[PATCH v1 0/6] Add fec1 and fec2 support for i.MX7d sdb board

[PATCH v1 0/6] Add fec1 and fec2 support for i.MX7d sdb board

[Fugang Duan]

The patch series is to add fec support for i.MX7d sdb board. Since i.MX7d fec ip is
the same as i.MX6SX, so there have no change for driver itself.

Patch#1: add bcm54220 PHY ID entry into brcmphy.h file.
Patch#2: add new iomux-gpr file to define iomux-gpr register and field for i.MX7d.
Patch#3: i.MX7d sdb board install bcm54220 phy, i.MX7d arm2 board install AR8031 phy.
	 For the two phys, there needs extra phy setting, so package the setting to fixup.
Patch#4~6: Add fec dts node and pinmux setting in dts file.


Fugang Duan (6):
  net: phy: broadcom: add bcm54220 phy ID
  ARM: imx7d: add imx7d iomux-gpr field define
  ARM: imx: add enet init for i.MX7D platform
  ARM: dts: imx: pinfunc: add GPIO1 pin define for i.MX7d
  ARM: dts: imx7d: add fec1 and fec2 support for i.MX7d soc
  ARM: dts: imx7d-sdb: add fec1 and fec2 support

 arch/arm/boot/dts/imx7d-pinfunc.h          | 115 +++++++++++++++++++++++++++++
 arch/arm/boot/dts/imx7d-sdb.dts            |  76 ++++++++++++++++++-
 arch/arm/boot/dts/imx7d.dtsi               |  36 +++++++++
 arch/arm/mach-imx/mach-imx7d.c             |  75 ++++++++++++++++++-
 include/linux/brcmphy.h                    |   1 +
 include/linux/mfd/syscon/imx7-iomuxc-gpr.h |  49 ++++++++++++
 6 files changed, 349 insertions(+), 3 deletions(-)
 create mode 100644 include/linux/mfd/syscon/imx7-iomuxc-gpr.h

-- 
1.9.1

[PATCH v1 1/6] net: phy: broadcom: add bcm54220 phy ID

[Fugang Duan]

Add bcm54220 phy ID entry.

Signed-off-by: Fugang Duan <B38611@freescale.com>
---
 include/linux/brcmphy.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h
index 697ca77..20bed15 100644
--- a/include/linux/brcmphy.h
+++ b/include/linux/brcmphy.h
@@ -16,6 +16,7 @@
 #define PHY_ID_BCM5482			0x0143bcb0
 #define PHY_ID_BCM5411			0x00206070
 #define PHY_ID_BCM5421			0x002060e0
+#define PHY_ID_BCM54220			0x600d8589
 #define PHY_ID_BCM5464			0x002060b0
 #define PHY_ID_BCM5461			0x002060c0
 #define PHY_ID_BCM54616S		0x03625d10
-- 
1.9.1

[PATCH v1 2/6] ARM: imx7d: add imx7d iomux-gpr field define

[Fugang Duan]

Add imx7d iomux-gpr field define.

Signed-off-by: Fugang Duan <B38611@freescale.com>
---
 include/linux/mfd/syscon/imx7-iomuxc-gpr.h | 49 ++++++++++++++++++++++++++++++
 1 file changed, 49 insertions(+)

diff --git a/include/linux/mfd/syscon/imx7-iomuxc-gpr.h b/include/linux/mfd/syscon/imx7-iomuxc-gpr.h
new file mode 100644
index 0000000..5cc0553
--- /dev/null
+++ b/include/linux/mfd/syscon/imx7-iomuxc-gpr.h
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_IMX7_IOMUXC_GPR_H
+#define __LINUX_IMX7_IOMUXC_GPR_H
+
+#include <linux/bitops.h>
+
+#define IOMUXC_GPR0	0x00
+#define IOMUXC_GPR1	0x04
+#define IOMUXC_GPR2	0x08
+#define IOMUXC_GPR3	0x0c
+#define IOMUXC_GPR4	0x10
+#define IOMUXC_GPR5	0x14
+#define IOMUXC_GPR6	0x18
+#define IOMUXC_GPR7	0x1c
+#define IOMUXC_GPR8	0x20
+#define IOMUXC_GPR9	0x24
+#define IOMUXC_GPR10	0x28
+#define IOMUXC_GPR11	0x2c
+#define IOMUXC_GPR12	0x30
+#define IOMUXC_GPR13	0x34
+#define IOMUXC_GPR14	0x38
+#define IOMUXC_GPR15	0x3c
+#define IOMUXC_GPR16	0x40
+#define IOMUXC_GPR17	0x44
+#define IOMUXC_GPR18	0x48
+#define IOMUXC_GPR19	0x4c
+#define IOMUXC_GPR20	0x50
+#define IOMUXC_GPR21	0x54
+#define IOMUXC_GPR22	0x58
+
+/* For imx7d iomux gpr register field define */
+#define IMX7D_GPR1_IRQ_MASK			(0x1 << 12)
+#define IMX7D_GPR1_ENET1_TX_CLK_SEL_MASK	(0x1 << 13)
+#define IMX7D_GPR1_ENET2_TX_CLK_SEL_MASK	(0x1 << 14)
+#define IMX7D_GPR1_ENET_TX_CLK_SEL_MASK		(0x3 << 13)
+#define IMX7D_GPR1_ENET1_CLK_DIR_MASK		(0x1 << 17)
+#define IMX7D_GPR1_ENET2_CLK_DIR_MASK		(0x1 << 18)
+#define IMX7D_GPR1_ENET_CLK_DIR_MASK		(0x3 << 17)
+
+#define IMX7D_GPR5_CSI_MUX_CONTROL_MIPI		(0x1 << 4)
+
+#endif /* __LINUX_IMX7_IOMUXC_GPR_H */
-- 
1.9.1

