[P.A. Semi] Does the ethernet interface work on your Electra, Chitra, Nemo, and Athena board?

[P.A. Semi] Does the ethernet interface work on your Electra, Chitra, Nemo, and Athena board?

[Christian Zigotzky]

FYI

On 30 November 2015 at 10:48 AM, Christian Zigotzky wrote:
> Hi Denis,
>
> Thank you for your answer. Sorry because of my description.
>
> Yes, the driver probe function finds the device.
>
> With kernel 4.4-rc3:
>
> dmesg | grep -i eth0
>
> [ 2.297473] eth0: PA Semi GMAC: intf 5, hw addr 02:00:e0:0a:30:00
>
> dhclient eth0
>
> RTNETLINK answers: Cannot allocate memory
>
> With kernel 4.1.13:
>
> dmesg | grep -i eth0
>
> [ 2.328115] eth0: PA Semi GMAC: intf 5, hw addr 02:00:e0:0a:30:00
> [ 37.130466] eth0: Link is up at 100 Mbps, full duplex.
>
> Cheers,
>
> Christian
>
> On 30 November 2015 at 09:37 AM, Denis Kirjanov wrote:
>> On 11/29/15, Christian Zigotzky <chzigotzky@xenosoft.de> wrote:
>>> Hi All,
>>>
>>> Does the ethernet interface on your Electra, Chitra, Nemo, and Athena
>>> board work with the release candidates of the kernel 4.4? Unfortunately
>>> the P.A. Semi ethernet doesn't work on our Nemo boards with the release
>>> candidates of the kernel 4.4. We have set the following entries in the
>>> kernel config:
>>>
>>> CONFIG_NET_VENDOR_PASEMI=y
>>> CONFIG_PASEMI_MAC=y
>>>
>>> Could you please test the P.A. Semi ethernet on your P.A. Semi boards?
>> It's not clear from your descriptions what is not working. Does the
>> driver probe function find  a device? Does the interface show up in
>> the kernel? Can it send/receive packets?
>>
>> Also please CC netdev.
>>
>> Thanks.
>>
>>> Thanks in advance,
>>>
>>> Christian
>>> _______________________________________________
>>> Linuxppc-dev mailing list
>>> Linuxppc-dev@lists.ozlabs.org
>>> https://lists.ozlabs.org/listinfo/linuxppc-dev
>

[P.A. Semi] Does the ethernet interface work on your Electra, Chitra, Nemo, and Athena board?

[Christian Zigotzky]

Hi All,

I have tested the PA Semi Ethernet with the kernels 4.2.3 and 4.3.0 
today. With the kernel 4.2.3 it works but with the kernel 4.3.0 final it 
doesn't work.

After that I tested some git kernels and release candidates of 4.3.

Kernel 4.3 git from Tue Sep 01, 2015 -> PA Semi Ethernet works
Kernel 4.3 git from Wed Sep 02, 2015 -> PA Semi Ethernet works
Kernel 4.3 git from Thu Sep 03, 2015 -> PA Semi Ethernet works
Kernel 4.3 git from Fri Sep 04, 2015 -> PA Semi Ethernet doesn't work 
(Merge tag 'powerpc-4.3-1': 
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=ff474e8ca8547d09cb82ebab56d4c96f9eea01ce)
Kernel 4.3 git from Sat Sep 05, 2015 -> PA Semi Ethernet doesn't work
Kernel 4.3 git from Mon Sep 07, 2015 -> PA Semi Ethernet doesn't work
Kernel 4.3 git from Wed Sep 09, 2015 -> PA Semi Ethernet doesn't work
Kernel 4.3 git from Fri Sep 11, 2015 -> PA Semi Ethernet doesn't work
Kernel 4.3 RC1 from Sun Sep 13, 2015 -> PA Semi Ethernet doesn't work
Kernel 4.3 RC2 from Mon Sep 21, 2015 -> PA Semi Ethernet doesn't work

The problematic commit must be between Thu Sep 03, 2015 at 09:37 AM (UTC 
+2) and Fri Sep 04, 2015 at 7:38 PM (UTC +2) in the linux git.

Linux git: Between 
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/log/?ofs=15500 
and 
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/log/?ofs=15200.

Maybe 
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=ff474e8ca8547d09cb82ebab56d4c96f9eea01ce.

