From mboxrd@z Thu Jan 1 00:00:00 1970 From: Florian Fainelli Subject: Re: [PATCH] net: phy: dp83848: Add TI DP83848 Ethernet PHY Date: Tue, 20 Oct 2015 14:37:15 -0700 Message-ID: <5626B40B.8090304@gmail.com> References: <1445376537-9291-1-git-send-email-afd@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org, Dan Murphy To: "Andrew F. Davis" , "David S. Miller" Return-path: In-Reply-To: <1445376537-9291-1-git-send-email-afd@ti.com> Sender: linux-kernel-owner@vger.kernel.org List-Id: netdev.vger.kernel.org On 20/10/15 14:28, Andrew F. Davis wrote: > Add support for the TI DP83848 Ethernet PHY device. > > The DP83848 is a highly reliable, feature rich, IEEE 802.3 compliant > single port 10/100 Mb/s Ethernet Physical Layer Transceiver supporting > the MII and RMII interfaces. > > Signed-off-by: Andrew F. Davis > Signed-off-by: Dan Murphy Reviewed-by: Florian Fainelli Just one comment below: [snip] > diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile > index 87f079c..b748224 100644 > --- a/drivers/net/phy/Makefile > +++ b/drivers/net/phy/Makefile > @@ -24,6 +24,7 @@ obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o > obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o > obj-$(CONFIG_NATIONAL_PHY) += national.o > obj-$(CONFIG_DP83640_PHY) += dp83640.o > +obj-$(CONFIG_DP83848_PHY) += dp83848.o > obj-$(CONFIG_DP83867_PHY) += dp83867.o This is a pretty small PHY driver, would it make sense to look into consolidating these into e.g: dp838xx.c for instance? dp83640 is big enough to be its own driver it seems. -- Florian