[PATCH v1 3/6] ARM: imx: add enet init for i.MX7D platform

[Fugang Duan]

Add enet phy fixup, clock source init for i.MX7D platform.

Signed-off-by: Fugang Duan <B38611@freescale.com>
---
 arch/arm/mach-imx/mach-imx7d.c | 75 ++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 73 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-imx/mach-imx7d.c b/arch/arm/mach-imx/mach-imx7d.c
index 4d4a190..67d7939 100644
--- a/arch/arm/mach-imx/mach-imx7d.c
+++ b/arch/arm/mach-imx/mach-imx7d.c
@@ -5,13 +5,83 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <linux/irqchip.h>
-#include <linux/of_platform.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
+#include <linux/brcmphy.h>
+#include <linux/irqchip.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/imx7-iomuxc-gpr.h>
+#include <linux/of_platform.h>
+#include <linux/regmap.h>
 
 #include "common.h"
 
+static int ar8031_phy_fixup(struct phy_device *dev)
+{
+	u16 val;
+
+	/* Set RGMII IO voltage to 1.8V */
+	phy_write(dev, 0x1d, 0x1f);
+	phy_write(dev, 0x1e, 0x8);
+
+	/* disable phy AR8031 SmartEEE function. */
+	phy_write(dev, 0xd, 0x3);
+	phy_write(dev, 0xe, 0x805d);
+	phy_write(dev, 0xd, 0x4003);
+	val = phy_read(dev, 0xe);
+	val &= ~(0x1 << 8);
+	phy_write(dev, 0xe, val);
+
+	/* introduce tx clock delay */
+	phy_write(dev, 0x1d, 0x5);
+	val = phy_read(dev, 0x1e);
+	val |= 0x0100;
+	phy_write(dev, 0x1e, val);
+
+	return 0;
+}
+
+static int bcm54220_phy_fixup(struct phy_device *dev)
+{
+	/* enable RXC skew select RGMII copper mode */
+	phy_write(dev, 0x1e, 0x21);
+	phy_write(dev, 0x1f, 0x7ea8);
+	phy_write(dev, 0x1e, 0x2f);
+	phy_write(dev, 0x1f, 0x71b7);
+
+	return 0;
+}
+
+#define PHY_ID_AR8031   0x004dd074
+static void __init imx7d_enet_phy_init(void)
+{
+	if (IS_BUILTIN(CONFIG_PHYLIB)) {
+		phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffff,
+					   ar8031_phy_fixup);
+		phy_register_fixup_for_uid(PHY_ID_BCM54220, 0xffffffff,
+					   bcm54220_phy_fixup);
+	}
+}
+
+static void __init imx7d_enet_clk_sel(void)
+{
+	struct regmap *gpr;
+
+	gpr = syscon_regmap_lookup_by_compatible("fsl,imx7d-iomuxc-gpr");
+	if (!IS_ERR(gpr)) {
+		regmap_update_bits(gpr, IOMUXC_GPR1, IMX7D_GPR1_ENET_TX_CLK_SEL_MASK, 0);
+		regmap_update_bits(gpr, IOMUXC_GPR1, IMX7D_GPR1_ENET_CLK_DIR_MASK, 0);
+	} else {
+		pr_err("failed to find fsl,imx7d-iomux-gpr regmap\n");
+	}
+}
+
+static inline void imx7d_enet_init(void)
+{
+	imx7d_enet_phy_init();
+	imx7d_enet_clk_sel();
+}
+
 static void __init imx7d_init_machine(void)
 {
 	struct device *parent;
@@ -22,6 +92,7 @@ static void __init imx7d_init_machine(void)
 