Cheers,

Christian

On 30 November 2015 at 10:48 AM, Christian Zigotzky wrote:
> Hi Denis,
>
> Thank you for your answer. Sorry because of my description.
>
> Yes, the driver probe function finds the device.
>
> With kernel 4.4-rc3:
>
> dmesg | grep -i eth0
>
> [ 2.297473] eth0: PA Semi GMAC: intf 5, hw addr 02:00:e0:0a:30:00
>
> dhclient eth0
>
> RTNETLINK answers: Cannot allocate memory
>
> With kernel 4.1.13:
>
> dmesg | grep -i eth0
>
> [ 2.328115] eth0: PA Semi GMAC: intf 5, hw addr 02:00:e0:0a:30:00
> [ 37.130466] eth0: Link is up at 100 Mbps, full duplex.
>
> Cheers,
>
> Christian
>
> On 30 November 2015 at 09:37 AM, Denis Kirjanov wrote:
>> On 11/29/15, Christian Zigotzky <chzigotzky@xenosoft.de> wrote:
>>> Hi All,
>>>
>>> Does the ethernet interface on your Electra, Chitra, Nemo, and Athena
>>> board work with the release candidates of the kernel 4.4? Unfortunately
>>> the P.A. Semi ethernet doesn't work on our Nemo boards with the release
>>> candidates of the kernel 4.4. We have set the following entries in the
>>> kernel config:
>>>
>>> CONFIG_NET_VENDOR_PASEMI=y
>>> CONFIG_PASEMI_MAC=y
>>>
>>> Could you please test the P.A. Semi ethernet on your P.A. Semi boards?
>> It's not clear from your descriptions what is not working. Does the
>> driver probe function find  a device? Does the interface show up in
>> the kernel? Can it send/receive packets?
>>
>> Also please CC netdev.
>>
>> Thanks.
>>
>>> Thanks in advance,
>>>
>>> Christian
>>> _______________________________________________
>>> Linuxppc-dev mailing list
>>> Linuxppc-dev@lists.ozlabs.org
>>> https://lists.ozlabs.org/listinfo/linuxppc-dev
>

Re: [P.A. Semi] Does the ethernet interface work on your Electra, Chitra, Nemo, and Athena board?

[Gabriel Paubert]

On Mon, Nov 30, 2015 at 06:08:23PM +0100, Christian Zigotzky wrote:
> Hi All,
> 
> I have tested the PA Semi Ethernet with the kernels 4.2.3 and 4.3.0
> today. With the kernel 4.2.3 it works but with the kernel 4.3.0
> final it doesn't work.
> 
> After that I tested some git kernels and release candidates of 4.3.
> 
> Kernel 4.3 git from Tue Sep 01, 2015 -> PA Semi Ethernet works
> Kernel 4.3 git from Wed Sep 02, 2015 -> PA Semi Ethernet works
> Kernel 4.3 git from Thu Sep 03, 2015 -> PA Semi Ethernet works
> Kernel 4.3 git from Fri Sep 04, 2015 -> PA Semi Ethernet doesn't
> work (Merge tag 'powerpc-4.3-1': https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=ff474e8ca8547d09cb82ebab56d4c96f9eea01ce)
> Kernel 4.3 git from Sat Sep 05, 2015 -> PA Semi Ethernet doesn't work
> Kernel 4.3 git from Mon Sep 07, 2015 -> PA Semi Ethernet doesn't work
> Kernel 4.3 git from Wed Sep 09, 2015 -> PA Semi Ethernet doesn't work
> Kernel 4.3 git from Fri Sep 11, 2015 -> PA Semi Ethernet doesn't work
> Kernel 4.3 RC1 from Sun Sep 13, 2015 -> PA Semi Ethernet doesn't work
> Kernel 4.3 RC2 from Mon Sep 21, 2015 -> PA Semi Ethernet doesn't work
> 
> The problematic commit must be between Thu Sep 03, 2015 at 09:37 AM
> (UTC +2) and Fri Sep 04, 2015 at 7:38 PM (UTC +2) in the linux git.
> 
> Linux git: Between https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/log/?ofs=15500
> and https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/log/?ofs=15200.
> 
> Maybe https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=ff474e8ca8547d09cb82ebab56d4c96f9eea01ce.

Unless I miss something, that's the kind of regression that "git bisect" is 
designed to find.

    Cheers,
    Gabriel

[P.A. Semi] Does the ethernet interface work on your Electra, Chitra, Nemo, and Athena board?

