netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Neil Armstrong <superna9999@gmail.com>
To: Nicolas Ferre <nicolas.ferre@atmel.com>,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 2/2] net: macb: Handle errors in RX path
Date: Fri, 18 Jul 2014 11:53:29 +0200	[thread overview]
Message-ID: <53C8EE99.6070605@gmail.com> (raw)

In certain circumstances, the MACB fails to write correct RX ring
descriptor, and lead to actually managed by BUG_ON() error cases.

Handle these two cases by returning error values, while resetting
the RX ring and RX HW path in the poll methos.

In the same time, check and handle BNA and OVR into poll method
by using the same error management.

Signed-off-by: Neil Armstrong <narmstrong@neotion.com>
---
 drivers/net/ethernet/cadence/macb.c |   55 +++++++++++++++++++++++++++++++---
 1 files changed, 50 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c
index 20ad483..c94355d 100644
--- a/drivers/net/ethernet/cadence/macb.c
+++ b/drivers/net/ethernet/cadence/macb.c
@@ -755,6 +755,17 @@ static int macb_rx_frame(struct macb *bp, unsigned int first_frag,
 		macb_rx_ring_wrap(first_frag),
 		macb_rx_ring_wrap(last_frag), len);
 
+	if (!(desc->ctrl & MACB_BIT(RX_EOF))) {
+		netdev_vdbg(bp->dev, "macb_rx_frame missing EOF\n");
+		return -EIO;
+	}
+
+	desc = macb_rx_desc(bp, first_frag);
+	if (!(desc->ctrl & MACB_BIT(RX_SOF))) {
+		netdev_vdbg(bp->dev, "macb_rx_frame missing SOF\n");
+		return -EIO;
+	}
+
 	/*
 	 * The ethernet header starts NET_IP_ALIGN bytes into the
 	 * first buffer. Since the header is 14 bytes, this makes the
@@ -789,7 +800,10 @@ static int macb_rx_frame(struct macb *bp, unsigned int first_frag,
 		unsigned int frag_len = bp->rx_buffer_size;
 
 		if (offset + frag_len > len) {
-			BUG_ON(frag != last_frag);
+			if(frag != last_frag) {
+				dev_kfree_skb_any(skb);
+				return -EIO;
+			}
 			frag_len = len - offset;
 		}
 		skb_copy_to_linear_data_offset(skb, offset,
@@ -844,9 +858,13 @@ static int macb_rx(struct macb *bp, int budget)
 
 		if (ctrl & MACB_BIT(RX_EOF)) {
 			int dropped;
-			BUG_ON(first_frag == -1);
+			if (first_frag == -1)
+				return -EIO;
 
 			dropped = macb_rx_frame(bp, first_frag, tail);
+			if (dropped < 0)
+				return dropped;
+
 			first_frag = -1;
 			if (!dropped) {
 				received++;
@@ -872,12 +890,22 @@ static int macb_poll(struct napi_struct *napi, int budget)
 	status = macb_readl(bp, RSR);
 	macb_writel(bp, RSR, status);
 
-	work_done = 0;
+	work_done = -EIO;
 
 	netdev_vdbg(bp->dev, "poll: status = %08lx, budget = %d\n",
-		   (unsigned long)status, budget);
+			(unsigned long)status, budget);
+
+	if (status & (MACB_BIT(OVR) | MACB_BIT(BNA)) ||
+			!(status & MACB_BIT(REC))) {
+		netdev_err(bp->dev, "RX error, status = %02lx\n",
+				(unsigned long)status);
+		goto rx_out;
+	}
 
 	work_done = bp->macbgem_ops.mog_rx(bp, budget);
+	if (work_done < 0)
+		goto rx_out;
+
 	if (work_done < budget) {
 		napi_complete(napi);
 
@@ -892,7 +920,24 @@ static int macb_poll(struct napi_struct *napi, int budget)
 		}
 	}
 
-	/* TODO: Handle errors */
+	return work_done;
+
+rx_out:
+	/* 
+	 * In case of error, disable RX and reset
+	 * the descriptor ring before re-enabling RX.
+	 */
+	macb_writel(bp, NCR, macb_readl(bp, NCR) & ~MACB_BIT(RE));
+
+	bp->macbgem_ops.mog_init_rx_rings(bp);
+	macb_writel(bp, RBQP, bp->rx_ring_dma);
+
+	/* Re-enable RX and get notified for new packets */
+	macb_writel(bp, NCR, macb_readl(bp, NCR) | MACB_BIT(RE));
+
+	napi_complete(napi);
+
+	macb_writel(bp, IER, MACB_RX_INT_FLAGS);
 
 	return work_done;
 }
-- 
1.7.0.4

             reply	other threads:[~2014-07-18  9:53 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-07-18  9:53 Neil Armstrong [this message]
2014-07-18 10:05 ` [PATCH 2/2] net: macb: Handle errors in RX path Varka Bhadram

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=53C8EE99.6070605@gmail.com \
    --to=superna9999@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=nicolas.ferre@atmel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).