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 	imx_anatop_init();
+	imx7d_enet_init();
 }
 
 static void __init imx7d_init_irq(void)
-- 
1.9.1

[PATCH v1 4/6] ARM: dts: imx: pinfunc: add GPIO1 pin define for i.MX7d

[Fugang Duan]

Add GPIO1 pin define for i.MX7d.

Signed-off-by: Fugang Duan <B38611@freescale.com>
---
 arch/arm/boot/dts/imx7d-pinfunc.h | 115 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 115 insertions(+)

diff --git a/arch/arm/boot/dts/imx7d-pinfunc.h b/arch/arm/boot/dts/imx7d-pinfunc.h
index a8d8149..8b3cf2bc 100644
--- a/arch/arm/boot/dts/imx7d-pinfunc.h
+++ b/arch/arm/boot/dts/imx7d-pinfunc.h
@@ -15,6 +15,121 @@
  * <mux_reg conf_reg input_reg mux_mode input_val>
  */
 
+#define MX7D_PAD_GPIO1_IO00__GPIO1_IO0				  0x0000 0x0030 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO00__PWM4_OUT				  0x0000 0x0030 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_ANY			  0x0000 0x0030 0x0000 0x2 0x0
+#define MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B			  0x0000 0x0030 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO00__WDOD1_WDOG__RST_B_DEB		  0x0000 0x0030 0x0000 0x4 0x0
+#define MX7D_PAD_GPIO1_IO01__GPIO1_IO1				  0x0004 0x0034 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO01__PWM1_OUT				  0x0004 0x0034 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO01__CCM_ENET_REF_CLK3			  0x0004 0x0034 0x0000 0x2 0x0
+#define MX7D_PAD_GPIO1_IO01__SAI1_MCLK				  0x0004 0x0034 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO01__OBSERVE0_OUT			  0x0004 0x0034 0x0000 0x6 0x0
+#define MX7D_PAD_GPIO1_IO02__GPIO1_IO2				  0x0008 0x0038 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO02__PWM2_OUT				  0x0008 0x0038 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO02__CCM_ENET_REF_CLK1			  0x0008 0x0038 0x0564 0x2 0x3
+#define MX7D_PAD_GPIO1_IO02__SAI2_MCLK				  0x0008 0x0038 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO02__CCM_CLKO1				  0x0008 0x0038 0x0000 0x5 0x0
+#define MX7D_PAD_GPIO1_IO02__OBSERVE1_OUT			  0x0008 0x0038 0x0000 0x6 0x0
+#define MX7D_PAD_GPIO1_IO02__USB_OTG1_ID			  0x0008 0x0038 0x0734 0x7 0x3
+#define MX7D_PAD_GPIO1_IO03__GPIO1_IO3				  0x000C 0x003C 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO03__PWM3_OUT				  0x000C 0x003C 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO03__CCM_ENET_REF_CLK2			  0x000C 0x003C 0x0570 0x2 0x3
+#define MX7D_PAD_GPIO1_IO03__SAI3_MCLK				  0x000C 0x003C 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO03__CCM_CLKO2				  0x000C 0x003C 0x0000 0x5 0x0
+#define MX7D_PAD_GPIO1_IO03__OBSERVE2_OUT			  0x000C 0x003C 0x0000 0x6 0x0
+#define MX7D_PAD_GPIO1_IO03__USB_OTG2_ID			  0x000C 0x003C 0x0730 0x7 0x3
+#define MX7D_PAD_GPIO1_IO04__GPIO1_IO4				  0x0010 0x0040 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO04__USB_OTG1_OC			  0x0010 0x0040 0x072C 0x1 0x1
+#define MX7D_PAD_GPIO1_IO04__FLEXTIMER1_CH4			  0x0010 0x0040 0x0594 0x2 0x1
+#define MX7D_PAD_GPIO1_IO04__UART5_CTS_B			  0x0010 0x0040 0x0710 0x3 0x4
+#define MX7D_PAD_GPIO1_IO04__I2C1_SCL				  0x0010 0x0040 0x05D4 0x4 0x2
+#define MX7D_PAD_GPIO1_IO04__OBSERVE3_OUT			  0x0010 0x0040 0x0000 0x6 0x0
+#define MX7D_PAD_GPIO1_IO05__GPIO1_IO5				  0x0014 0x0044 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO05__USB_OTG1_PWR			  0x0014 0x0044 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO05__FLEXTIMER1_CH5			  0x0014 0x0044 0x0598 0x2 0x1
+#define MX7D_PAD_GPIO1_IO05__UART5_RTS_B			  0x0014 0x0044 0x0710 0x3 0x5
+#define MX7D_PAD_GPIO1_IO05__I2C1_SDA				  0x0014 0x0044 0x05D8 0x4 0x2
+#define MX7D_PAD_GPIO1_IO05__OBSERVE4_OUT			  0x0014 0x0044 0x0000 0x6 0x0
+#define MX7D_PAD_GPIO1_IO06__GPIO1_IO6				  0x0018 0x0048 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO06__USB_OTG2_OC			  0x0018 0x0048 0x0728 0x1 0x1
+#define MX7D_PAD_GPIO1_IO06__FLEXTIMER1_CH6			  0x0018 0x0048 0x059C 0x2 0x1