[Christian Zigotzky]

Hi All,

I compiled a lot of kernels for some git bisects and I have a result.

Test log

Kernel 4.3 git from Tue Sep 01, 2015 -> PA Semi Ethernet works
Kernel 4.3 git from Wed Sep 02, 2015 -> PA Semi Ethernet works
Kernel 4.3 git from Thu Sep 03, 2015 -> PA Semi Ethernet works
Kernel 4.3 git from Fri Sep 04, 2015 -> PA Semi Ethernet doesn't work
Kernel 4.3 git from Sat Sep 05, 2015 -> PA Semi Ethernet doesn't work
Kernel 4.3 git from Mon Sep 07, 2015 -> PA Semi Ethernet doesn't work
Kernel 4.3 git from Wed Sep 09, 2015 -> PA Semi Ethernet doesn't work
Kernel 4.3 git from Fri Sep 11, 2015 -> PA Semi Ethernet doesn't work
Kernel 4.3 RC1 from Sun Sep 13, 2015 -> PA Semi Ethernet doesn't work
Kernel 4.3 RC2 from Mon Sep 21, 2015 -> PA Semi Ethernet doesn't work

git clone 
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git linux-git

git bisect start

git bisect good ac0e137ab0da80e8fc0db2027598e2f7f82a5a02 2015-09-03 
00:07:10 (GMT)

git bisect bad 559ec2f8fd50981821621f52db5e1a8ffcf8d792 2015-09-04 
23:54:41 (GMT)

Output:

Bisecting: a merge base must be tested
[ba30011577330b7e29ecb5916d89c6db9fbc5b3d] clk: s5pv210: add missing 
call to samsung_clk_of_add_provider()

---

git bisect good

Output:

Bisecting: 4381 revisions left to test after this (roughly 12 steps)
[3959df1dfb9538498ec3372a2d390bc7fbdbfac2] Merge branch 
'ras-core-for-linus' of 
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

---

git bisect good

Output:

Bisecting: 2561 revisions left to test after this (roughly 11 steps)
[1e1a4e8f439113b7820bc7150569f685e1cc2b43] Merge tag 'dm-4.3-changes' of 
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

---

git bisect good

Output:

Bisecting: 1280 revisions left to test after this (roughly 10 steps)
[94c10f0ea303473884f69edd6bbb0cedcf570105] ah4: Fix error return in 
ah_input().

---

git bisect good

Output:

Bisecting: 697 revisions left to test after this (roughly 9 steps)
[4c92b5bb14226faa16d29a1df5752baf1ff22b53] Merge branch 'pcmcia' of 
git://ftp.arm.linux.org.uk/~rmk/linux-arm (2015-09-03 23:36:33 (GMT))

---

git bisect good

Output:

Bisecting: 310 revisions left to test after this (roughly 9 steps)
[a4fdb2a46f617b8b2cd47acec026ec16532edbc6] Merge tag 'arm64-upstream' of 
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux (2015-09-04 
14:18:09 (GMT))

---

git bisect bad

Output:

Bisecting: 237 revisions left to test after this (roughly 8 steps)
[2db97045aa40da4312f7321845bc52b136c8603a] Merge branch '4.2-fixes' into 
mips-for-linux-next (2015-09-03 12:06:33 (GMT))

---

git bisect good

Output:

Bisecting: 132 revisions left to test after this (roughly 7 steps)
[d690740f22f6520873f96e66aae7119ec2215755] powerpc/powernv: Enable LEDS 
support (2015-08-27 10:08:44 (GMT))

---

git bisect good

Output:

Bisecting: 66 revisions left to test after this (roughly 6 steps)
[662ba3dbceca3ca284885a464ecb8c936f417003] arm64: mm: add __init section 
marker to free_initrd_mem (2015-07-27 17:29:18 (GMT))

---

git bisect good

Output:

Bisecting: 33 revisions left to test after this (roughly 5 steps)
[259800135c654a098d9f0adfdd3d1f20eef1f231] powerpc/eeh: Fix fenced PHB 
caused by eeh_slot_error_detail() (2015-08-28 03:26:31 (GMT))

---

git bisect good

Output:

Bisecting: 16 revisions left to test after this (roughly 4 steps)
[04b8637be92f284409651088f3856f4290a931d8] arm64: alternatives: ensure 
secondary CPUs execute ISB after patching (2015-08-04 17:52:09 (GMT))

