From: Nicolas Ferre <nicolas.ferre@atmel.com>
To: Nathan Sullivan <nathan.sullivan@ni.com>
Cc: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2 2/3] net: macb: Disable half duplex gigabit on Zynq
Date: Fri, 22 May 2015 16:56:28 +0200 [thread overview]
Message-ID: <555F439C.1020703@atmel.com> (raw)
In-Reply-To: <1432304531-23682-2-git-send-email-nathan.sullivan@ni.com>
Le 22/05/2015 16:22, Nathan Sullivan a écrit :
> According to the Zynq TRM, gigabit half duplex is not supported. Add a
> new cap and compatible string so Zynq can avoid advertising that mode.
>
> Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
> ---
> drivers/net/ethernet/cadence/macb.c | 12 ++++++++++++
> drivers/net/ethernet/cadence/macb.h | 1 +
> 2 files changed, 13 insertions(+)
>
> diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c
> index 61aa570..e7c0ef6 100644
> --- a/drivers/net/ethernet/cadence/macb.c
> +++ b/drivers/net/ethernet/cadence/macb.c
> @@ -350,6 +350,9 @@ static int macb_mii_probe(struct net_device *dev)
> else
> phydev->supported &= PHY_BASIC_FEATURES;
>
> + if (bp->caps & MACB_CAPS_NO_GIGABIT_HALF)
> + phydev->supported &= ~SUPPORTED_1000baseT_Half;
> +
> phydev->advertising = phydev->supported;
>
> bp->link = 0;
> @@ -2693,6 +2696,14 @@ static const struct macb_config emac_config = {
> .init = at91ether_init,
> };
>
> +static const struct macb_config zynq_config = {
> + .caps = MACB_CAPS_SG_DISABLED | MACB_CAPS_GIGABIT_MODE_AVAILABLE |
> + MACB_CAPS_NO_GIGABIT_HALF,
> + .dma_burst_length = 16,
> + .clk_init = macb_clk_init,
> + .init = macb_init,
> +};
> +
> static const struct of_device_id macb_dt_ids[] = {
> { .compatible = "cdns,at32ap7000-macb" },
> { .compatible = "cdns,at91sam9260-macb", .data = &at91sam9260_config },
> @@ -2703,6 +2714,7 @@ static const struct of_device_id macb_dt_ids[] = {
> { .compatible = "atmel,sama5d4-gem", .data = &sama5d4_config },
> { .compatible = "cdns,at91rm9200-emac", .data = &emac_config },
> { .compatible = "cdns,emac", .data = &emac_config },
> + { .compatible = "cdns,zynq-gem", .data = &zynq_config },
> { /* sentinel */ }
> };
> MODULE_DEVICE_TABLE(of, macb_dt_ids);
> diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h
> index eb7d76f..24b1d9b 100644
> --- a/drivers/net/ethernet/cadence/macb.h
> +++ b/drivers/net/ethernet/cadence/macb.h
> @@ -393,6 +393,7 @@
> #define MACB_CAPS_ISR_CLEAR_ON_WRITE 0x00000001
> #define MACB_CAPS_USRIO_HAS_CLKEN 0x00000002
> #define MACB_CAPS_USRIO_DEFAULT_IS_MII 0x00000004
> +#define MACB_CAPS_NO_GIGABIT_HALF 0x00000008
> #define MACB_CAPS_FIFO_MODE 0x10000000
> #define MACB_CAPS_GIGABIT_MODE_AVAILABLE 0x20000000
> #define MACB_CAPS_SG_DISABLED 0x40000000
>
--
Nicolas Ferre
next prev parent reply other threads:[~2015-05-22 14:56 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-22 14:22 [PATCH v2 1/3] net: macb: Document zynq gem dt binding Nathan Sullivan
2015-05-22 14:22 ` [PATCH v2 2/3] net: macb: Disable half duplex gigabit on Zynq Nathan Sullivan
2015-05-22 14:56 ` Nicolas Ferre [this message]
2015-05-22 18:58 ` David Miller
2015-05-22 14:22 ` [PATCH v2 3/3] ARM: zynq: DT: Use the zynq binding with macb Nathan Sullivan
2015-05-25 19:14 ` Sören Brinkmann
2015-05-22 14:56 ` [PATCH v2 1/3] net: macb: Document zynq gem dt binding Nicolas Ferre
2015-05-22 18:58 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=555F439C.1020703@atmel.com \
--to=nicolas.ferre@atmel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=nathan.sullivan@ni.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).