+#define MX7D_PAD_GPIO1_IO06__UART5_RX_DATA			  0x0018 0x0048 0x0714 0x3 0x4
+#define MX7D_PAD_GPIO1_IO06__I2C2_SCL				  0x0018 0x0048 0x05DC 0x4 0x2
+#define MX7D_PAD_GPIO1_IO06__CCM_WAIT				  0x0018 0x0048 0x0000 0x5 0x0
+#define MX7D_PAD_GPIO1_IO06__KPP_ROW4				  0x0018 0x0048 0x0624 0x6 0x1
+#define MX7D_PAD_GPIO1_IO07__GPIO1_IO7				  0x001C 0x004C 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO07__USB_OTG2_PWR			  0x001C 0x004C 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO07__FLEXTIMER1_CH7			  0x001C 0x004C 0x05A0 0x2 0x1
+#define MX7D_PAD_GPIO1_IO07__UART5_TX_DATA			  0x001C 0x004C 0x0714 0x3 0x5
+#define MX7D_PAD_GPIO1_IO07__I2C2_SDA				  0x001C 0x004C 0x05E0 0x4 0x2
+#define MX7D_PAD_GPIO1_IO07__CCM_STOP				  0x001C 0x004C 0x0000 0x5 0x0
+#define MX7D_PAD_GPIO1_IO07__KPP_COL4				  0x001C 0x004C 0x0604 0x6 0x1
+#define MX7D_PAD_GPIO1_IO08__GPIO1_IO8                            0x0014 0x026C 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO08__SD1_VSELECT                          0x0014 0x026C 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO08__WDOG1_WDOG_B                         0x0014 0x026C 0x0000 0x2 0x0
+#define MX7D_PAD_GPIO1_IO08__UART3_DCE_RX                         0x0014 0x026C 0x0704 0x3 0x0
+#define MX7D_PAD_GPIO1_IO08__UART3_DTE_TX                         0x0014 0x026C 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO08__I2C3_SCL                             0x0014 0x026C 0x05E4 0x4 0x0
+#define MX7D_PAD_GPIO1_IO08__KPP_COL5                             0x0014 0x026C 0x0608 0x6 0x0
+#define MX7D_PAD_GPIO1_IO08__PWM1_OUT                             0x0014 0x026C 0x0000 0x7 0x0
+#define MX7D_PAD_GPIO1_IO09__GPIO1_IO9                            0x0018 0x0270 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO09__SD1_LCTL                             0x0018 0x0270 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO09__CCM_ENET_REF_CLK3                    0x0018 0x0270 0x0000 0x2 0x0
+#define MX7D_PAD_GPIO1_IO09__UART3_DCE_TX                         0x0018 0x0270 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO09__UART3_DTE_RX                         0x0018 0x0270 0x0704 0x3 0x1
+#define MX7D_PAD_GPIO1_IO09__I2C3_SDA                             0x0018 0x0270 0x05E8 0x4 0x0
+#define MX7D_PAD_GPIO1_IO09__CCM_PMIC_READY                       0x0018 0x0270 0x04F4 0x5 0x0
+#define MX7D_PAD_GPIO1_IO09__KPP_ROW5                             0x0018 0x0270 0x0628 0x6 0x0
+#define MX7D_PAD_GPIO1_IO09__PWM2_OUT                             0x0018 0x0270 0x0000 0x7 0x0
+#define MX7D_PAD_GPIO1_IO10__GPIO1_IO10                           0x001C 0x0274 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO10__SD2_LCTL                             0x001C 0x0274 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO10__ENET1_MDIO                           0x001C 0x0274 0x0568 0x2 0x0
+#define MX7D_PAD_GPIO1_IO10__UART3_DCE_RTS                        0x001C 0x0274 0x0700 0x3 0x0
+#define MX7D_PAD_GPIO1_IO10__UART3_DTE_CTS                        0x001C 0x0274 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO10__I2C4_SCL                             0x001C 0x0274 0x05EC 0x4 0x0
+#define MX7D_PAD_GPIO1_IO10__FLEXTIMER1_PHA                       0x001C 0x0274 0x05A4 0x5 0x0
+#define MX7D_PAD_GPIO1_IO10__KPP_COL6                             0x001C 0x0274 0x060C 0x6 0x0
+#define MX7D_PAD_GPIO1_IO10__PWM3_OUT                             0x001C 0x0274 0x0000 0x7 0x0
+#define MX7D_PAD_GPIO1_IO11__GPIO1_IO11                           0x0020 0x0278 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO11__SD3_LCTL                             0x0020 0x0278 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO11__ENET1_MDC                            0x0020 0x0278 0x0000 0x2 0x0
