From: Bert Kenward <bkenward@solarflare.com>
To: David Miller <davem@davemloft.net>
Cc: <netdev@vger.kernel.org>, <linux-net-drivers@solarflare.com>
Subject: [PATCH v2 net-next 1/2] sfc: make TSO version a per-queue parameter
Date: Mon, 30 Nov 2015 09:05:35 +0000 [thread overview]
Message-ID: <565C115F.6050504@solarflare.com> (raw)
In-Reply-To: <cover.1448874133.git.bkenward@solarflare.com>
The Solarflare 8000 series NIC will use a new TSO scheme. The current
driver refuses to load if the current TSO scheme is not found. Remove
that check and instead make the TSO version a per-queue parameter.
Signed-off-by: Bert Kenward <bkenward@solarflare.com>
---
drivers/net/ethernet/sfc/ef10.c | 13 ++++++-------
drivers/net/ethernet/sfc/net_driver.h | 2 ++
drivers/net/ethernet/sfc/tx.c | 8 ++++++--
3 files changed, 14 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/sfc/ef10.c b/drivers/net/ethernet/sfc/ef10.c
index bc6d21b..425df3d 100644
--- a/drivers/net/ethernet/sfc/ef10.c
+++ b/drivers/net/ethernet/sfc/ef10.c
@@ -181,13 +181,6 @@ static int efx_ef10_init_datapath_caps(struct efx_nic *efx)
MCDI_WORD(outbuf, GET_CAPABILITIES_OUT_TX_DPCPU_FW_ID);
if (!(nic_data->datapath_caps &
- (1 << MC_CMD_GET_CAPABILITIES_OUT_TX_TSO_LBN))) {
- netif_err(efx, drv, efx->net_dev,
- "current firmware does not support TSO\n");
- return -ENODEV;
- }
-
- if (!(nic_data->datapath_caps &
(1 << MC_CMD_GET_CAPABILITIES_OUT_RX_PREFIX_LEN_14_LBN))) {
netif_err(efx, probe, efx->net_dev,
"current firmware does not support an RX prefix\n");
@@ -1797,6 +1790,12 @@ static void efx_ef10_tx_init(struct efx_tx_queue *tx_queue)
ESF_DZ_TX_OPTION_UDP_TCP_CSUM, csum_offload,
ESF_DZ_TX_OPTION_IP_CSUM, csum_offload);
tx_queue->write_count = 1;
+
+ if (nic_data->datapath_caps &
+ (1 << MC_CMD_GET_CAPABILITIES_OUT_TX_TSO_LBN)) {
+ tx_queue->tso_version = 1;
+ }
+
wmb();
efx_ef10_push_tx_desc(tx_queue, txd);
diff --git a/drivers/net/ethernet/sfc/net_driver.h b/drivers/net/ethernet/sfc/net_driver.h
index a8ddd12..5c0d0ba 100644
--- a/drivers/net/ethernet/sfc/net_driver.h
+++ b/drivers/net/ethernet/sfc/net_driver.h
@@ -182,6 +182,7 @@ struct efx_tx_buffer {
*
* @efx: The associated Efx NIC
* @queue: DMA queue number
+ * @tso_version: Version of TSO in use for this queue.
* @channel: The associated channel
* @core_txq: The networking core TX queue structure
* @buffer: The software buffer ring
@@ -228,6 +229,7 @@ struct efx_tx_queue {
/* Members which don't change on the fast path */
struct efx_nic *efx ____cacheline_aligned_in_smp;
unsigned queue;
+ unsigned int tso_version;
struct efx_channel *channel;
struct netdev_queue *core_txq;
struct efx_tx_buffer *buffer;
diff --git a/drivers/net/ethernet/sfc/tx.c b/drivers/net/ethernet/sfc/tx.c
index 67f6afa..f7a0ec1 100644
--- a/drivers/net/ethernet/sfc/tx.c
+++ b/drivers/net/ethernet/sfc/tx.c
@@ -1010,13 +1010,17 @@ static void efx_enqueue_unwind(struct efx_tx_queue *tx_queue,
/* Parse the SKB header and initialise state. */
static int tso_start(struct tso_state *st, struct efx_nic *efx,
+ struct efx_tx_queue *tx_queue,
const struct sk_buff *skb)
{
- bool use_opt_desc = efx_nic_rev(efx) >= EFX_REV_HUNT_A0;
struct device *dma_dev = &efx->pci_dev->dev;
unsigned int header_len, in_len;
+ bool use_opt_desc = false;
dma_addr_t dma_addr;
+ if (tx_queue->tso_version == 1)
+ use_opt_desc = true;
+
st->ip_off = skb_network_header(skb) - skb->data;
st->tcp_off = skb_transport_header(skb) - skb->data;
header_len = st->tcp_off + (tcp_hdr(skb)->doff << 2u);
@@ -1271,7 +1275,7 @@ static int efx_enqueue_skb_tso(struct efx_tx_queue *tx_queue,
/* Find the packet protocol and sanity-check it */
state.protocol = efx_tso_check_protocol(skb);
- rc = tso_start(&state, efx, skb);
+ rc = tso_start(&state, efx, tx_queue, skb);
if (rc)
goto mem_err;
--
2.4.3
next prev parent reply other threads:[~2015-11-30 9:05 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-25 16:04 [PATCH 0/2] Basic support for Solarflare 8000 series NICs Bert Kenward
2015-11-25 16:06 ` [PATCH 1/2] sfc: make TSO version a per-queue parameter Bert Kenward
2015-11-30 3:50 ` David Miller
2015-11-25 16:06 ` [PATCH 2/2] sfc: Add PCI ID for Solarflare 8000 series 10/40G NIC Bert Kenward
2015-11-30 9:05 ` [PATCH v2 net-next 0/2] Basic support for Solarflare 8000 series NICs Bert Kenward
2015-12-01 20:47 ` David Miller
[not found] ` <cover.1448874133.git.bkenward@solarflare.com>
2015-11-30 9:05 ` Bert Kenward [this message]
2015-11-30 9:05 ` [PATCH v2 net-next 2/2] sfc: Add PCI ID for Solarflare 8000 series 10/40G NIC Bert Kenward
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=565C115F.6050504@solarflare.com \
--to=bkenward@solarflare.com \
--cc=davem@davemloft.net \
--cc=linux-net-drivers@solarflare.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).