Re: [PATCH v5 6/8] net: can: c_can: Disable pins when CAN interface is down

[Marc Kleine-Budde <mkl@pengutronix.de>]

[-- Attachment #1: Type: text/plain, Size: 4856 bytes --]

On 11/12/2014 03:16 PM, Roger Quadros wrote:
> DRA7 CAN IP suffers from a problem which causes it to be prevented
> from fully turning OFF (i.e. stuck in transition) if the module was
> disabled while there was traffic on the CAN_RX line.
> 
> To work around this issue we select the SLEEP pin state by default
> on probe and use the DEFAULT pin state on CAN up and back to the
> SLEEP pin state on CAN down.
> 
> Signed-off-by: Roger Quadros <rogerq@ti.com>
> ---
>  drivers/net/can/c_can/c_can.c          | 21 +++++++++++++++++++++
>  drivers/net/can/c_can/c_can.h          |  1 +
>  drivers/net/can/c_can/c_can_platform.c | 20 ++++++++++++++++++++
>  3 files changed, 42 insertions(+)
> 
> diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
> index 8e78bb4..a950eea 100644
> --- a/drivers/net/can/c_can/c_can.c
> +++ b/drivers/net/can/c_can/c_can.c
> @@ -35,6 +35,7 @@
>  #include <linux/list.h>
>  #include <linux/io.h>
>  #include <linux/pm_runtime.h>
> +#include <linux/pinctrl/consumer.h>
>  
>  #include <linux/can.h>
>  #include <linux/can/dev.h>
> @@ -587,6 +588,21 @@ static int c_can_chip_config(struct net_device *dev)
>  	return c_can_set_bittiming(dev);
>  }
>  
> +/*
> + * Selects the pinctrl state specified in the name.
> + */
> +static void c_can_pinctrl_select_state(struct c_can_priv *priv,
> +				      const char *name)
> +{
> +	if (!IS_ERR(priv->pinctrl)) {

What happens if priv->pinctrl is NULL? This is probably the case with
the c_can_pci driver.

> +		struct pinctrl_state *s;
> +
> +		s = pinctrl_lookup_state(priv->pinctrl, name);
> +		if (!IS_ERR(s))
> +			pinctrl_select_state(priv->pinctrl, s);
> +	}
> +}
> +
>  static int c_can_start(struct net_device *dev)
>  {
>  	struct c_can_priv *priv = netdev_priv(dev);
> @@ -603,6 +619,8 @@ static int c_can_start(struct net_device *dev)
>  
>  	priv->can.state = CAN_STATE_ERROR_ACTIVE;
>  
> +	/* activate pins */
> +	c_can_pinctrl_select_state(priv, PINCTRL_STATE_DEFAULT);
>  	return 0;
>  }
>  
> @@ -611,6 +629,9 @@ static void c_can_stop(struct net_device *dev)
>  	struct c_can_priv *priv = netdev_priv(dev);
>  
>  	c_can_irq_control(priv, false);
> +
> +	/* deactivate pins */
> +	c_can_pinctrl_select_state(priv, PINCTRL_STATE_SLEEP);
>  	priv->can.state = CAN_STATE_STOPPED;
>  }
>  
> diff --git a/drivers/net/can/c_can/c_can.h b/drivers/net/can/c_can/c_can.h
> index c6715ca..3cedf48 100644
> --- a/drivers/net/can/c_can/c_can.h
> +++ b/drivers/net/can/c_can/c_can.h
> @@ -210,6 +210,7 @@ struct c_can_priv {
>  	u32 comm_rcv_high;
>  	u32 rxmasked;
>  	u32 dlc[C_CAN_MSG_OBJ_TX_NUM];
> +	struct pinctrl *pinctrl;
>  };
>  
>  struct net_device *alloc_c_can_dev(void);
> diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c
> index b838c6b..71b9063 100644
> --- a/drivers/net/can/c_can/c_can_platform.c
> +++ b/drivers/net/can/c_can/c_can_platform.c
> @@ -34,6 +34,7 @@
>  #include <linux/of_device.h>
>  #include <linux/mfd/syscon.h>
>  #include <linux/regmap.h>
> +#include <linux/pinctrl/consumer.h>
>  
>  #include <linux/can/dev.h>
>  
> @@ -230,6 +231,7 @@ static int c_can_plat_probe(struct platform_device *pdev)
>  	struct clk *clk;
>  	const struct c_can_driver_data *drvdata;
>  	struct device_node *np = pdev->dev.of_node;
> +	struct pinctrl *pinctrl;
>  
>  	match = of_match_device(c_can_of_table, &pdev->dev);
>  	if (match) {
> @@ -241,6 +243,23 @@ static int c_can_plat_probe(struct platform_device *pdev)
>  		return -ENODEV;
>  	}
>  
> +	pinctrl = devm_pinctrl_get(&pdev->dev);
> +	if (!IS_ERR(pinctrl)) {
> +		struct pinctrl_state *s;
> +
> +		/* Deactivate pins to prevent DRA7 DCAN IP from being
> +		 * stuck in transition when module is disabled.
> +		 * Pins are activated in c_can_start() and deactivated
> +		 * in c_can_stop()
> +		 */
> +		s = pinctrl_lookup_state(pinctrl, PINCTRL_STATE_SLEEP);
> +		if (!IS_ERR(s))
> +			pinctrl_select_state(pinctrl, s);
> +	} else {
> +		dev_warn(&pdev->dev,
> +			 "failed to get pinctrl\n");
> +	}

Can you move the initial setting into c_can.c, register_c_can_dev()
should be a good candidate.

> +
>  	/* get the appropriate clk */
>  	clk = devm_clk_get(&pdev->dev, NULL);
>  	if (IS_ERR(clk)) {
> @@ -270,6 +289,7 @@ static int c_can_plat_probe(struct platform_device *pdev)
>  	}
>  
>  	priv = netdev_priv(dev);
> +	priv->pinctrl = pinctrl;
>  
>  	switch (drvdata->id) {
>  	case BOSCH_C_CAN:
> 

Marc

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]