From: "Stefan Bottelier | Ocius.nl" <stefan@ocius.nl>
To: netdev@vger.kernel.org
Subject: Problem with 10Gbit Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver
Date: Fri, 24 Oct 2014 10:42:52 +0200 [thread overview]
Message-ID: <544A110C.4030402@ocius.nl> (raw)
Hello,
We are using Dell Blade Centers, but we get a error on the 10Gbit
Broadcom adapter bnx2x
bnx2x 0000:01:00.0: part number 394D4342-31383735-30315430-473030
WARNING: at drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c:9410
bnx2x_init_one+0x1194/0x32b9
Hardware name: PowerEdge M620
Modules linked in:
Pid: 1, comm: swapper/0 Not tainted 3.2.63 #1
Call Trace:
warn_slowpath_common+0x78/0xb0
bnx2x_init_one+0x1194/0x32b9
bnx2x_init_one+0x1194/0x32b9
warn_slowpath_null+0x1b/0x20
bnx2x_init_one+0x1194/0x32b9
load_balance+0xb5/0x600
soft_cursor+0x19d/0x220
idr_get_empty_slot+0xf2/0x290
sysfs_link_sibling+0x6a/0xb0
__sysfs_add_one+0x5b/0x100
ida_get_new_above+0x49/0x1e0
kmem_cache_alloc+0xa9/0xb0
sysfs_add_one+0x1c/0xe0
sysfs_addrm_finish+0x12/0x90
sysfs_new_dirent+0x6d/0xf0
sysfs_do_create_link+0xbe/0x1f0
notifier_call_chain+0x44/0x60
pci_device_probe+0xf7/0x100
driver_probe_device+0x60/0x1f0
pci_match_device+0xf/0xa0
driver_probe_device+0x1f0/0x1f0
driver_attach+0x79/0x80
bus_for_each_dev+0x38/0x70
driver_attach+0x16/0x20
driver_probe_device+0x1f0/0x1f0
bus_add_driver+0x16f/0x250
pci_dev_put+0x20/0x20
driver_register+0x63/0x130
process_scheduled_works+0x30/0x30
cnic_init+0x7f/0x7f
__pci_register_driver+0x3c/0xa0
cnic_init+0x7f/0x7f
bnx2x_init+0x71/0x94
do_one_initcall+0x112/0x160
kernel_init+0x10f/0x1ab
do_early_param+0x77/0x77
start_kernel+0x327/0x327
kernel_thread_helper+0x6/0xd
bnx2x 0000:01:00.0: irq 132 for MSI/MSI-X
bnx2x 0000:01:00.0: irq 133 for MSI/MSI-X
bnx2x 0000:01:00.0: irq 134 for MSI/MSI-X
bnx2x 0000:01:00.0: irq 135 for MSI/MSI-X
bnx2x 0000:01:00.0: irq 136 for MSI/MSI-X
bnx2x 0000:01:00.0: irq 137 for MSI/MSI-X
bnx2x 0000:01:00.0: irq 138 for MSI/MSI-X
bnx2x 0000:01:00.0: irq 139 for MSI/MSI-X
bnx2x 0000:01:00.0: irq 140 for MSI/MSI-X
bnx2x 0000:01:00.0: irq 141 for MSI/MSI-X
bnx2x 0000:01:00.0: irq 142 for MSI/MSI-X
bnx2x 0000:01:00.0: irq 143 for MSI/MSI-X
bnx2x 0000:01:00.0: irq 144 for MSI/MSI-X
bnx2x 0000:01:00.0: irq 145 for MSI/MSI-X
bnx2x 0000:01:00.0: irq 146 for MSI/MSI-X
bnx2x 0000:01:00.0: irq 147 for MSI/MSI-X
bnx2x 0000:01:00.0: irq 148 for MSI/MSI-X
bnx2x 0000:01:00.0: eth0: Added CNIC device
bnx2x 0000:01:00.1: part number 394D4342-31383735-30315430-473030
--
Met vriendelijke groet,
Stefan Bottelier
Ocius Internet Services
E: Stefan.Bottelier@ocius.nl
T: +31 (0)20 716 39 09
W: http://www.ocius.nl
next reply other threads:[~2014-10-24 9:00 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-24 8:42 Stefan Bottelier | Ocius.nl [this message]
2014-10-26 9:07 ` Problem with 10Gbit Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver Yuval Mintz
2014-10-27 8:42 ` Stefan Bottelier | Ocius.nl
[not found] ` <B5657A6538887040AD3A81F1008BEC63B860DB@avmb3.qlogic.org>
[not found] ` <544E6597.2040201@ocius.nl>
[not found] ` <B5657A6538887040AD3A81F1008BEC63B86A3E@avmb3.qlogic.org>
[not found] ` <B5657A6538887040AD3A81F1008BEC63B86AD9@avmb3.qlogic.org>
[not found] ` <544F5454.3000103@ocius.nl>
[not found] ` <B5657A6538887040AD3A81F1008BEC63B86E04@avmb3.qlogic.org>
[not found] ` <544F68D2.9090902@ocius.nl>
[not found] ` <B5657A6538887040AD3A81F1008BEC63B86E89@avmb3.qlogic.org>
[not found] ` <544F6CA9.3080705@ocius.nl>
[not found] ` <B5657A6538887040AD3A81F1008BEC63B86EA5@avmb3.qlogic.org>
[not found] ` <544F7B33.5020204@ocius.nl>
[not found] ` <B5657A6538887040AD3A81F1008BEC63B86FA2@avmb3.qlogic.org>
[not found] ` <544F8C29.6040305@ocius.nl>
[not found] ` <B5657A6538887040AD3A81F1008BEC63B87028@avmb3.qlogic.org>
[not found] ` <544F8E96.2020904@ocius.nl>
[not found] ` <B5657A6538887 040AD3A81F1008BEC63B87612@avmb3.qlogic.org>
[not found] ` <B5657A6538887040AD3A81F1008BEC63B87612@avmb3.qlogic.org>
2014-10-28 14:07 ` Stefan Bottelier | Ocius.nl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=544A110C.4030402@ocius.nl \
--to=stefan@ocius.nl \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).