+#define MX7D_PAD_GPIO1_IO11__UART3_DCE_CTS                        0x0020 0x0278 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO11__UART3_DTE_RTS                        0x0020 0x0278 0x0700 0x3 0x1
+#define MX7D_PAD_GPIO1_IO11__I2C4_SDA                             0x0020 0x0278 0x05F0 0x4 0x0
+#define MX7D_PAD_GPIO1_IO11__FLEXTIMER1_PHB                       0x0020 0x0278 0x05A8 0x5 0x0
+#define MX7D_PAD_GPIO1_IO11__KPP_ROW6                             0x0020 0x0278 0x062C 0x6 0x0
+#define MX7D_PAD_GPIO1_IO11__PWM4_OUT                             0x0020 0x0278 0x0000 0x7 0x0
+#define MX7D_PAD_GPIO1_IO12__GPIO1_IO12                           0x0024 0x027C 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO12__SD2_VSELECT                          0x0024 0x027C 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1                    0x0024 0x027C 0x0564 0x2 0x0
+#define MX7D_PAD_GPIO1_IO12__FLEXCAN1_RX                          0x0024 0x027C 0x04DC 0x3 0x0
+#define MX7D_PAD_GPIO1_IO12__CM4_NMI                              0x0024 0x027C 0x0000 0x4 0x0
+#define MX7D_PAD_GPIO1_IO12__CCM_EXT_CLK1                         0x0024 0x027C 0x04E4 0x5 0x0
+#define MX7D_PAD_GPIO1_IO12__SNVS_VIO_5                           0x0024 0x027C 0x0000 0x6 0x0
+#define MX7D_PAD_GPIO1_IO12__USB_OTG1_ID                          0x0024 0x027C 0x0734 0x7 0x0
+#define MX7D_PAD_GPIO1_IO13__GPIO1_IO13                           0x0028 0x0280 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO13__SD3_VSELECT                          0x0028 0x0280 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO13__CCM_ENET_REF_CLK2                    0x0028 0x0280 0x0570 0x2 0x0
+#define MX7D_PAD_GPIO1_IO13__FLEXCAN1_TX                          0x0028 0x0280 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO13__CCM_PMIC_READY                       0x0028 0x0280 0x04F4 0x4 0x1
+#define MX7D_PAD_GPIO1_IO13__CCM_EXT_CLK2                         0x0028 0x0280 0x04E8 0x5 0x0
+#define MX7D_PAD_GPIO1_IO13__SNVS_VIO_5_CTL                       0x0028 0x0280 0x0000 0x6 0x0
+#define MX7D_PAD_GPIO1_IO13__USB_OTG2_ID                          0x0028 0x0280 0x0730 0x7 0x0
+#define MX7D_PAD_GPIO1_IO14__GPIO1_IO14                           0x002C 0x0284 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO14__SD3_CD_B                             0x002C 0x0284 0x0738 0x1 0x0
+#define MX7D_PAD_GPIO1_IO14__ENET2_MDIO                           0x002C 0x0284 0x0574 0x2 0x0
+#define MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX                          0x002C 0x0284 0x04E0 0x3 0x0
+#define MX7D_PAD_GPIO1_IO14__WDOG3_WDOG_B                         0x002C 0x0284 0x0000 0x4 0x0
+#define MX7D_PAD_GPIO1_IO14__CCM_EXT_CLK3                         0x002C 0x0284 0x04EC 0x5 0x0
+#define MX7D_PAD_GPIO1_IO14__SDMA_EXT_EVENT0                      0x002C 0x0284 0x06D8 0x6 0x0
+#define MX7D_PAD_GPIO1_IO15__GPIO1_IO15                           0x0030 0x0288 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO15__SD3_WP                               0x0030 0x0288 0x073C 0x1 0x0
+#define MX7D_PAD_GPIO1_IO15__ENET2_MDC                            0x0030 0x0288 0x0000 0x2 0x0
+#define MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX                          0x0030 0x0288 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO15__WDOG4_WDOG_B                         0x0030 0x0288 0x0000 0x4 0x0
+#define MX7D_PAD_GPIO1_IO15__CCM_EXT_CLK4                         0x0030 0x0288 0x04F0 0x5 0x0
+#define MX7D_PAD_GPIO1_IO15__SDMA_EXT_EVENT1                      0x0030 0x0288 0x06DC 0x6 0x0
 #define MX7D_PAD_EPDC_DATA00__EPDC_DATA0                          0x0034 0x02A4 0x0000 0x0 0x0
 #define MX7D_PAD_EPDC_DATA00__SIM1_PORT2_TRXD                     0x0034 0x02A4 0x0000 0x1 0x0
 #define MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0                        0x0034 0x02A4 0x0000 0x2 0x0
-- 
1.9.1

