netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Florian Fainelli <f.fainelli@gmail.com>
To: Stas Sergeev <stsp@list.ru>, linux-net@vger.kernel.org
Cc: Linux kernel <linux-kernel@vger.kernel.org>,
	Sebastien Rannou <mxs@sbrk.org>,
	Arnaud Ebalard <arno@natisbad.org>,
	Stas Sergeev <stsp@users.sourceforge.net>,
	Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
	netdev <netdev@vger.kernel.org>,
	stable@vger.kernel.org
Subject: Re: [PATCH 2/2] mvneta: use inband status only when link type is "auto"
Date: Thu, 09 Jul 2015 11:18:38 -0700	[thread overview]
Message-ID: <559EBAFE.6040705@gmail.com> (raw)
In-Reply-To: <559EB22E.7070607@list.ru>

On 09/07/15 10:41, Stas Sergeev wrote:
> 
> The commit 898b2970e2c9 ("mvneta: implement SGMII-based in-band link state
> signaling") implemented the link parameters auto-negotiation unconditionally.
> Unfortunately it appears that some HW that implements SGMII protocol,
> doesn't generate the inband status, so it is not possible to auto-negotiate
> anything with such HW.

What is the purpose of using the in-band status in the first place if
you end-up having to specify a 'fixed-link' property which contains most
of the link parameters: speed, duplex etc...?

> 
> This patch enables the auto-negotiation only if the 'link' DT property
> is set to "auto".
> For old configurations where the 'link' property is not specified, the
> default is to not use auto-negotiation.
> 
> This patch fixes the following regression:
> https://lkml.org/lkml/2015/7/8/865
> and is therefore CCed to stable.
> 
> Signed-off-by: Stas Sergeev <stsp@users.sourceforge.net>
> 
> CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
> CC: netdev@vger.kernel.org
> CC: linux-kernel@vger.kernel.org
> CC: stable@vger.kernel.org
> ---
>  drivers/net/ethernet/marvell/mvneta.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
> index 74176ec..b7f4d7f 100644
> --- a/drivers/net/ethernet/marvell/mvneta.c
> +++ b/drivers/net/ethernet/marvell/mvneta.c
> @@ -3009,7 +3009,7 @@ static int mvneta_probe(struct platform_device *pdev)
>  	char hw_mac_addr[ETH_ALEN];
>  	const char *mac_from;
>  	int phy_mode;
> -	int fixed_phy = 0;
> +	int autoneg_link = 0;
>  	int err;
> 
>  	/* Our multiqueue support is not complete, so for now, only
> @@ -3043,7 +3043,7 @@ static int mvneta_probe(struct platform_device *pdev)
>  			dev_err(&pdev->dev, "cannot register fixed PHY\n");
>  			goto err_free_irq;
>  		}
> -		fixed_phy = 1;
> +		autoneg_link = of_phy_is_autoneg_link(dn);
> 
>  		/* In the case of a fixed PHY, the DT node associated
>  		 * to the PHY is the Ethernet MAC DT node.
> @@ -3068,7 +3068,7 @@ static int mvneta_probe(struct platform_device *pdev)
>  	pp->phy_node = phy_node;
>  	pp->phy_interface = phy_mode;
>  	pp->use_inband_status = (phy_mode == PHY_INTERFACE_MODE_SGMII) &&
> -				fixed_phy;
> +				autoneg_link;
> 
>  	pp->clk = devm_clk_get(&pdev->dev, NULL);
>  	if (IS_ERR(pp->clk)) {
> 


-- 
Florian

  reply	other threads:[~2015-07-09 18:18 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <559EB0A4.5080101@list.ru>
2015-07-09 17:38 ` [PATCH 1/2] of_mdio: add new DT property 'link' for fixed-link Stas Sergeev
2015-07-09 18:24   ` Florian Fainelli
2015-07-09 20:43     ` Stas Sergeev
2015-07-09 21:15       ` Florian Fainelli
2015-07-09 21:43         ` Stas Sergeev
2015-07-10  8:46           ` Sebastien Rannou
     [not found]             ` <alpine.LNX.2.02.1507100940530.15010-i6rsG8ix9II@public.gmane.org>
2015-07-10 11:20               ` Stas Sergeev
2015-07-10 18:22                 ` Florian Fainelli
2015-07-09 17:41 ` [PATCH 2/2] mvneta: use inband status only when link type is "auto" Stas Sergeev
2015-07-09 18:18   ` Florian Fainelli [this message]
2015-07-09 20:26     ` Stas Sergeev
2015-07-09 21:14       ` Florian Fainelli
2015-07-09 21:31         ` Stas Sergeev

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=559EBAFE.6040705@gmail.com \
    --to=f.fainelli@gmail.com \
    --cc=arno@natisbad.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-net@vger.kernel.org \
    --cc=mxs@sbrk.org \
    --cc=netdev@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=stsp@list.ru \
    --cc=stsp@users.sourceforge.net \
    --cc=thomas.petazzoni@free-electrons.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).