[PATCH] can: flexcan: demote register output to debug level

[PATCH] can: flexcan: demote register output to debug level

[Lucas Stach]

This message isn't really helpful for the general reader of the kernel
logs, so should not be printed with info level. All other register
programming outputs in the flexcan driver already use the debug level.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
 drivers/net/can/flexcan.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index ad0a7e8c2c2b..95abd395cb0d 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -797,7 +797,7 @@ static void flexcan_set_bittiming(struct net_device *dev)
 	if (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES)
 		reg |= FLEXCAN_CTRL_SMP;
 
-	netdev_info(dev, "writing ctrl=0x%08x\n", reg);
+	netdev_dbg(dev, "writing ctrl=0x%08x\n", reg);
 	flexcan_write(reg, &regs->ctrl);
 
 	/* print chip status */
-- 
2.4.6

Re: [PATCH] can: flexcan: demote register output to debug level

[Marc Kleine-Budde]

[-- Attachment #1: Type: text/plain, Size: 637 bytes --]

On 08/07/2015 05:16 PM, Lucas Stach wrote:
> This message isn't really helpful for the general reader of the kernel
> logs, so should not be printed with info level. All other register
> programming outputs in the flexcan driver already use the debug level.
> 
> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

Added to can-next.

Thanks,
Marc

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 455 bytes --]