[PATCH v1 5/6] ARM: dts: imx7d: add fec1 and fec2 support for i.MX7d soc

[Fugang Duan]

Add fec1 and fec2 nodes for i.MX7d soc.

Signed-off-by: Fugang Duan <B38611@freescale.com>
---
 arch/arm/boot/dts/imx7d.dtsi | 36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index b738ce0..7631492 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -729,6 +729,42 @@
 				bus-width = <4>;
 				status = "disabled";
 			};
+
+			fec1: ethernet@30be0000 {
+				compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
+				reg = <0x30be0000 0x10000>;
+				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
+					<&clks IMX7D_ENET_AXI_ROOT_CLK>,
+					<&clks IMX7D_ENET1_TIME_ROOT_CLK>,
+					<&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
+					<&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
+				clock-names = "ipg", "ahb", "ptp",
+					"enet_clk_ref", "enet_out";
+				fsl,num-tx-queues=<3>;
+				fsl,num-rx-queues=<3>;
+				status = "disabled";
+			};
+
+			fec2: ethernet@30bf0000 {
+				compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
+				reg = <0x30bf0000 0x10000>;
+				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
+					<&clks IMX7D_ENET_AXI_ROOT_CLK>,
+					<&clks IMX7D_ENET2_TIME_ROOT_CLK>,
+					<&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
+					<&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
+				clock-names = "ipg", "ahb", "ptp",
+					"enet_clk_ref", "enet_out";
+				fsl,num-tx-queues=<3>;
+				fsl,num-rx-queues=<3>;
+				status = "disabled";
+			};
 		};
 	};
 };
-- 
1.9.1

[PATCH v1 6/6] ARM: dts: imx7d-sdb: add fec1 and fec2 support

[Fugang Duan]

Enable fec1 and fec2 for i.MX7d-sdb board.

Signed-off-by: Fugang Duan <B38611@freescale.com>
---
 arch/arm/boot/dts/imx7d-sdb.dts | 76 ++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 75 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index 4d1a4b9..7d3e980 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -101,6 +101,45 @@
 	arm-supply = <&sw1a_reg>;
 };
 
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET2_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy1>;
+	fsl,magic-packet;
+	status = "okay";
+};
+
 &i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c1>;
@@ -246,6 +285,42 @@
 	pinctrl-0 = <&pinctrl_hog>;
 
 	imx7d-sdb {
+		pinctrl_enet1: enet1grp {
+			fsl,pins = <
+				MX7D_PAD_GPIO1_IO10__ENET1_MDIO			0x3
+				MX7D_PAD_GPIO1_IO11__ENET1_MDC			0x3
+				MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC	0x1
+				MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x1
+				MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x1
+				MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2	0x1
+				MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3	0x1
+				MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x1
+				MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC	0x1
+				MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x1
+				MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x1
+				MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x1
+				MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x1
+				MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x1
+			>;
+		};
+
+		pinctrl_enet2: enet2grp {
+			fsl,pins = <
+				MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC		0x1
+				MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0		0x1
+				MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1		0x1
+				MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2		0x1
+				MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3		0x1
+				MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL		0x1
+				MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC		0x1
+				MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0		0x1
+				MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1		0x1
+				MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2		0x1
+				MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3		0x1
+				MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL		0x1
+			>;
+		};
+
 		pinctrl_hog: hoggrp {
 			fsl,pins = <
 				MX7D_PAD_UART3_CTS_B__GPIO4_IO7		0x14
@@ -281,7 +356,6 @@
 			>;
 		};
 
