From: Florian Fainelli <f.fainelli@gmail.com>
To: Guenter Roeck <linux@roeck-us.net>, netdev@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>,
Andrew Lunn <andrew@lunn.ch>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 01/15] net: dsa: Don't set skb->protocol on outgoing tagged packets
Date: Tue, 28 Oct 2014 12:19:21 -0700 [thread overview]
Message-ID: <544FEC39.4060903@gmail.com> (raw)
In-Reply-To: <1414342365-27191-2-git-send-email-linux@roeck-us.net>
On 10/26/2014 09:52 AM, Guenter Roeck wrote:
> Setting skb->protocol to a private protocol type may result in warning
> messages such as
> e1000e 0000:00:19.0 em1: checksum_partial proto=dada!
>
> This happens if the L3 protocol is IP or IPv6 and skb->ip_summed is set
> to CHECKSUM_PARTIAL. Looking through the code, it appears that changing
> skb->protocol for transmitted packets is not necessary and may actually
> be harmful. Drop it.
You could emphasize that overriding skb->protocol prevents purposely
unmodified (from a DSA perspective) network drivers from properly
setting up their transmit checksum offload pointers since they inspect
skb->protocol to setup the IPv4 header or IPv6 header pointers.
>
> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
> ---
> v2:
> - No change
>
> net/dsa/tag_dsa.c | 2 --
> net/dsa/tag_edsa.c | 2 --
> net/dsa/tag_trailer.c | 2 --
> 3 files changed, 6 deletions(-)
>
> diff --git a/net/dsa/tag_dsa.c b/net/dsa/tag_dsa.c
> index ce90c8b..2dab270 100644
> --- a/net/dsa/tag_dsa.c
> +++ b/net/dsa/tag_dsa.c
> @@ -63,8 +63,6 @@ static netdev_tx_t dsa_xmit(struct sk_buff *skb, struct net_device *dev)
> dsa_header[3] = 0x00;
> }
>
> - skb->protocol = htons(ETH_P_DSA);
> -
> skb->dev = p->parent->dst->master_netdev;
> dev_queue_xmit(skb);
>
> diff --git a/net/dsa/tag_edsa.c b/net/dsa/tag_edsa.c
> index 94fcce7..9aeda59 100644
> --- a/net/dsa/tag_edsa.c
> +++ b/net/dsa/tag_edsa.c
> @@ -76,8 +76,6 @@ static netdev_tx_t edsa_xmit(struct sk_buff *skb, struct net_device *dev)
> edsa_header[7] = 0x00;
> }
>
> - skb->protocol = htons(ETH_P_EDSA);
> -
> skb->dev = p->parent->dst->master_netdev;
> dev_queue_xmit(skb);
>
> diff --git a/net/dsa/tag_trailer.c b/net/dsa/tag_trailer.c
> index 115fdca..e268f9d 100644
> --- a/net/dsa/tag_trailer.c
> +++ b/net/dsa/tag_trailer.c
> @@ -57,8 +57,6 @@ static netdev_tx_t trailer_xmit(struct sk_buff *skb, struct net_device *dev)
> trailer[2] = 0x10;
> trailer[3] = 0x00;
>
> - nskb->protocol = htons(ETH_P_TRAILER);
> -
> nskb->dev = p->parent->dst->master_netdev;
> dev_queue_xmit(nskb);
>
>
next prev parent reply other threads:[~2014-10-28 19:19 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-26 16:52 [PATCH v2 00/15] net: dsa: Fixes and enhancements Guenter Roeck
2014-10-26 16:52 ` [PATCH v2 01/15] net: dsa: Don't set skb->protocol on outgoing tagged packets Guenter Roeck
2014-10-28 19:19 ` Florian Fainelli [this message]
2014-10-28 19:23 ` Guenter Roeck
2014-10-26 16:52 ` [PATCH v2 02/15] net: dsa: Report known silicon revisions for Marvell 88E6060 Guenter Roeck
2014-10-26 16:52 ` [PATCH v2 03/15] net: dsa: Report known silicon revisions for Marvell 88E6131 Guenter Roeck
2014-10-26 16:52 ` [PATCH v2 04/15] net: dsa: Add support for Marvell 88E6352 Guenter Roeck
2014-10-26 16:52 ` [PATCH v2 05/15] net: dsa/mv88e6352: Add support for MV88E6176 Guenter Roeck
2014-10-26 16:52 ` [PATCH v2 06/15] net: dsa: Add support for reporting switch chip temperatures Guenter Roeck
2014-10-26 16:52 ` [PATCH v2 07/15] net: dsa/mv88e6352: Report chip temperature Guenter Roeck
2014-10-26 16:52 ` [PATCH v2 08/15] net: dsa/mv88e6123_61_65: " Guenter Roeck
2014-10-26 16:52 ` [PATCH v2 09/15] net: dsa: Add support for switch EEPROM access Guenter Roeck
2014-10-27 2:41 ` Andrew Lunn
2014-10-27 3:56 ` Guenter Roeck
2014-10-27 8:50 ` Richard Cochran
2014-10-27 13:22 ` Guenter Roeck
2014-10-27 13:59 ` Andrew Lunn
2014-10-27 15:42 ` Guenter Roeck
2014-10-28 13:31 ` Guenter Roeck
2014-10-28 16:49 ` [PATCH v3 " Guenter Roeck
2014-10-28 18:19 ` David Miller
2014-10-28 19:21 ` Guenter Roeck
2014-10-26 16:52 ` [PATCH v2 10/15] dsa: Add new optional devicetree property to describe EEPROM size Guenter Roeck
2014-10-28 16:50 ` [PATCH v3 " Guenter Roeck
2014-10-26 16:52 ` [PATCH v2 11/15] net: dsa/mv88e6352: Implement EEPROM access functions Guenter Roeck
2014-10-26 16:52 ` [PATCH v2 12/15] net: dsa: Add support for reading switch registers with ethtool Guenter Roeck
2014-10-26 16:52 ` [PATCH v2 13/15] net: dsa/mv88e6123_61_65: Add support for reading switch registers Guenter Roeck
2014-10-26 16:52 ` [PATCH v2 14/15] net: dsa/mv88e6352: " Guenter Roeck
2014-10-26 16:52 ` [PATCH v2 15/15] net: dsa: Provide additional RMON statistics Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=544FEC39.4060903@gmail.com \
--to=f.fainelli@gmail.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).