From: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
To: Nils Holland <nholland@tisys.org>, netdev@vger.kernel.org
Subject: Re: tg3 broken in 3.18.0?
Date: Thu, 11 Dec 2014 14:45:48 -0200 [thread overview]
Message-ID: <5489CA3C.10803@gmail.com> (raw)
In-Reply-To: <20141210230634.GA22884@teela.fritz.box>
On 10-12-2014 21:06, Nils Holland wrote:
> Hi everyone,
>
> I just upgraded a machine from 3.17.3 to 3.18.0 and noticed that after
> the upgrade, the machine's network interface (which is a tg3) would no
> longer run correctly (or, for that matter, run at all). During the
> upgrade, I didn't change any kernel config options or any other parts
> of the system.
Same thing here! Thanks for reporting this, Nils.
> Since the machine is remote and I don't have direct access to it, it's
> kind of hard currently to give more details, but here's what I'm
> seeing in the logs:
I have access to mine, kudos to secondary NIC.
$ ethtool -i p1p1
driver: tg3
version: 3.137
firmware-version: 5722-v3.13
bus-info: 0000:02:00.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: no
$ ethtool p1p1
Settings for p1p1:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Supported pause frame use: No
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: Yes
Speed: Unknown!
Duplex: Unknown! (255)
Port: Twisted Pair
PHYAD: 1
Transceiver: internal
Auto-negotiation: on
MDI-X: Unknown
$ sudo ip link set p1p1 up
RTNETLINK answers: No such device
> If I see things correctly, there were only two patches affecting tg3
> between 3.17(.3) and 3.18:
>
> 2c7c9ea429ba30fe506747b7da110e2212d8fefa
> a620a6bc1c94c22d6c312892be1e0ae171523125
I'm running net-next, 395eea6ccf2b253f81b4718ffbcae67d36fe2e69.
So my diffs would be:
$ git log v3.17..origin/master --oneline -- drivers/net/ethernet/broadcom/tg3.c
892311f ethtool: Support for configurable RSS hash function
60b7379 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
a620a6b tg3: fix ring init when there are more TX than RX channels
3964835 tg3: use netdev_rss_key_fill() helper
2c7c9ea tg3: Add skb->xmit_more support
Reverting all these, issue continues.
If no one has a better shot, I'll try bissecting later.
Marcelo
next prev parent reply other threads:[~2014-12-11 16:45 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-10 23:06 tg3 broken in 3.18.0? Nils Holland
2014-12-11 16:45 ` Marcelo Ricardo Leitner [this message]
2014-12-12 14:50 ` Jonathan Bither
2014-12-12 20:31 ` Nils Holland
2014-12-13 1:14 ` [bisected] " Nils Holland
2014-12-13 1:18 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5489CA3C.10803@gmail.com \
--to=marcelo.leitner@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=nholland@tisys.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).