-
 		pinctrl_uart1: uart1grp {
 			fsl,pins = <
 				MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
-- 
1.9.1

Re: [PATCH v1 1/6] net: phy: broadcom: add bcm54220 phy ID

[Florian Fainelli]

2015-08-18 22:33 GMT-07:00 Fugang Duan <b38611@freescale.com>:
> Add bcm54220 phy ID entry.

This change itself is fine, but looking at the rest of your changes,
we are not adding an entry for this PHY in drivers/net/phy/broadcom.c,
which means that we will bind to the Generic PHY driver, and so this
looks sufficient, even with your fixup done in the subsequent patch.

>
> Signed-off-by: Fugang Duan <B38611@freescale.com>
> ---
>  include/linux/brcmphy.h | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h
> index 697ca77..20bed15 100644
> --- a/include/linux/brcmphy.h
> +++ b/include/linux/brcmphy.h
> @@ -16,6 +16,7 @@
>  #define PHY_ID_BCM5482                 0x0143bcb0
>  #define PHY_ID_BCM5411                 0x00206070
>  #define PHY_ID_BCM5421                 0x002060e0
> +#define PHY_ID_BCM54220                        0x600d8589
>  #define PHY_ID_BCM5464                 0x002060b0
>  #define PHY_ID_BCM5461                 0x002060c0
>  #define PHY_ID_BCM54616S               0x03625d10
> --
> 1.9.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel



-- 
Florian

RE: [PATCH v1 1/6] net: phy: broadcom: add bcm54220 phy ID

[Duan Andy]

From: Florian Fainelli <f.fainelli@gmail.com> Sent: Thursday, August 20, 2015 5:29 AM
> To: Duan Fugang-B38611
> Cc: shawnguo@kernel.org; David Miller; netdev; linux-arm-
> kernel@lists.infradead.org
> Subject: Re: [PATCH v1 1/6] net: phy: broadcom: add bcm54220 phy ID
> 
> 2015-08-18 22:33 GMT-07:00 Fugang Duan <b38611@freescale.com>:
> > Add bcm54220 phy ID entry.
> 
> This change itself is fine, but looking at the rest of your changes, we
> are not adding an entry for this PHY in drivers/net/phy/broadcom.c, which
> means that we will bind to the Generic PHY driver, and so this looks
> sufficient, even with your fixup done in the subsequent patch.
> 

Thanks for your comment.

Yes, for the phy, the driver use generic phy driver. 
I see all Broadcom phy ID are defined in this file, we shouldn't define new phy id in other place.
When the phy is used more popular, I think the patch is very reasonable.

> >
> > Signed-off-by: Fugang Duan <B38611@freescale.com>
> > ---
> >  include/linux/brcmphy.h | 1 +
> >  1 file changed, 1 insertion(+)
> >
> > diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h index
> > 697ca77..20bed15 100644
> > --- a/include/linux/brcmphy.h
> > +++ b/include/linux/brcmphy.h
> > @@ -16,6 +16,7 @@
> >  #define PHY_ID_BCM5482                 0x0143bcb0
> >  #define PHY_ID_BCM5411                 0x00206070
> >  #define PHY_ID_BCM5421                 0x002060e0
> > +#define PHY_ID_BCM54220                        0x600d8589
> >  #define PHY_ID_BCM5464                 0x002060b0
> >  #define PHY_ID_BCM5461                 0x002060c0
> >  #define PHY_ID_BCM54616S               0x03625d10
> > --
> > 1.9.1
> >
> >
> > _______________________________________________
> > linux-arm-kernel mailing list
> > linux-arm-kernel@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 
> 
> 
> --
> Florian

Re: [PATCH v1 0/6] Add fec1 and fec2 support for i.MX7d sdb board

[David Miller]

From: Fugang Duan <b38611@freescale.com>
Date: Wed, 19 Aug 2015 13:33:58 +0800

> The patch series is to add fec support for i.MX7d sdb board. Since i.MX7d fec ip is
> the same as i.MX6SX, so there have no change for driver itself.
> 
> Patch#1: add bcm54220 PHY ID entry into brcmphy.h file.

This is completely, and utterly, pointless.

