From: Marc Kleine-Budde <mkl@pengutronix.de>
To: "Ahmed S. Darwish" <darwish.07@gmail.com>,
Olivier Sobrie <olivier@sobrie.be>
Cc: Oliver Hartkopp <socketcan@hartkopp.net>,
Wolfgang Grandegger <wg@grandegger.com>,
"David S. Miller" <davem@davemloft.net>,
Paul Gortmaker <paul.gortmaker@windriver.com>,
Linux-CAN <linux-can@vger.kernel.org>,
netdev <netdev@vger.kernel.org>,
LKML <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v4 3/4] can: kvaser_usb: Add support for the Usbcan-II family
Date: Sun, 18 Jan 2015 21:13:57 +0100 [thread overview]
Message-ID: <54BC1405.8010207@pengutronix.de> (raw)
In-Reply-To: <20150118201221.GA15143@linux>
[-- Attachment #1: Type: text/plain, Size: 2137 bytes --]
On 01/18/2015 09:12 PM, Ahmed S. Darwish wrote:
> Hi!
>
> On Mon, Jan 12, 2015 at 02:53:02PM +0100, Olivier Sobrie wrote:
>> Hello,
>>
>> On Sun, Jan 11, 2015 at 03:36:12PM -0500, Ahmed S. Darwish wrote:
>>> From: Ahmed S. Darwish <ahmed.darwish@valeo.com>
>>>
>
> ...
>
>>> @@ -98,7 +128,13 @@
>>> #define CMD_START_CHIP_REPLY 27
>>> #define CMD_STOP_CHIP 28
>>> #define CMD_STOP_CHIP_REPLY 29
>>> -#define CMD_GET_CARD_INFO2 32
>>> +#define CMD_READ_CLOCK 30
>>> +#define CMD_READ_CLOCK_REPLY 31
>>
>> These two defines are not used.
>>
>
> They were added for completeness: the only gap in our continuous
> sequence of command IDs from 12 to 39 ;-) No big deal, to be
> removed in the next submission.
>
> ...
>
>>> +
>>> +struct kvaser_msg_tx_acknowledge_header {
>>> + u8 channel;
>>> + u8 tid;
>>> +};
>>
>> Is this struct really needed? Can't you simply use
>> leaf_msg_tx_acknowledge or usbcan_msg_tx_acknowledge
>> structures to read the header.
>> Same for kvaser_msg_rx_can_header.
>>
>
> They're added to ensure type-safety throughout the code. Basically
> they're the common part of a command that has different wire format
> between the Leaf and the USBCan, but share a common header. Such
> notation was only added when it was strictly necessary.
>
> For example, there are three functions where 'rx_can_header' is
> referenced in the driver, and one function where 'tx_acknowledge_header'
> is referenced. Without such header structure, I'll have to sprinkle
> 3 to 4 extra blocks of:
>
> switch (dev->family) {
> case KVASER_LEAF:
> case KVASER_USBCAN:
> }
>
> which would be _really_ ugly. The *_header notation ensures that, in
> the body of each function, we're accessing the fields in a very safe
> manner.
+1 Keep it as it is.
