netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Florian Fainelli <f.fainelli@gmail.com>
To: Petri Gynther <pgynther@google.com>
Cc: netdev@vger.kernel.org, David Miller <davem@davemloft.net>,
	jaedon.shin@gmail.com
Subject: Re: [PATCH net 1/3] net: bcmgenet: fix off-by-one in incrementing read pointer
Date: Fri, 10 Oct 2014 09:41:13 -0700	[thread overview]
Message-ID: <54380C29.9010704@gmail.com> (raw)
In-Reply-To: <CAGXr9JHBVW9rOiSUCCsVnYp73OPdyynP35xiAnKjRsVCf8fK9Q@mail.gmail.com>

On 10/09/2014 11:01 PM, Petri Gynther wrote:
> Hi Florian,
> 
> On Thu, Oct 9, 2014 at 6:06 PM, Florian Fainelli <f.fainelli@gmail.com> wrote:
>> Commit b629be5c8399d7c423b92135eb43a86c924d1cbc ("net: bcmgenet: check
>> harder for out of memory conditions") moved the increment of the local
>> read pointer *before* reading from the hardware descriptor using
>> dmadesc_get_length_status(), which creates an off-by-one situation.
>>
>> Fix this by moving again the read_ptr increment after we have read the
>> hardware descriptor to get both the control block and the read pointer
>> back in sync.
>>
>> Fixes: b629be5c8399 ("net: bcmgenet: check harder for out of memory conditions")
>> Reported-by: Jaedon Shin <jaedon.shin@gmail.com>
>> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
>> ---
>>  drivers/net/ethernet/broadcom/genet/bcmgenet.c | 6 +++---
>>  1 file changed, 3 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
>> index fff2634b6f34..f1bcebcbba80 100644
>> --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
>> +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
>> @@ -1287,9 +1287,6 @@ static unsigned int bcmgenet_desc_rx(struct bcmgenet_priv *priv,
>>
>>                 rxpktprocessed++;
>>
>> -               priv->rx_read_ptr++;
>> -               priv->rx_read_ptr &= (priv->num_rx_bds - 1);
>> -
> 
> Wouldn't it be better to move the three lines:
> rxpktprocessed++;
> priv->rx_read_ptr++;
> priv->rx_read_ptr &= (priv->num_rx_bds - 1)
> 
> as the last lines of the while-loop, after the CB refill?

That's basically what Jaedon did in his first patch, I don't have strong
objections in doing that if you think that makes it look clearer.

> 
> -- Petri
> 
> 
>>                 /* We do not have a backing SKB, so we do not have a
>>                  * corresponding DMA mapping for this incoming packet since
>>                  * bcmgenet_rx_refill always either has both skb and mapping or
>> @@ -1332,6 +1329,9 @@ static unsigned int bcmgenet_desc_rx(struct bcmgenet_priv *priv,
>>                           __func__, p_index, priv->rx_c_index,
>>                           priv->rx_read_ptr, dma_length_status);
>>
>> +               priv->rx_read_ptr++;
>> +               priv->rx_read_ptr &= (priv->num_rx_bds - 1);
>> +
>>                 if (unlikely(!(dma_flag & DMA_EOP) || !(dma_flag & DMA_SOP))) {
>>                         netif_err(priv, rx_status, dev,
>>                                   "dropping fragmented packet!\n");
>> --
>> 1.9.1
>>

  reply	other threads:[~2014-10-10 16:41 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-10-10  1:06 [PATCH net 0/3] net: bcmgenet & systemport fixes Florian Fainelli
2014-10-10  1:06 ` [PATCH net 1/3] net: bcmgenet: fix off-by-one in incrementing read pointer Florian Fainelli
2014-10-10  6:01   ` Petri Gynther
2014-10-10 16:41     ` Florian Fainelli [this message]
2014-10-10 17:17       ` Petri Gynther
2014-10-10 17:18         ` Florian Fainelli
2014-10-10  1:06 ` [PATCH net 2/3] net: bcmgenet: avoid unbalanced enable_irq_wake calls Florian Fainelli
2014-10-10  1:06 ` [PATCH net 3/3] net: systemport: " Florian Fainelli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=54380C29.9010704@gmail.com \
    --to=f.fainelli@gmail.com \
    --cc=davem@davemloft.net \
    --cc=jaedon.shin@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=pgynther@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).