From: Arvid Brodin <arvid.brodin@alten.se>
To: Arvid Brodin <arvid.brodin@alten.se>,
David Miller <davem@davemloft.net>,
"netdev@vger.kernel.org" <netdev@vger.kernel.org>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Subject: [PATCH v2 net] net/hsr: Fix NULL pointer dereference and refcnt bugs when deleting a HSR interface.
Date: Fri, 27 Feb 2015 21:26:03 +0100 [thread overview]
Message-ID: <54F0D2DB.2020302@alten.se> (raw)
To repeat:
$ sudo ip link del hsr0
BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
IP: [<ffffffff8187f495>] hsr_del_port+0x15/0xa0
etc...
Bug description:
As part of the hsr master device destruction, hsr_del_port() is called for each of
the hsr ports. At each such call, the master device is updated regarding features
and mtu. When the master device is freed before the slave interfaces, master will
be NULL in hsr_del_port(), which led to a NULL pointer dereference.
Additionally, dev_put() was called on the master device itself in hsr_del_port(),
causing a refcnt error.
A third bug in the same code path was that the rtnl lock was not taken before
hsr_del_port() was called as part of hsr_dev_destroy().
The reporter (Nicolas Dichtel) also said: "hsr_netdev_notify() supposes that the
port will always be available when the notification is for an hsr interface. It's
wrong. For example, netdev_wait_allrefs() may resend NETDEV_UNREGISTER.". As a
precaution against this, a check for port == NULL was added in hsr_dev_notify().
Reported-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Fixes: 51f3c605318b056a ("net/hsr: Move slave init to hsr_slave.c.")
Signed-off-by: Arvid Brodin <arvid.brodin@alten.se>
---
net/hsr/hsr_device.c | 3 +++
net/hsr/hsr_main.c | 4 ++++
net/hsr/hsr_slave.c | 10 +++++++---
3 files changed, 14 insertions(+), 3 deletions(-)
diff --git a/net/hsr/hsr_device.c b/net/hsr/hsr_device.c
index a138d75..44d2746 100644
--- a/net/hsr/hsr_device.c
+++ b/net/hsr/hsr_device.c
@@ -359,8 +359,11 @@ static void hsr_dev_destroy(struct net_device *hsr_dev)
struct hsr_port *port;
hsr = netdev_priv(hsr_dev);
+
+ rtnl_lock();
hsr_for_each_port(hsr, port)
hsr_del_port(port);
+ rtnl_unlock();
del_timer_sync(&hsr->prune_timer);
del_timer_sync(&hsr->announce_timer);
diff --git a/net/hsr/hsr_main.c b/net/hsr/hsr_main.c
index 779d28b..cd37d00 100644
--- a/net/hsr/hsr_main.c
+++ b/net/hsr/hsr_main.c
@@ -36,6 +36,10 @@ static int hsr_netdev_notify(struct notifier_block *nb, unsigned long event,
return NOTIFY_DONE; /* Not an HSR device */
hsr = netdev_priv(dev);
port = hsr_port_get_hsr(hsr, HSR_PT_MASTER);
+ if (port == NULL) {
+ /* Resend of notification concerning removed device? */
+ return NOTIFY_DONE;
+ }
} else {
hsr = port->hsr;
}
diff --git a/net/hsr/hsr_slave.c b/net/hsr/hsr_slave.c
index a348dcb..7d37366 100644
--- a/net/hsr/hsr_slave.c
+++ b/net/hsr/hsr_slave.c
@@ -181,8 +181,10 @@ void hsr_del_port(struct hsr_port *port)
list_del_rcu(&port->port_list);
if (port != master) {
- netdev_update_features(master->dev);
- dev_set_mtu(master->dev, hsr_get_max_mtu(hsr));
+ if (master != NULL) {
+ netdev_update_features(master->dev);
+ dev_set_mtu(master->dev, hsr_get_max_mtu(hsr));
+ }
netdev_rx_handler_unregister(port->dev);
dev_set_promiscuity(port->dev, -1);
}
@@ -192,5 +194,7 @@ void hsr_del_port(struct hsr_port *port)
*/
synchronize_rcu();
- dev_put(port->dev);
+
+ if (port != master)
+ dev_put(port->dev);
}
--
2.0.5
Arvid Brodin | Consultant (Linux)
ALTEN | Knarrarnäsgatan 7 | SE-164 40 Kista | Sweden
arvid.brodin@alten.se | www.alten.se/en/
next reply other threads:[~2015-02-27 20:36 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-27 20:26 Arvid Brodin [this message]
2015-03-01 19:00 ` [PATCH v2 net] net/hsr: Fix NULL pointer dereference and refcnt bugs when deleting a HSR interface David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54F0D2DB.2020302@alten.se \
--to=arvid.brodin@alten.se \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
--cc=nicolas.dichtel@6wind.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).