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
next prev parent reply other threads:[~2015-01-18 20:13 UTC|newest]
Thread overview: 95+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-23 15:46 [PATCH] can: kvaser_usb: Don't free packets when tight on URBs Ahmed S. Darwish
2014-12-23 15:53 ` [PATCH] can: kvaser_usb: Add support for the Usbcan-II family Ahmed S. Darwish
2014-12-24 12:36 ` Olivier Sobrie
2014-12-24 15:04 ` Ahmed S. Darwish
2014-12-28 21:51 ` Olivier Sobrie
2014-12-30 15:33 ` Ahmed S. Darwish
2014-12-31 12:13 ` Olivier Sobrie
2014-12-24 12:31 ` [PATCH] can: kvaser_usb: Don't free packets when tight on URBs Olivier Sobrie
2014-12-24 15:52 ` Ahmed S. Darwish
2014-12-24 23:56 ` [PATCH v2 1/4] " Ahmed S. Darwish
2014-12-24 23:59 ` [PATCH v2 2/4] can: kvaser_usb: Reset all URB tx contexts upon channel close Ahmed S. Darwish
2014-12-25 0:02 ` [PATCH v2 3/4] can: kvaser_usb: Don't send a RESET_CHIP for non-existing channels Ahmed S. Darwish
2014-12-25 0:04 ` [PATCH v2 4/4] can: kvaser_usb: Add support for the Usbcan-II family Ahmed S. Darwish
2014-12-28 21:54 ` [PATCH v2 3/4] can: kvaser_usb: Don't send a RESET_CHIP for non-existing channels Olivier Sobrie
2014-12-25 2:50 ` [PATCH v2 1/4] can: kvaser_usb: Don't free packets when tight on URBs Greg KH
2014-12-25 9:38 ` Ahmed S. Darwish
2014-12-28 21:52 ` Olivier Sobrie
2015-01-01 21:59 ` [PATCH] " Stephen Hemminger
2015-01-03 14:34 ` Ahmed S. Darwish
2015-01-05 17:49 ` [PATCH v3 1/4] " Ahmed S. Darwish
2015-01-05 17:52 ` [PATCH v3 2/4] can: kvaser_usb: Reset all URB tx contexts upon channel close Ahmed S. Darwish
2015-01-05 17:57 ` [PATCH v3 3/4] can: kvaser_usb: Don't send a RESET_CHIP for non-existing channels Ahmed S. Darwish
2015-01-05 18:31 ` [PATCH v3 4/4] can: kvaser_usb: Add support for the Usbcan-II family Ahmed S. Darwish
2015-01-08 11:53 ` Marc Kleine-Budde
2015-01-08 15:19 ` Ahmed S. Darwish
2015-01-12 11:51 ` Marc Kleine-Budde
2015-01-12 12:26 ` Ahmed S. Darwish
2015-01-12 12:34 ` Marc Kleine-Budde
2015-01-09 3:06 ` Ahmed S. Darwish
2015-01-09 14:05 ` Marc Kleine-Budde
2015-01-08 9:59 ` [PATCH v3 1/4] can: kvaser_usb: Don't free packets when tight on URBs Marc Kleine-Budde
2015-01-11 20:05 ` [PATCH v4 00/04] can: Introduce support for Kvaser USBCAN-II devices Ahmed S. Darwish
2015-01-11 20:11 ` [PATCH v4 01/04] can: kvaser_usb: Don't dereference skb after a netif_rx() devices Ahmed S. Darwish
2015-01-11 20:15 ` [PATCH v4 2/4] can: kvaser_usb: Update error counters before exiting on OOM Ahmed S. Darwish
2015-01-11 20:36 ` [PATCH v4 3/4] can: kvaser_usb: Add support for the Usbcan-II family Ahmed S. Darwish
2015-01-11 20:45 ` [PATCH v4 4/4] can: kvaser_usb: Retry first bulk transfer on -ETIMEDOUT Ahmed S. Darwish
2015-01-11 20:51 ` Marc Kleine-Budde
2015-01-12 10:14 ` Ahmed S. Darwish
2015-01-12 10:25 ` Marc Kleine-Budde
2015-01-12 13:33 ` Olivier Sobrie
2015-01-12 13:50 ` Ahmed S. Darwish
2015-01-12 11:20 ` [PATCH v4 3/4] can: kvaser_usb: Add support for the Usbcan-II family Ahmed S. Darwish
2015-01-12 11:43 ` Marc Kleine-Budde
2015-01-12 12:07 ` Ahmed S. Darwish
2015-01-12 12:36 ` Ahmed S. Darwish
2015-01-12 13:53 ` Olivier Sobrie
2015-01-18 20:12 ` Ahmed S. Darwish
2015-01-18 20:13 ` Marc Kleine-Budde [this message]
2015-01-12 11:09 ` [PATCH v4 2/4] can: kvaser_usb: Update error counters before exiting on OOM Marc Kleine-Budde
2015-01-12 20:36 ` Ahmed S. Darwish
