Re: [PATCH net-next] net: phy: add BCM7425 and BCM7429 PHYs

[Florian Fainelli <f.fainelli@gmail.com>]

Hello Petri,

This looks good to me, some minor comments below

On 10/01/2014 11:31 AM, Petri Gynther wrote:
> Signed-off-by: Petri Gynther <pgynther@google.com>
> ---
>  drivers/net/phy/bcm7xxx.c | 28 ++++++++++++++++++++++++++++
>  include/linux/brcmphy.h   |  2 ++
>  2 files changed, 30 insertions(+)
> 
> diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c
> index daae699..0ae90f1 100644
> --- a/drivers/net/phy/bcm7xxx.c
> +++ b/drivers/net/phy/bcm7xxx.c
> @@ -350,6 +350,32 @@ static struct phy_driver bcm7xxx_driver[] = {
>  	BCM7XXX_28NM_GPHY(PHY_ID_BCM7439, "Broadcom BCM7439"),
>  	BCM7XXX_28NM_GPHY(PHY_ID_BCM7445, "Broadcom BCM7445"),
>  {
> +	.phy_id         = PHY_ID_BCM7425,
> +	.phy_id_mask    = 0xffffffff,

The last 4 bits contain the revision, although we never increased it, it
is safer to match with 0xffff_fff0. If that means dropping the catch all
40nm entry, that's fine by me.

> +	.name           = "Broadcom BCM7425 External PHY",

Just use "Broadcom BCM7425" here, for consistency with the other
entries, and since that's really the internal PHY of the chip.

> +	.features       = PHY_GBIT_FEATURES |
> +			  SUPPORTED_Pause | SUPPORTED_Asym_Pause,
> +	.flags          = 0,
> +	.config_init    = bcm7xxx_config_init,
> +	.config_aneg    = genphy_config_aneg,
> +	.read_status    = genphy_read_status,
> +	.suspend        = bcm7xxx_suspend,
> +	.resume         = bcm7xxx_config_init,
> +	.driver         = { .owner = THIS_MODULE },
> +}, {
> +	.phy_id         = PHY_ID_BCM7429,
> +	.phy_id_mask    = 0xffffffff,
> +	.name           = "Broadcom BCM7429 Internal PHY",

Same thing here.

> +	.features       = PHY_GBIT_FEATURES |
> +			  SUPPORTED_Pause | SUPPORTED_Asym_Pause,
> +	.flags          = PHY_IS_INTERNAL,
> +	.config_init    = bcm7xxx_config_init,
> +	.config_aneg    = genphy_config_aneg,
> +	.read_status    = genphy_read_status,
> +	.suspend        = bcm7xxx_suspend,
> +	.resume         = bcm7xxx_config_init,
> +	.driver         = { .owner = THIS_MODULE },
> +}, {
>  	.phy_id		= PHY_BCM_OUI_4,
>  	.phy_id_mask	= 0xffff0000,
>  	.name		= "Broadcom BCM7XXX 40nm",
> @@ -381,6 +407,8 @@ static struct mdio_device_id __maybe_unused bcm7xxx_tbl[] = {
>  	{ PHY_ID_BCM7250, 0xfffffff0, },
>  	{ PHY_ID_BCM7364, 0xfffffff0, },
>  	{ PHY_ID_BCM7366, 0xfffffff0, },
> +	{ PHY_ID_BCM7425, 0xffffffff, },
> +	{ PHY_ID_BCM7429, 0xffffffff, },
>  	{ PHY_ID_BCM7439, 0xfffffff0, },
>  	{ PHY_ID_BCM7445, 0xfffffff0, },
>  	{ PHY_BCM_OUI_4, 0xffff0000 },
> diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h
> index 3f626fe..666132e 100644
> --- a/include/linux/brcmphy.h
> +++ b/include/linux/brcmphy.h
> @@ -16,6 +16,8 @@
>  #define PHY_ID_BCM7250			0xae025280
>  #define PHY_ID_BCM7364			0xae025260
>  #define PHY_ID_BCM7366			0x600d8490
> +#define PHY_ID_BCM7425			0x03625e69
> +#define PHY_ID_BCM7429			0x600d8731
>  #define PHY_ID_BCM7439			0x600d8480
>  #define PHY_ID_BCM7445			0x600d8510
>  
>