---

git bisect good

Output:

Bisecting: 8 revisions left to test after this (roughly 3 steps)
[8eafeb48022816513abc4f440bdad4c350fe81a3] of/fdt: make memblock maximum 
physical address arch configurable (2015-08-24 09:23:13 (GMT))

---

git bisect good

Output:

Bisecting: 4 revisions left to test after this (roughly 2 steps)
[ff474e8ca8547d09cb82ebab56d4c96f9eea01ce] Merge tag 'powerpc-4.3-1' of 
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux (2015-09-03 
23:41:38 (GMT))

---

git bisect bad

Output:

Bisecting: 1 revision left to test after this (roughly 1 step)
[55e07668fbba9466e6a9ef7650718356cda38406] cxl: Fix force unmapping 
mmaps of contexts allocated through the kernel api (2015-08-30 08:47:26 
(GMT))

---

git bisect good

Output:

Bisecting: 0 revisions left to test after this (roughly 0 steps)
[390fd5929f52bdfb9dfcc03820041ba556780f4a] cxl: Set up and enable PSL 
Timebase (2015-08-30 08:56:34 (GMT))

---

git bisect good

Output:

ff474e8ca8547d09cb82ebab56d4c96f9eea01ce is the first bad commit (Merge 
tag 'powerpc-4.3-1' of 
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux (2015-09-03 
23:41:38 (GMT))

---

Cheers,

Christian

On 30 November 2015 7:12 PM, Gabriel Paubert wrote:
> On Mon, Nov 30, 2015 at 06:08:23PM +0100, Christian Zigotzky wrote:
>> Hi All,
>>
>> I have tested the PA Semi Ethernet with the kernels 4.2.3 and 4.3.0
>> today. With the kernel 4.2.3 it works but with the kernel 4.3.0
>> final it doesn't work.
>>
>> After that I tested some git kernels and release candidates of 4.3.
>>
>> Kernel 4.3 git from Tue Sep 01, 2015 -> PA Semi Ethernet works
>> Kernel 4.3 git from Wed Sep 02, 2015 -> PA Semi Ethernet works
>> Kernel 4.3 git from Thu Sep 03, 2015 -> PA Semi Ethernet works
>> Kernel 4.3 git from Fri Sep 04, 2015 -> PA Semi Ethernet doesn't
>> work (Merge tag 'powerpc-4.3-1': https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=ff474e8ca8547d09cb82ebab56d4c96f9eea01ce)
>> Kernel 4.3 git from Sat Sep 05, 2015 -> PA Semi Ethernet doesn't work
>> Kernel 4.3 git from Mon Sep 07, 2015 -> PA Semi Ethernet doesn't work
>> Kernel 4.3 git from Wed Sep 09, 2015 -> PA Semi Ethernet doesn't work
>> Kernel 4.3 git from Fri Sep 11, 2015 -> PA Semi Ethernet doesn't work
>> Kernel 4.3 RC1 from Sun Sep 13, 2015 -> PA Semi Ethernet doesn't work
>> Kernel 4.3 RC2 from Mon Sep 21, 2015 -> PA Semi Ethernet doesn't work
>>
>> The problematic commit must be between Thu Sep 03, 2015 at 09:37 AM
>> (UTC +2) and Fri Sep 04, 2015 at 7:38 PM (UTC +2) in the linux git.
>>
>> Linux git: Between https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/log/?ofs=15500
>> and https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/log/?ofs=15200.
>>
>> Maybe https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=ff474e8ca8547d09cb82ebab56d4c96f9eea01ce.
> Unless I miss something, that's the kind of regression that "git bisect" is
> designed to find.
>
>      Cheers,
>      Gabriel
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/linuxppc-dev

[P.A. Semi] Does the ethernet interface work on your Electra, Chitra, Nemo, and Athena board?

[Christian Zigotzky]

Hi all,

We tested some 4.3 kernels on a P.A. Semi reference board. Ultimately, 
ethernet does not work, though on the reference board, the interface is 
detected, gets link, but will not pass any packets/traffic.

Somewhere in the source code of the commit "'powerpc-4.3-1' of 
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux (2015-09-03 
23:41:38 (GMT)" is the problem.

Could you please help us to solve the problem?

