From: Vlad Zolotarov <vladz@cloudius-systems.com>
To: Alexander Duyck <alexander.duyck@gmail.com>, netdev@vger.kernel.org
Cc: jeffrey.t.kirsher@intel.com, avi@cloudius-systems.com,
gleb@cloudius-systems.com
Subject: Re: [PATCH net-next v9 4/7] ixgbevf: Add a RETA query code
Date: Mon, 30 Mar 2015 11:43:28 +0300 [thread overview]
Message-ID: <55190CB0.9030906@cloudius-systems.com> (raw)
In-Reply-To: <551881FE.7000600@gmail.com>
On 03/30/15 01:51, Alexander Duyck wrote:
> On 03/29/2015 09:11 AM, Vlad Zolotarov wrote:
>> We will currently support only 82599 and x540 deviced. Support for other devices
>> will be added later.
>>
>> - Added a new API version support.
>> - Added the query implementation in the ixgbevf.
>>
>> Signed-off-by: Vlad Zolotarov <vladz@cloudius-systems.com>
>> ---
>> New in v9:
>> - Reduce the support to 82599 and x540 devices only.
>> - Improvements in RETA query code:
>> - Implement a "compression" of VF's RETA contents: pass only 2 bits
>> per-entry.
>> - RETA querying is done in a single mailbox operation thanks to compression.
>>
>> New in v8:
>> - Protect mailbox with a spinlock.
>>
>> New in v7:
>> - Add ixgbe_mbox_api_12 case in ixgbevf_set_num_queues().
>> - Properly expand HW RETA into the ethtool buffer.
>>
>> New in v6:
>> - Add a proper return code when an operation is blocked by PF.
>>
>> New in v3:
>> - Adjusted to the new interface IXGBE_VF_GET_RETA command.
>> - Added a proper support for x550 devices.
>>
>> New in v1 (compared to RFC):
>> - Use "if-else" statement instead of a "switch-case" for a single option case
>> (in ixgbevf_get_reta()).
>> ---
>> drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 5 +-
>> drivers/net/ethernet/intel/ixgbevf/mbx.h | 4 ++
>> drivers/net/ethernet/intel/ixgbevf/vf.c | 76 +++++++++++++++++++++++
>> drivers/net/ethernet/intel/ixgbevf/vf.h | 2 +
>> 4 files changed, 86 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
>> index 4ee15ad..a16d267 100644
>> --- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
>> +++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
>> @@ -2030,7 +2030,8 @@ static void ixgbevf_init_last_counter_stats(struct ixgbevf_adapter *adapter)
>> static void ixgbevf_negotiate_api(struct ixgbevf_adapter *adapter)
>> {
>> struct ixgbe_hw *hw = &adapter->hw;
>> - int api[] = { ixgbe_mbox_api_11,
>> + int api[] = { ixgbe_mbox_api_12,
>> + ixgbe_mbox_api_11,
>> ixgbe_mbox_api_10,
>> ixgbe_mbox_api_unknown };
>> int err = 0, idx = 0;
>> @@ -2332,6 +2333,7 @@ static void ixgbevf_set_num_queues(struct ixgbevf_adapter *adapter)
>>
>> switch (hw->api_version) {
>> case ixgbe_mbox_api_11:
>> + case ixgbe_mbox_api_12:
>> adapter->num_rx_queues = rss;
>> adapter->num_tx_queues = rss;
>> default:
>> @@ -3712,6 +3714,7 @@ static int ixgbevf_change_mtu(struct net_device *netdev, int new_mtu)
>>
>> switch (adapter->hw.api_version) {
>> case ixgbe_mbox_api_11:
>> + case ixgbe_mbox_api_12:
>> max_possible_frame = IXGBE_MAX_JUMBO_FRAME_SIZE;
>> break;
>> default:
>> diff --git a/drivers/net/ethernet/intel/ixgbevf/mbx.h b/drivers/net/ethernet/intel/ixgbevf/mbx.h
>> index 6253e93..66e138b 100644
>> --- a/drivers/net/ethernet/intel/ixgbevf/mbx.h
>> +++ b/drivers/net/ethernet/intel/ixgbevf/mbx.h
>> @@ -83,6 +83,7 @@ enum ixgbe_pfvf_api_rev {
>> ixgbe_mbox_api_10, /* API version 1.0, linux/freebsd VF driver */
>> ixgbe_mbox_api_20, /* API version 2.0, solaris Phase1 VF driver */
>> ixgbe_mbox_api_11, /* API version 1.1, linux/freebsd VF driver */
>> + ixgbe_mbox_api_12, /* API version 1.2, linux/freebsd VF driver */
>> /* This value should always be last */
