From: Stas Sergeev <stsp@list.ru>
To: netdev <netdev@vger.kernel.org>
Cc: Linux kernel <linux-kernel@vger.kernel.org>,
Sebastien Rannou <mxs@sbrk.org>,
Arnaud Ebalard <arno@natisbad.org>,
Stas Sergeev <stsp@users.sourceforge.net>,
Florian Fainelli <f.fainelli@gmail.com>,
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
stable@vger.kernel.org
Subject: [PATCH 3/3] mvneta: use inband status only when explicitly enabled
Date: Tue, 14 Jul 2015 20:14:55 +0300 [thread overview]
Message-ID: <55A5438F.8070903@list.ru> (raw)
In-Reply-To: <55A5424D.4030809@list.ru>
The commit 898b2970e2c9 ("mvneta: implement SGMII-based in-band link state
signaling") implemented the link parameters auto-negotiation unconditionally.
Unfortunately it appears that some HW that implements SGMII protocol,
doesn't generate the inband status, so it is not possible to auto-negotiate
anything with such HW.
This patch enables the auto-negotiation only if explicitly requested with
the 'managed' DT property.
This patch fixes the following regression:
https://lkml.org/lkml/2015/7/8/865
and is therefore CCed to stable.
Signed-off-by: Stas Sergeev <stsp@users.sourceforge.net>
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CC: netdev@vger.kernel.org
CC: linux-kernel@vger.kernel.org
CC: stable@vger.kernel.org
---
drivers/net/ethernet/marvell/mvneta.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 74176ec..7a1deee 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -3008,8 +3008,8 @@ static int mvneta_probe(struct platform_device *pdev)
const char *dt_mac_addr;
char hw_mac_addr[ETH_ALEN];
const char *mac_from;
+ const char *managed;
int phy_mode;
- int fixed_phy = 0;
int err;
/* Our multiqueue support is not complete, so for now, only
@@ -3043,7 +3043,6 @@ static int mvneta_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "cannot register fixed PHY\n");
goto err_free_irq;
}
- fixed_phy = 1;
/* In the case of a fixed PHY, the DT node associated
* to the PHY is the Ethernet MAC DT node.
@@ -3067,8 +3066,10 @@ static int mvneta_probe(struct platform_device *pdev)
pp = netdev_priv(dev);
pp->phy_node = phy_node;
pp->phy_interface = phy_mode;
- pp->use_inband_status = (phy_mode == PHY_INTERFACE_MODE_SGMII) &&
- fixed_phy;
+
+ err = of_property_read_string(dn, "managed", &managed);
+ pp->use_inband_status = (err == 0 &&
+ strcmp(managed, "in-band-status") == 0);
pp->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(pp->clk)) {
--
1.9.1
next prev parent reply other threads:[~2015-07-14 17:14 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-14 17:09 [PATCH v3 0/3] net: enable inband link state negotiation only when explicitly requested Stas Sergeev
2015-07-14 17:11 ` [PATCH 1/3] fixed_phy: handle link-down case Stas Sergeev
2015-07-14 18:28 ` Florian Fainelli
2015-07-14 17:13 ` [PATCH 2/3] of_mdio: add new DT property 'managed' to specify the PHY management type Stas Sergeev
[not found] ` <55A5432C.1080609-cmBhpYW9OiY@public.gmane.org>
2015-07-14 17:51 ` Florian Fainelli
2015-07-14 20:26 ` Stas Sergeev
2015-07-14 17:14 ` Stas Sergeev [this message]
-- strict thread matches above, loose matches on Subject: below --
2015-07-16 14:49 [PATCH v4 0/3] net: enable inband link state negotiation only when explicitly requested Stas Sergeev
2015-07-16 14:53 ` [PATCH 3/3] mvneta: use inband status only when explicitly enabled Stas Sergeev
2015-07-10 16:38 [PATCH v2 0/2] net: enable inband link state negotiation only when explicitly requested Stas Sergeev
2015-07-10 16:45 ` [PATCH 3/3] mvneta: use inband status only when explicitly enabled Stas Sergeev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55A5438F.8070903@list.ru \
--to=stsp@list.ru \
--cc=arno@natisbad.org \
--cc=f.fainelli@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mxs@sbrk.org \
--cc=netdev@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=stsp@users.sourceforge.net \
--cc=thomas.petazzoni@free-electrons.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).