From: Florian Fainelli <f.fainelli@gmail.com>
To: Guenter Roeck <linux@roeck-us.net>,
"David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org, Andrew Lunn <andrew@lunn.ch>
Subject: Re: [PATCH] net: dsa: Set valid phy interface type
Date: Tue, 17 Feb 2015 09:04:48 -0800 [thread overview]
Message-ID: <54E374B0.5070603@gmail.com> (raw)
In-Reply-To: <1424150631-22396-1-git-send-email-linux@roeck-us.net>
On 16/02/15 21:23, Guenter Roeck wrote:
> If the phy interface mode is not found in devicetree, or if devicetree
> is not configured, of_get_phy_mode returns -ENODEV. The current code
> sets the phy interface mode to the return value from of_get_phy_mode
> without checking if it is valid.
>
> This invalid phy interface mode is passed as parameter to of_phy_connect
> or to phy_connect_direct. This sets the phy interface mode to the invalid
> value, which in turn causes problems for any code using phydev->interface.
>
> Fixes: b31f65fb4383 ("net: dsa: slave: Fix autoneg for phys on switch MDIO bus")
> Fixes: 0d8bcdd383b8 ("net: dsa: allow for more complex PHY setups")
> Cc: Florian Fainelli <f.fainelli@gmail.com>
> Cc: Andrew Lunn <andrew@lunn.ch>
> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
This is 'net' material since you are fixing a bug here, thanks!
> ---
> net/dsa/slave.c | 9 +++++++--
> 1 file changed, 7 insertions(+), 2 deletions(-)
>
> diff --git a/net/dsa/slave.c b/net/dsa/slave.c
> index d104ae1..f23dead 100644
> --- a/net/dsa/slave.c
> +++ b/net/dsa/slave.c
> @@ -521,10 +521,13 @@ static int dsa_slave_phy_setup(struct dsa_slave_priv *p,
> struct device_node *phy_dn, *port_dn;
> bool phy_is_fixed = false;
> u32 phy_flags = 0;
> - int ret;
> + int mode, ret;
>
> port_dn = cd->port_dn[p->port];
> - p->phy_interface = of_get_phy_mode(port_dn);
> + mode = of_get_phy_mode(port_dn);
> + if (mode < 0)
> + mode = PHY_INTERFACE_MODE_NA;
> + p->phy_interface = mode;
>
> phy_dn = of_parse_phandle(port_dn, "phy-handle", 0);
> if (of_phy_is_fixed_link(port_dn)) {
> @@ -559,6 +562,8 @@ static int dsa_slave_phy_setup(struct dsa_slave_priv *p,
> if (!p->phy)
> return -ENODEV;
>
> + /* Use already configured phy mode */
> + p->phy_interface = p->phy->interface;
> phy_connect_direct(slave_dev, p->phy, dsa_slave_adjust_link,
> p->phy_interface);
> } else {
>
--
Florian
next prev parent reply other threads:[~2015-02-17 17:05 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-17 5:23 [PATCH] net: dsa: Set valid phy interface type Guenter Roeck
2015-02-17 17:04 ` Florian Fainelli [this message]
2015-02-17 18:37 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54E374B0.5070603@gmail.com \
--to=f.fainelli@gmail.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=linux@roeck-us.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).