2015-01-16 14:39 ` Marc Kleine-Budde
2015-01-11 20:49 ` [PATCH v4 01/04] can: kvaser_usb: Don't dereference skb after a netif_rx() Ahmed S. Darwish
2015-01-12 11:05 ` Marc Kleine-Budde
2015-01-20 21:44 ` [PATCH v5 1/5] can: kvaser_usb: Update net interface state before exiting on OOM Ahmed S. Darwish
2015-01-20 21:45 ` [PATCH v5 2/5] can: kvaser_usb: Consolidate and unify state change handling Ahmed S. Darwish
2015-01-20 21:47 ` [PATCH v5 3/5] can: kvaser_usb: Fix state handling upon BUS_ERROR events Ahmed S. Darwish
2015-01-20 21:48 ` [PATCH v5 4/5] can: kvaser_usb: Retry the first bulk transfer on -ETIMEDOUT Ahmed S. Darwish
2015-01-20 21:50 ` [PATCH v5 5/5] can: kvaser_usb: Add support for the USBcan-II family Ahmed S. Darwish
2015-01-21 12:24 ` [PATCH v5 4/5] can: kvaser_usb: Retry the first bulk transfer on -ETIMEDOUT Sergei Shtylyov
2015-01-25 11:59 ` Ahmed S. Darwish
2015-01-21 10:33 ` [PATCH v5 2/5] can: kvaser_usb: Consolidate and unify state change handling Andri Yngvason
2015-01-21 10:44 ` Marc Kleine-Budde
2015-01-21 11:00 ` Andri Yngvason
2015-01-21 11:53 ` Wolfgang Grandegger
2015-01-21 14:43 ` Ahmed S. Darwish
2015-01-21 15:00 ` Andri Yngvason
2015-01-21 15:36 ` Ahmed S. Darwish
2015-01-21 16:13 ` Wolfgang Grandegger
2015-01-23 6:07 ` Ahmed S. Darwish
2015-01-23 10:32 ` Andri Yngvason
2015-01-25 2:43 ` Ahmed S. Darwish
2015-01-26 10:21 ` Andri Yngvason
2015-01-21 16:37 ` Andri Yngvason
2015-01-21 16:20 ` Andri Yngvason
2015-01-21 22:59 ` Marc Kleine-Budde
2015-01-22 10:14 ` Andri Yngvason
2015-01-25 2:49 ` Ahmed S. Darwish
2015-01-25 3:21 ` Ahmed S. Darwish
2015-01-26 5:17 ` [PATCH v6 0/7] can: kvaser_usb: Leaf bugfixes and USBCan-II support Ahmed S. Darwish
2015-01-26 5:20 ` [PATCH v6 1/7] can: kvaser_usb: Do not sleep in atomic context Ahmed S. Darwish
2015-01-26 5:22 ` [PATCH v6 2/7] can: kvaser_usb: Send correct context to URB completion Ahmed S. Darwish
2015-01-26 5:24 ` [PATCH v6 3/7] can: kvaser_usb: Retry the first bulk transfer on -ETIMEDOUT Ahmed S. Darwish
2015-01-26 5:25 ` [PATCH v6 4/7] can: kvaser_usb: Fix state handling upon BUS_ERROR events Ahmed S. Darwish
2015-01-26 5:27 ` [PATCH v6 5/7] can: kvaser_usb: Update interface state before exiting on OOM Ahmed S. Darwish
2015-01-26 5:29 ` [PATCH v6 6/7] can: kvaser_usb: Consolidate and unify state change handling Ahmed S. Darwish
2015-01-26 5:33 ` [PATCH v6 7/7] can: kvaser_usb: Add support for the USBcan-II family Ahmed S. Darwish
2015-01-26 10:34 ` Andri Yngvason
2015-01-26 10:26 ` [PATCH v6 6/7] can: kvaser_usb: Consolidate and unify state change handling Andri Yngvason
2015-01-26 10:28 ` [PATCH v6 5/7] can: kvaser_usb: Update interface state before exiting on OOM Andri Yngvason
2015-01-26 10:50 ` Marc Kleine-Budde
2015-01-26 10:52 ` Andri Yngvason
2015-01-26 10:53 ` Marc Kleine-Budde
2015-01-26 9:55 ` [PATCH v6 0/7] can: kvaser_usb: Leaf bugfixes and USBCan-II support Marc Kleine-Budde
2015-01-26 10:07 ` Marc Kleine-Budde
2015-01-26 10:56 ` Marc Kleine-Budde
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54BC1405.8010207@pengutronix.de \
--to=mkl@pengutronix.de \
--cc=darwish.07@gmail.com \
--cc=davem@davemloft.net \
--cc=linux-can@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=olivier@sobrie.be \
--cc=paul.gortmaker@windriver.com \
--cc=socketcan@hartkopp.net \
--cc=wg@grandegger.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).