From: Marc Kleine-Budde <mkl@pengutronix.de>
To: Roger Quadros <rogerq@ti.com>, wg@grandegger.com
Cc: wsa@the-dreams.de, tony@atomide.com, tglx@linutronix.de,
mugunthanvnm@ti.com, george.cherian@ti.com, balbi@ti.com,
nsekhar@ti.com, nm@ti.com, sergei.shtylyov@cogentembedded.com,
linux-omap@vger.kernel.org, linux-can@vger.kernel.org,
netdev@vger.kernel.org
Subject: Re: [PATCH v4 7/8] net: can: c_can: Add support for TI DRA7 DCAN
Date: Fri, 14 Nov 2014 16:56:37 +0100 [thread overview]
Message-ID: <54662635.5020101@pengutronix.de> (raw)
In-Reply-To: <1415371762-29885-8-git-send-email-rogerq@ti.com>
[-- Attachment #1: Type: text/plain, Size: 2131 bytes --]
On 11/07/2014 03:49 PM, Roger Quadros wrote:
> DRA7 SoC has 2 CAN IPs. Provide compatible IDs and RAMINIT
> register data for both.
>
> Signed-off-by: Roger Quadros <rogerq@ti.com>
> ---
> Documentation/devicetree/bindings/net/can/c_can.txt | 1 +
> drivers/net/can/c_can/c_can_platform.c | 11 +++++++++++
> 2 files changed, 12 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/net/can/c_can.txt b/Documentation/devicetree/bindings/net/can/c_can.txt
> index a3ca3ee..f682fdb 100644
> --- a/Documentation/devicetree/bindings/net/can/c_can.txt
> +++ b/Documentation/devicetree/bindings/net/can/c_can.txt
> @@ -4,6 +4,7 @@ Bosch C_CAN/D_CAN controller Device Tree Bindings
> Required properties:
> - compatible : Should be "bosch,c_can" for C_CAN controllers and
> "bosch,d_can" for D_CAN controllers.
> + Can be "ti,dra7-d_can".
> - reg : physical base address and size of the C_CAN/D_CAN
> registers map
> - interrupts : property with a value describing the interrupt
> diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c
> index 71b9063..7a81db4 100644
> --- a/drivers/net/can/c_can/c_can_platform.c
> +++ b/drivers/net/can/c_can/c_can_platform.c
> @@ -195,6 +195,16 @@ static struct c_can_driver_data d_can_drvdata = {
> .id = BOSCH_D_CAN,
> };
>
> +static u8 dra7_raminit_start_bits[] = {3, 5};
> +static u8 dra7_raminit_done_bits[] = {1, 2};
> +static struct c_can_driver_data dra7_dcan_drvdata = {
> + .id = BOSCH_D_CAN,
> + .num_can = 2,
^
Replaced by ARRAY_SIZE(dra7_raminit_start_bits)
Same for the am3352_dcan_drvdata in the next patch.
> + .raminit_start_bits = dra7_raminit_start_bits,
> + .raminit_done_bits = dra7_raminit_done_bits,
> + .raminit_pulse = true,
> +};
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
next prev parent reply other threads:[~2014-11-14 15:56 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-07 14:49 [PATCH v4 0/8] net: can: Use syscon regmap for TI specific RAMINIT register Roger Quadros
2014-11-07 14:49 ` [PATCH v4 1/8] net: can: c_can: Add timeout to c_can_hw_raminit_ti() Roger Quadros
2014-11-07 14:49 ` [PATCH v4 2/8] net: can: c_can: Introduce c_can_driver_data structure Roger Quadros
2014-11-13 10:57 ` Marc Kleine-Budde
2014-11-07 14:49 ` [PATCH v4 3/8] net: can: c_can: Add RAMINIT register information to driver data Roger Quadros
2014-11-13 10:59 ` Marc Kleine-Budde
2014-11-14 17:55 ` Marc Kleine-Budde
2014-11-17 11:17 ` Roger Quadros
2014-11-17 11:22 ` Marc Kleine-Budde
2014-11-17 11:29 ` Roger Quadros
2014-11-07 14:49 ` [PATCH v4 4/8] net: can: c_can: Add syscon/regmap RAMINIT mechanism Roger Quadros
2014-11-13 11:09 ` Marc Kleine-Budde
2014-11-13 12:09 ` Roger Quadros
2014-11-13 12:58 ` Marc Kleine-Budde
2014-11-13 12:44 ` Marc Kleine-Budde
2014-11-13 13:07 ` Roger Quadros
2014-11-14 15:37 ` [PATCH v5 " Roger Quadros
2014-11-14 16:32 ` Marc Kleine-Budde
2014-11-14 16:42 ` Roger Quadros
2014-11-07 14:49 ` [PATCH v4 5/8] net: can: c_can: Add support for START pulse in RAMINIT sequence Roger Quadros
2014-11-07 14:49 ` [PATCH v4 6/8] net: can: c_can: Disable pins when CAN interface is down Roger Quadros
2014-11-07 14:54 ` Marc Kleine-Budde
2014-11-10 9:00 ` Roger Quadros
2014-11-12 14:16 ` [PATCH v5 " Roger Quadros
2014-11-13 12:56 ` Marc Kleine-Budde
2014-11-13 13:04 ` Roger Quadros
2014-11-13 15:23 ` Roger Quadros
2014-11-13 16:03 ` Marc Kleine-Budde
2014-11-14 13:43 ` Roger Quadros
2014-11-27 13:28 ` Linus Walleij
2014-11-14 15:40 ` [PATCH v7 " Roger Quadros
2014-11-14 15:49 ` Marc Kleine-Budde
2014-11-14 16:04 ` Roger Quadros
2014-11-27 13:26 ` Linus Walleij
2014-11-27 21:19 ` Marc Kleine-Budde
2014-11-28 9:22 ` Roger Quadros
2014-11-07 14:49 ` [PATCH v4 7/8] net: can: c_can: Add support for TI DRA7 DCAN Roger Quadros
2014-11-14 15:56 ` Marc Kleine-Budde [this message]
2014-11-07 14:49 ` [PATCH v4 8/8] net: can: c_can: Add support for TI am3352 DCAN Roger Quadros
2014-11-13 16:06 ` Wolfram Sang
2014-11-14 9:25 ` Marc Kleine-Budde
2014-11-14 11:26 ` Wolfram Sang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54662635.5020101@pengutronix.de \
--to=mkl@pengutronix.de \
--cc=balbi@ti.com \
--cc=george.cherian@ti.com \
--cc=linux-can@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=mugunthanvnm@ti.com \
--cc=netdev@vger.kernel.org \
--cc=nm@ti.com \
--cc=nsekhar@ti.com \
--cc=rogerq@ti.com \
--cc=sergei.shtylyov@cogentembedded.com \
--cc=tglx@linutronix.de \
--cc=tony@atomide.com \
--cc=wg@grandegger.com \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).