The only reason a PHY ID should be defined in brcmphy.h is so that it can
be used in the broadcom.c PHY driver or similar.

If there is no user in the tree, there is no reason to add it to the
header file.

Re: [PATCH v1 0/6] Add fec1 and fec2 support for i.MX7d sdb board

[Florian Fainelli]

On 20/08/15 14:05, David Miller wrote:
> From: Fugang Duan <b38611@freescale.com>
> Date: Wed, 19 Aug 2015 13:33:58 +0800
> 
>> The patch series is to add fec support for i.MX7d sdb board. Since i.MX7d fec ip is
>> the same as i.MX6SX, so there have no change for driver itself.
>>
>> Patch#1: add bcm54220 PHY ID entry into brcmphy.h file.
> 
> This is completely, and utterly, pointless.
> 
> The only reason a PHY ID should be defined in brcmphy.h is so that it can
> be used in the broadcom.c PHY driver or similar.
> 
> If there is no user in the tree, there is no reason to add it to the
> header file.

There is a valid reason for which you may have a PHY id, which is
defining a PHY fixup in your platform code like Andy is doing, however,
this should not be used in conjunction with the Generic PHY driver,
because this driver has absolutely no clue about your PHY fixup, and
this could create at best inconsistencies in how the fixup is managed
later on.

At the very least, I would like to see a change to
drivers/net/phy/broadcom.c which identifies this PHY id, and eventually
just invokes the genphy_* functions where relevant.
-- 
Florian

RE: [PATCH v1 0/6] Add fec1 and fec2 support for i.MX7d sdb board

[Duan Andy]

From: Florian Fainelli <f.fainelli@gmail.com>
> Sent: Friday, August 21, 2015 5:14 AM
> To: David Miller; Duan Fugang-B38611
> Cc: netdev@vger.kernel.org; shawnguo@kernel.org; linux-arm-
> kernel@lists.infradead.org
> Subject: Re: [PATCH v1 0/6] Add fec1 and fec2 support for i.MX7d sdb
> board
> 
> On 20/08/15 14:05, David Miller wrote:
> > From: Fugang Duan <b38611@freescale.com>
> > Date: Wed, 19 Aug 2015 13:33:58 +0800
> >
> >> The patch series is to add fec support for i.MX7d sdb board. Since
> >> i.MX7d fec ip is the same as i.MX6SX, so there have no change for
> driver itself.
> >>
> >> Patch#1: add bcm54220 PHY ID entry into brcmphy.h file.
> >
> > This is completely, and utterly, pointless.
> >
> > The only reason a PHY ID should be defined in brcmphy.h is so that it
> > can be used in the broadcom.c PHY driver or similar.
> >
> > If there is no user in the tree, there is no reason to add it to the
> > header file.
> 
> There is a valid reason for which you may have a PHY id, which is
> defining a PHY fixup in your platform code like Andy is doing, however,
> this should not be used in conjunction with the Generic PHY driver,
> because this driver has absolutely no clue about your PHY fixup, and this
> could create at best inconsistencies in how the fixup is managed later on.
> 
> At the very least, I would like to see a change to
> drivers/net/phy/broadcom.c which identifies this PHY id, and eventually
> just invokes the genphy_* functions where relevant.
> --
> Florian

I will try to add the phy support in Broadcom phy driver. Thanks for your comments.

Regards,
Andy

RE: [PATCH v1 0/6] Add fec1 and fec2 support for i.MX7d sdb board

[Duan Andy]

From: David Miller <davem@davemloft.net> Sent: Friday, August 21, 2015 5:06 AM
> To: Duan Fugang-B38611
> Cc: shawnguo@kernel.org; linux-arm-kernel@lists.infradead.org;
> netdev@vger.kernel.org
> Subject: Re: [PATCH v1 0/6] Add fec1 and fec2 support for i.MX7d sdb
> board
> 
> From: Fugang Duan <b38611@freescale.com>
> Date: Wed, 19 Aug 2015 13:33:58 +0800
> 
> > The patch series is to add fec support for i.MX7d sdb board. Since
> > i.MX7d fec ip is the same as i.MX6SX, so there have no change for
> driver itself.
> >
> > Patch#1: add bcm54220 PHY ID entry into brcmphy.h file.
> 
> This is completely, and utterly, pointless.
> 
> The only reason a PHY ID should be defined in brcmphy.h is so that it can
> be used in the broadcom.c PHY driver or similar.
> 
> If there is no user in the tree, there is no reason to add it to the
> header file.

Ok, I will try to add the phy support in Broadcom phy driver. Thanks for your comment.

Regards,
Andy