[PATCH] net: cadence: Enable MACB driver for ARM64

[PATCH] net: cadence: Enable MACB driver for ARM64

[Michal Simek]

This driver is used on new Xilinx ZynqMP SoC.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
---

 drivers/net/ethernet/cadence/Kconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/cadence/Kconfig b/drivers/net/ethernet/cadence/Kconfig
index 321d2ad235d9..4562f90c0348 100644
--- a/drivers/net/ethernet/cadence/Kconfig
+++ b/drivers/net/ethernet/cadence/Kconfig
@@ -4,7 +4,7 @@
 
 config NET_CADENCE
 	bool "Cadence devices"
-	depends on HAS_IOMEM && (ARM || AVR32 || MICROBLAZE || COMPILE_TEST)
+	depends on HAS_IOMEM && (ARM || ARM64 || AVR32 || MICROBLAZE || COMPILE_TEST)
 	default y
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y.
@@ -30,7 +30,7 @@ config ARM_AT91_ETHER
 
 config MACB
 	tristate "Cadence MACB/GEM support"
-	depends on HAS_DMA && (PLATFORM_AT32AP || ARCH_AT91 || ARCH_PICOXCELL || ARCH_ZYNQ || MICROBLAZE || COMPILE_TEST)
+	depends on HAS_DMA && (PLATFORM_AT32AP || ARCH_AT91 || ARCH_PICOXCELL || ARCH_ZYNQ || ARM64 || MICROBLAZE || COMPILE_TEST)
 	select PHYLIB
 	---help---
 	  The Cadence MACB ethernet interface is found on many Atmel AT32 and
-- 
1.8.2.3

Re: [PATCH] net: cadence: Enable MACB driver for ARM64

[Nicolas Ferre]

Le 24/02/2015 08:45, Michal Simek a écrit :
> This driver is used on new Xilinx ZynqMP SoC.
> 
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
> Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com>

I see no objection on my side:
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>

> ---
> 
>  drivers/net/ethernet/cadence/Kconfig | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/ethernet/cadence/Kconfig b/drivers/net/ethernet/cadence/Kconfig
> index 321d2ad235d9..4562f90c0348 100644
> --- a/drivers/net/ethernet/cadence/Kconfig
> +++ b/drivers/net/ethernet/cadence/Kconfig
> @@ -4,7 +4,7 @@
>  
>  config NET_CADENCE
>  	bool "Cadence devices"
> -	depends on HAS_IOMEM && (ARM || AVR32 || MICROBLAZE || COMPILE_TEST)
> +	depends on HAS_IOMEM && (ARM || ARM64 || AVR32 || MICROBLAZE || COMPILE_TEST)
>  	default y
>  	---help---
>  	  If you have a network (Ethernet) card belonging to this class, say Y.
> @@ -30,7 +30,7 @@ config ARM_AT91_ETHER
>  
>  config MACB
>  	tristate "Cadence MACB/GEM support"
> -	depends on HAS_DMA && (PLATFORM_AT32AP || ARCH_AT91 || ARCH_PICOXCELL || ARCH_ZYNQ || MICROBLAZE || COMPILE_TEST)
> +	depends on HAS_DMA && (PLATFORM_AT32AP || ARCH_AT91 || ARCH_PICOXCELL || ARCH_ZYNQ || ARM64 || MICROBLAZE || COMPILE_TEST)
>  	select PHYLIB
>  	---help---
>  	  The Cadence MACB ethernet interface is found on many Atmel AT32 and
> 


-- 
Nicolas Ferre

Re: [PATCH] net: cadence: Enable MACB driver for ARM64

[Jean-Christophe PLAGNIOL-VILLARD]

> On Feb 24, 2015, at 3:45 PM, Michal Simek <michal.simek@xilinx.com> wrote:
> 
> This driver is used on new Xilinx ZynqMP SoC.
> 
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
> Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
> ---
> 
> drivers/net/ethernet/cadence/Kconfig | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/ethernet/cadence/Kconfig b/drivers/net/ethernet/cadence/Kconfig
> index 321d2ad235d9..4562f90c0348 100644
> --- a/drivers/net/ethernet/cadence/Kconfig
> +++ b/drivers/net/ethernet/cadence/Kconfig
> @@ -4,7 +4,7 @@
> 
> config NET_CADENCE
> 	bool "Cadence devices"
> -	depends on HAS_IOMEM && (ARM || AVR32 || MICROBLAZE || COMPILE_TEST)
> +	depends on HAS_IOMEM && (ARM || ARM64 || AVR32 || MICROBLAZE || COMPILE_TEST)

drop the arch test just put HAS_IOMEM

Best Regards,
J.
> 	default y
> 	---help---
> 	  If you have a network (Ethernet) card belonging to this class, say Y.
> @@ -30,7 +30,7 @@ config ARM_AT91_ETHER
> 
> config MACB
> 	tristate "Cadence MACB/GEM support"
> -	depends on HAS_DMA && (PLATFORM_AT32AP || ARCH_AT91 || ARCH_PICOXCELL || ARCH_ZYNQ || MICROBLAZE || COMPILE_TEST)
> +	depends on HAS_DMA && (PLATFORM_AT32AP || ARCH_AT91 || ARCH_PICOXCELL || ARCH_ZYNQ || ARM64 || MICROBLAZE || COMPILE_TEST)
> 	select PHYLIB
> 	---help---
> 	  The Cadence MACB ethernet interface is found on many Atmel AT32 and
> -- 
> 1.8.2.3
> 
> --
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH] net: cadence: Enable MACB driver for ARM64

[Michal Simek]

On 02/24/2015 01:12 PM, Jean-Christophe PLAGNIOL-VILLARD wrote:
> 
>> On Feb 24, 2015, at 3:45 PM, Michal Simek <michal.simek@xilinx.com> wrote:
>>
>> This driver is used on new Xilinx ZynqMP SoC.
>>
>> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
>> Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
>> ---
>>
>> drivers/net/ethernet/cadence/Kconfig | 4 ++--
>> 1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/net/ethernet/cadence/Kconfig b/drivers/net/ethernet/cadence/Kconfig
>> index 321d2ad235d9..4562f90c0348 100644
>> --- a/drivers/net/ethernet/cadence/Kconfig
>> +++ b/drivers/net/ethernet/cadence/Kconfig
>> @@ -4,7 +4,7 @@
>>
>> config NET_CADENCE
>> 	bool "Cadence devices"
>> -	depends on HAS_IOMEM && (ARM || AVR32 || MICROBLAZE || COMPILE_TEST)
>> +	depends on HAS_IOMEM && (ARM || ARM64 || AVR32 || MICROBLAZE || COMPILE_TEST)
> 
> drop the arch test just put HAS_IOMEM

ok. Let me push it to Fenguang testing system if this will work.

Thanks,
Michal