From: Giuseppe CAVALLARO <peppe.cavallaro@st.com>
To: Ley Foon Tan <lftan@altera.com>, <netdev@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
"David S. Miller" <davem@davemloft.net>
Cc: <lftan.linux@gmail.com>, Vince Bridgers <vbridger@altera.com>
Subject: Re: [PATCH] net: stmmac: add dcrs parameter
Date: Mon, 25 Aug 2014 14:23:39 +0200 [thread overview]
Message-ID: <53FB2ACB.9070909@st.com> (raw)
In-Reply-To: <1408967442-2724-1-git-send-email-lftan@altera.com>
Hello
On 8/25/2014 1:50 PM, Ley Foon Tan wrote:
> This patch add the option to enable DCRS bit in GMAC control register.
> Default is disabled if snps,dcrs is not defined.
>
> For MII, Carrier Sense (CRS) must be asserted during transmission
> whereas in RGMII, CRS is not. RGMII does not provide a way to signal
> loss of carrier during a transmission.
>
> When DCRS bit set high in control register, the MAC transmitter
> ignore the (G)MII Carrier Sense signal during frame transmission
> in the half-duplex mode. This request results in no errors generated
> because of Loss of Carrier or No Carrier during such transmission.
We have to add this fix in the driver. I wonder if we can avoid to have
another parameter and just have it set as default
(http://git.stlinux.com/?p=stm/linux-sh4-2.6.32.y.git;a=commit;h=b0b863bf65c36dc593f6b7b4b418394fd880dae2)
Or we could touch this bit according to the link duplex negotiated and
the phy mode selected.
peppe
>
> Signed-off-by: Ley Foon Tan <lftan@altera.com>
> ---
> Documentation/devicetree/bindings/net/stmmac.txt | 4 ++++
> drivers/net/ethernet/stmicro/stmmac/common.h | 3 ++-
> drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c | 4 +++-
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 3 ++-
> drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 2 ++
> include/linux/stmmac.h | 1 +
> 6 files changed, 14 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt
> index 9b03c57..a68e720 100644
> --- a/Documentation/devicetree/bindings/net/stmmac.txt
> +++ b/Documentation/devicetree/bindings/net/stmmac.txt
> @@ -39,6 +39,10 @@ Optional properties:
> further clocks may be specified in derived bindings.
> - clock-names: One name for each entry in the clocks property, the
> first one should be "stmmaceth".
> +- snps,dcrs: Enable DCRS bit in GMAC control register. This DCRS bit makes the
> + MAC transmitter ignore the (G)MII CRS signal during frame transmission
> + in the half-duplex mode. This request results in no errors generated
> + because of Loss of Carrier or No Carrier during such transmission.
>
> Examples:
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
> index de507c3..9abe221 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/common.h
> +++ b/drivers/net/ethernet/stmicro/stmmac/common.h
> @@ -445,10 +445,11 @@ struct mac_device_info {
> int multicast_filter_bins;
> int unicast_filter_entries;
> int mcast_bits_log2;
> + int dcrs;
> };
>
> struct mac_device_info *dwmac1000_setup(void __iomem *ioaddr, int mcbins,
> - int perfect_uc_entries);
> + int perfect_uc_entries, int dcrs);
> struct mac_device_info *dwmac100_setup(void __iomem *ioaddr);
>
> void stmmac_set_mac_addr(void __iomem *ioaddr, u8 addr[6],
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
> index d8ef187..924d450 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
> @@ -37,6 +37,7 @@ static void dwmac1000_core_init(struct mac_device_info *hw, int mtu)
> void __iomem *ioaddr = hw->pcsr;
> u32 value = readl(ioaddr + GMAC_CONTROL);
> value |= GMAC_CORE_INIT;
> + value |= hw->dcrs;
> if (mtu > 1500)
> value |= GMAC_CONTROL_2K;
> if (mtu > 2000)
> @@ -409,7 +410,7 @@ static const struct stmmac_ops dwmac1000_ops = {
> };
>
> struct mac_device_info *dwmac1000_setup(void __iomem *ioaddr, int mcbins,
> - int perfect_uc_entries)
> + int perfect_uc_entries, int dcrs)
> {
> struct mac_device_info *mac;
> u32 hwid = readl(ioaddr + GMAC_VERSION);
> @@ -422,6 +423,7 @@ struct mac_device_info *dwmac1000_setup(void __iomem *ioaddr, int mcbins,
> mac->multicast_filter_bins = mcbins;
> mac->unicast_filter_entries = perfect_uc_entries;
> mac->mcast_bits_log2 = 0;
> + mac->dcrs = dcrs;
>
> if (mac->multicast_filter_bins)
> mac->mcast_bits_log2 = ilog2(mac->multicast_filter_bins);
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> index 08addd6..bf35b19 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> @@ -2600,7 +2600,8 @@ static int stmmac_hw_init(struct stmmac_priv *priv)
> priv->dev->priv_flags |= IFF_UNICAST_FLT;
> mac = dwmac1000_setup(priv->ioaddr,
> priv->plat->multicast_filter_bins,
> - priv->plat->unicast_filter_entries);
> + priv->plat->unicast_filter_entries,
> + priv->plat->dcrs);
> } else {
> mac = dwmac100_setup(priv->ioaddr);
> }
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> index bb524a9..07f895f 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> @@ -227,6 +227,8 @@ static int stmmac_probe_config_dt(struct platform_device *pdev,
> pr_warn("force_sf_dma_mode is ignored if force_thresh_dma_mode is set.");
> }
>
> + plat->dcrs = of_property_read_bool(np, "snps,dcrs");
> +
> return 0;
> }
> #else
> diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
> index cd63851..6367f42 100644
> --- a/include/linux/stmmac.h
> +++ b/include/linux/stmmac.h
> @@ -114,6 +114,7 @@ struct plat_stmmacenet_data {
> int maxmtu;
> int multicast_filter_bins;
> int unicast_filter_entries;
> + int dcrs;
> void (*fix_mac_speed)(void *priv, unsigned int speed);
> void (*bus_setup)(void __iomem *ioaddr);
> void *(*setup)(struct platform_device *pdev);
>
next prev parent reply other threads:[~2014-08-25 12:23 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-25 11:50 [PATCH] net: stmmac: add dcrs parameter Ley Foon Tan
2014-08-25 12:23 ` Giuseppe CAVALLARO [this message]
2014-08-25 12:34 ` Chen-Yu Tsai
2014-08-25 12:51 ` Giuseppe CAVALLARO
2014-08-25 15:10 ` Vince Bridgers
2014-08-26 5:38 ` Giuseppe CAVALLARO
2014-08-26 12:35 ` Vince Bridgers
2014-08-26 13:20 ` Giuseppe CAVALLARO
2014-08-27 1:27 ` Ley Foon Tan
2014-08-27 2:36 ` Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53FB2ACB.9070909@st.com \
--to=peppe.cavallaro@st.com \
--cc=davem@davemloft.net \
--cc=lftan.linux@gmail.com \
--cc=lftan@altera.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=vbridger@altera.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).