Thanks in advance,

Christian Zigotzky

On 01 December 2015 at 3:47 PM, Christian Zigotzky wrote:
> Hi All,
>
> I compiled a lot of kernels for some git bisects and I have a result.
>
> Test log
>
> Kernel 4.3 git from Tue Sep 01, 2015 -> PA Semi Ethernet works
> Kernel 4.3 git from Wed Sep 02, 2015 -> PA Semi Ethernet works
> Kernel 4.3 git from Thu Sep 03, 2015 -> PA Semi Ethernet works
> Kernel 4.3 git from Fri Sep 04, 2015 -> PA Semi Ethernet doesn't work
> Kernel 4.3 git from Sat Sep 05, 2015 -> PA Semi Ethernet doesn't work
> Kernel 4.3 git from Mon Sep 07, 2015 -> PA Semi Ethernet doesn't work
> Kernel 4.3 git from Wed Sep 09, 2015 -> PA Semi Ethernet doesn't work
> Kernel 4.3 git from Fri Sep 11, 2015 -> PA Semi Ethernet doesn't work
> Kernel 4.3 RC1 from Sun Sep 13, 2015 -> PA Semi Ethernet doesn't work
> Kernel 4.3 RC2 from Mon Sep 21, 2015 -> PA Semi Ethernet doesn't work
>
> git clone 
> git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git 
> linux-git
>
> git bisect start
>
> git bisect good ac0e137ab0da80e8fc0db2027598e2f7f82a5a02 2015-09-03 
> 00:07:10 (GMT)
>
> git bisect bad 559ec2f8fd50981821621f52db5e1a8ffcf8d792 2015-09-04 
> 23:54:41 (GMT)
>
> Output:
>
> Bisecting: a merge base must be tested
> [ba30011577330b7e29ecb5916d89c6db9fbc5b3d] clk: s5pv210: add missing 
> call to samsung_clk_of_add_provider()
>
> ---
>
> git bisect good
>
> Output:
>
> Bisecting: 4381 revisions left to test after this (roughly 12 steps)
> [3959df1dfb9538498ec3372a2d390bc7fbdbfac2] Merge branch 
> 'ras-core-for-linus' of 
> git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
>
> ---
>
> git bisect good
>
> Output:
>
> Bisecting: 2561 revisions left to test after this (roughly 11 steps)
> [1e1a4e8f439113b7820bc7150569f685e1cc2b43] Merge tag 'dm-4.3-changes' 
> of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
>
> ---
>
> git bisect good
>
> Output:
>
> Bisecting: 1280 revisions left to test after this (roughly 10 steps)
> [94c10f0ea303473884f69edd6bbb0cedcf570105] ah4: Fix error return in 
> ah_input().
>
> ---
>
> git bisect good
>
> Output:
>
> Bisecting: 697 revisions left to test after this (roughly 9 steps)
> [4c92b5bb14226faa16d29a1df5752baf1ff22b53] Merge branch 'pcmcia' of 
> git://ftp.arm.linux.org.uk/~rmk/linux-arm (2015-09-03 23:36:33 (GMT))
>
> ---
>
> git bisect good
>
> Output:
>
> Bisecting: 310 revisions left to test after this (roughly 9 steps)
> [a4fdb2a46f617b8b2cd47acec026ec16532edbc6] Merge tag 'arm64-upstream' 
> of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux 
> (2015-09-04 14:18:09 (GMT))
>
> ---
>
> git bisect bad
>
> Output:
>
> Bisecting: 237 revisions left to test after this (roughly 8 steps)
> [2db97045aa40da4312f7321845bc52b136c8603a] Merge branch '4.2-fixes' 
> into mips-for-linux-next (2015-09-03 12:06:33 (GMT))
>
> ---
>
> git bisect good
>
> Output:
>
> Bisecting: 132 revisions left to test after this (roughly 7 steps)
> [d690740f22f6520873f96e66aae7119ec2215755] powerpc/powernv: Enable 
> LEDS support (2015-08-27 10:08:44 (GMT))
>
> ---
>
> git bisect good
>
> Output:
>
> Bisecting: 66 revisions left to test after this (roughly 6 steps)
> [662ba3dbceca3ca284885a464ecb8c936f417003] arm64: mm: add __init 
> section marker to free_initrd_mem (2015-07-27 17:29:18 (GMT))
>
> ---
>
> git bisect good
>
> Output:
>
> Bisecting: 33 revisions left to test after this (roughly 5 steps)