>> ixgbe_mbox_api_unknown, /* indicates that API version is not known */
>> };
>> @@ -107,6 +108,9 @@ enum ixgbe_pfvf_api_rev {
>> #define IXGBE_VF_TRANS_VLAN 3 /* Indication of port VLAN */
>> #define IXGBE_VF_DEF_QUEUE 4 /* Default queue offset */
>>
>> +/* mailbox API, version 1.2 VF requests */
>> +#define IXGBE_VF_GET_RETA 0x0a /* VF request for RETA */
>> +
>> /* length of permanent address message returned from PF */
>> #define IXGBE_VF_PERMADDR_MSG_LEN 4
>> /* word in permanent address message with the current multicast type */
>> diff --git a/drivers/net/ethernet/intel/ixgbevf/vf.c b/drivers/net/ethernet/intel/ixgbevf/vf.c
>> index 2614fd3..2676c0b 100644
>> --- a/drivers/net/ethernet/intel/ixgbevf/vf.c
>> +++ b/drivers/net/ethernet/intel/ixgbevf/vf.c
>> @@ -256,6 +256,81 @@ static s32 ixgbevf_set_uc_addr_vf(struct ixgbe_hw *hw, u32 index, u8 *addr)
>> return ret_val;
>> }
>>
>> +static inline int ixgbevf_get_reta_locked(struct ixgbe_hw *hw, u32 *msgbuf,
>> + u32 *reta)
>> +{
>> + int err, i, j;
>> + u32 *hw_reta = &msgbuf[1];
>> +
>> + /* We have to use a mailbox for 82599 and x540 devices only.
>> + * For these devices RETA has 128 entries.
>> + * Also these VFs support up to 4 RSS queues. Therefore PF will compress
>> + * 16 RETA entries in each DWORD giving 2 bits to each entry.
>> + */
>> + int dwords = 128 / 16;
>> +
>> + msgbuf[0] = IXGBE_VF_GET_RETA;
>> +
>> + err = hw->mbx.ops.write_posted(hw, msgbuf, 1);
>> +
>> + if (err)
>> + return err;
>> +
>> + err = hw->mbx.ops.read_posted(hw, msgbuf, dwords + 1);
>> +
>> + if (err)
>> + return err;
>> +
>> + msgbuf[0] &= ~IXGBE_VT_MSGTYPE_CTS;
>> +
>> + /* If the operation has been refused by a PF return -EPERM */
>> + if (msgbuf[0] == (IXGBE_VF_GET_RETA | IXGBE_VT_MSGTYPE_NACK))
>> + return -EPERM;
>> +
>> + /* If we didn't get an ACK there must have been
>> + * some sort of mailbox error so we should treat it
>> + * as such.
>> + */
>> + if (msgbuf[0] != (IXGBE_VF_GET_RETA | IXGBE_VT_MSGTYPE_ACK))
>> + return IXGBE_ERR_MBX;
>> +
>> + for (i = 0; i < dwords; i++)
>> + for (j = 0; j < 16; j++)
>> + reta[i * 16 + j] = (hw_reta[i] >> (2 * j)) & 0x3;
>> +
>> + return 0;
>> +}
>> +
>> +/**
>> + * ixgbevf_get_reta - get the RSS redirection table (RETA) contents.
>> + * @adapter: pointer to the port handle
>> + * @reta: buffer to fill with RETA contents.
>> + *
>> + * The "reta" buffer should be big enough to contain 32 registers.
>> + *
>> + * Returns: 0 on success.
>> + * if API doesn't support this operation - (-EPERM).
>> + */
>> +int ixgbevf_get_reta(struct ixgbevf_adapter *adapter, u32 *reta)
>> +{
>> + int err;
>> + u32 msgbuf[IXGBE_VFMAILBOX_SIZE];
>> +
>> + /* We support the RSS querying for 82599 and x540 devices only.
>> + * Thus return an error if API doesn't support RETA querying or querying
>> + * is not supported for this device type.
>> + */
>> + if (adapter->hw.api_version != ixgbe_mbox_api_12 ||
>> + adapter->hw.mac.type >= ixgbe_mac_X550_vf)
>> + return -EPERM;
>> +
>> + spin_lock_bh(&adapter->mbx_lock);
>> + err = ixgbevf_get_reta_locked(&adapter->hw, msgbuf, reta);
>> + spin_unlock_bh(&adapter->mbx_lock);
>> +
>> + return err;
>> +}
>> +
> You really shouldn't be pushing the lock down to this level. The caller
> should be one to hold the mailbox lock. Also the functions at this
> level are normally only passed the hardware struct, not the adapter
> struct as most of this code is meant to be usable in other OSes such as
> FreeBSD and the Linux spin_lock calls are not generic across OSes.
I see... Ok. Let me fix that in v10.
