon> Mime-Version: 1.0 Content-Type: text/plain; charset="ISO-8859-1"; format=flowed Content-Transfer-Encoding: 7bit Cc: Nicolas Ferre , Jean-Christophe Plagniol-Villard , Alexandre Belloni , Andrew Victor , , , "David S. Miller" , To: Boris BREZILLON Return-path: In-Reply-To: <20140709183442.14b8aef8@bbrezillon> Sender: linux-kernel-owner@vger.kernel.org List-Id: netdev.vger.kernel.org Hi Boris, On 07/10/2014 12:34 AM, Boris BREZILLON wrote: > Hello Bo, > > I know you're quite busy, but if you have some time could you test this > series on both CPU Modules (Embest and Ronetix): I only own the Embest > one. > > Best Regards, > > Boris > > On Thu, 26 Jun 2014 12:13:33 +0200 > Boris BREZILLON wrote: > >> Hello, >> >> This patch removes a board specific hook for sama5d3xek boards from the >> sama5d3 generic DT board file. >> >> This hook (which register a phy fixup configuring board specific delays >> in the ksz9021 ethernet phy) is now replaced by the appropriate DT >> properties definitions in the sama5d3xcm.dtsi file. >> >> Best Regards, >> >> Boris >> >> Changes since v1: >> - fix txc-skew-ps and rxc-skew-ps delays >> - remove phy address info to handle Ronetix and Embest HW designs >> >> Boris BREZILLON (2): >> ARM: at91/dt: describe rgmii ethernet phy connected to sama5d3xek >> boards >> ARM: at91: remove phy fixup for sama5d3xek boards >> >> arch/arm/boot/dts/sama5d3xcm.dtsi | 15 +++++++++++++++ >> arch/arm/mach-at91/board-dt-sama5.c | 22 ---------------------- >> 2 files changed, 15 insertions(+), 22 deletions(-) >> For this series, test OK on sama5d33ek (Ronetix) and sama5d34ek (Embest). Tested-by: Bo Shen Best Regards, Bo Shen