>
>> /**
>> * ixgbevf_set_rar_vf - set device MAC address
>> * @hw: pointer to hardware structure
>> @@ -545,6 +620,7 @@ int ixgbevf_get_queues(struct ixgbe_hw *hw, unsigned int *num_tcs,
>> /* do nothing if API doesn't support ixgbevf_get_queues */
>> switch (hw->api_version) {
>> case ixgbe_mbox_api_11:
>> + case ixgbe_mbox_api_12:
>> break;
>> default:
>> return 0;
>> diff --git a/drivers/net/ethernet/intel/ixgbevf/vf.h b/drivers/net/ethernet/intel/ixgbevf/vf.h
>> index 6688250..7944962 100644
>> --- a/drivers/net/ethernet/intel/ixgbevf/vf.h
>> +++ b/drivers/net/ethernet/intel/ixgbevf/vf.h
>> @@ -38,6 +38,7 @@
>> #include "mbx.h"
>>
>> struct ixgbe_hw;
>> +struct ixgbevf_adapter;
>>
>> /* iterator type for walking multicast address lists */
>> typedef u8* (*ixgbe_mc_addr_itr) (struct ixgbe_hw *hw, u8 **mc_addr_ptr,
>> @@ -210,4 +211,5 @@ void ixgbevf_rlpml_set_vf(struct ixgbe_hw *hw, u16 max_size);
>> int ixgbevf_negotiate_api_version(struct ixgbe_hw *hw, int api);
>> int ixgbevf_get_queues(struct ixgbe_hw *hw, unsigned int *num_tcs,
>> unsigned int *default_tc);
>> +int ixgbevf_get_reta(struct ixgbevf_adapter *adapter, u32 *reta);
>> #endif /* __IXGBE_VF_H__ */
>>
next prev parent reply other threads:[~2015-03-30 8:43 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-29 16:11 [PATCH net-next v9 0/7]: ixgbevf: Allow querying VFs RSS indirection table and key Vlad Zolotarov
2015-03-29 16:11 ` [PATCH net-next v9 1/7] if_link: Add an additional parameter to ifla_vf_info for RSS querying Vlad Zolotarov
2015-03-29 16:11 ` [PATCH net-next v9 2/7] ixgbe: Add a new netdev op to allow/prevent a VF from querying an RSS info Vlad Zolotarov
2015-03-29 22:32 ` Alexander Duyck
2015-03-30 8:10 ` Vlad Zolotarov
2015-03-29 16:11 ` [PATCH net-next v9 3/7] ixgbe: Add a RETA query command to VF-PF channel API Vlad Zolotarov
2015-03-29 22:45 ` Alexander Duyck
2015-03-30 8:24 ` Vlad Zolotarov
2015-03-29 16:11 ` [PATCH net-next v9 4/7] ixgbevf: Add a RETA query code Vlad Zolotarov
2015-03-29 22:51 ` Alexander Duyck
2015-03-30 8:43 ` Vlad Zolotarov [this message]
2015-03-30 9:12 ` Vlad Zolotarov
2015-03-30 14:58 ` Alexander Duyck
2015-03-30 15:13 ` Vlad Zolotarov
2015-03-29 16:11 ` [PATCH net-next v9 5/7] ixgbe: Add GET_RSS_KEY command to VF-PF channel commands set Vlad Zolotarov
2015-03-29 22:04 ` Alexander Duyck
2015-03-30 9:57 ` Vlad Zolotarov
2015-03-30 10:08 ` Vlad Zolotarov
2015-03-30 10:41 ` Vlad Zolotarov
2015-03-30 15:04 ` Alexander Duyck
2015-03-29 16:11 ` [PATCH net-next v9 6/7] ixgbevf: Add RSS Key query code Vlad Zolotarov
2015-03-29 22:04 ` Alexander Duyck
2015-03-30 12:38 ` Vlad Zolotarov
2015-03-30 15:07 ` Alexander Duyck
2015-03-30 15:25 ` Vlad Zolotarov
2015-03-30 15:31 ` Vlad Zolotarov
2015-03-30 13:53 ` Vlad Zolotarov
2015-03-30 15:10 ` Alexander Duyck
2015-03-30 15:17 ` Vlad Zolotarov
2015-03-30 16:54 ` Alexander Duyck
2015-03-30 17:18 ` Vlad Zolotarov
2015-03-29 16:11 ` [PATCH net-next v9 7/7] ixgbevf: Add the appropriate ethtool ops to query RSS indirection table and key Vlad Zolotarov
2015-03-29 22:19 ` Alexander Duyck
2015-03-30 14:00 ` Vlad Zolotarov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55190CB0.9030906@cloudius-systems.com \
--to=vladz@cloudius-systems.com \
--cc=alexander.duyck@gmail.com \
--cc=avi@cloudius-systems.com \
--cc=gleb@cloudius-systems.com \
--cc=jeffrey.t.kirsher@intel.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).