> [259800135c654a098d9f0adfdd3d1f20eef1f231] powerpc/eeh: Fix fenced PHB 
> caused by eeh_slot_error_detail() (2015-08-28 03:26:31 (GMT))
>
> ---
>
> git bisect good
>
> Output:
>
> Bisecting: 16 revisions left to test after this (roughly 4 steps)
> [04b8637be92f284409651088f3856f4290a931d8] arm64: alternatives: ensure 
> secondary CPUs execute ISB after patching (2015-08-04 17:52:09 (GMT))
>
> ---
>
> git bisect good
>
> Output:
>
> Bisecting: 8 revisions left to test after this (roughly 3 steps)
> [8eafeb48022816513abc4f440bdad4c350fe81a3] of/fdt: make memblock 
> maximum physical address arch configurable (2015-08-24 09:23:13 (GMT))
>
> ---
>
> git bisect good
>
> Output:
>
> Bisecting: 4 revisions left to test after this (roughly 2 steps)
> [ff474e8ca8547d09cb82ebab56d4c96f9eea01ce] Merge tag 'powerpc-4.3-1' 
> of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux 
> (2015-09-03 23:41:38 (GMT))
>
> ---
>
> git bisect bad
>
> Output:
>
> Bisecting: 1 revision left to test after this (roughly 1 step)
> [55e07668fbba9466e6a9ef7650718356cda38406] cxl: Fix force unmapping 
> mmaps of contexts allocated through the kernel api (2015-08-30 
> 08:47:26 (GMT))
>
> ---
>
> git bisect good
>
> Output:
>
> Bisecting: 0 revisions left to test after this (roughly 0 steps)
> [390fd5929f52bdfb9dfcc03820041ba556780f4a] cxl: Set up and enable PSL 
> Timebase (2015-08-30 08:56:34 (GMT))
>
> ---
>
> git bisect good
>
> Output:
>
> ff474e8ca8547d09cb82ebab56d4c96f9eea01ce is the first bad commit 
> (Merge tag 'powerpc-4.3-1' of 
> git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux 
> (2015-09-03 23:41:38 (GMT))
>
> ---
>
> Cheers,
>
> Christian
>
> On 30 November 2015 7:12 PM, Gabriel Paubert wrote:
>> On Mon, Nov 30, 2015 at 06:08:23PM +0100, Christian Zigotzky wrote:
>>> Hi All,
>>>
>>> I have tested the PA Semi Ethernet with the kernels 4.2.3 and 4.3.0
>>> today. With the kernel 4.2.3 it works but with the kernel 4.3.0
>>> final it doesn't work.
>>>
>>> After that I tested some git kernels and release candidates of 4.3.
>>>
>>> Kernel 4.3 git from Tue Sep 01, 2015 -> PA Semi Ethernet works
>>> Kernel 4.3 git from Wed Sep 02, 2015 -> PA Semi Ethernet works
>>> Kernel 4.3 git from Thu Sep 03, 2015 -> PA Semi Ethernet works
>>> Kernel 4.3 git from Fri Sep 04, 2015 -> PA Semi Ethernet doesn't
>>> work (Merge tag 'powerpc-4.3-1': 
>>> https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=ff474e8ca8547d09cb82ebab56d4c96f9eea01ce)
>>> Kernel 4.3 git from Sat Sep 05, 2015 -> PA Semi Ethernet doesn't work
>>> Kernel 4.3 git from Mon Sep 07, 2015 -> PA Semi Ethernet doesn't work
>>> Kernel 4.3 git from Wed Sep 09, 2015 -> PA Semi Ethernet doesn't work
>>> Kernel 4.3 git from Fri Sep 11, 2015 -> PA Semi Ethernet doesn't work
>>> Kernel 4.3 RC1 from Sun Sep 13, 2015 -> PA Semi Ethernet doesn't work
>>> Kernel 4.3 RC2 from Mon Sep 21, 2015 -> PA Semi Ethernet doesn't work
>>>
>>> The problematic commit must be between Thu Sep 03, 2015 at 09:37 AM
>>> (UTC +2) and Fri Sep 04, 2015 at 7:38 PM (UTC +2) in the linux git.
>>>
>>> Linux git: Between 
>>> https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/log/?ofs=15500
>>> and 
>>> https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/log/?ofs=15200.
>>>
>>> Maybe 
>>> https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=ff474e8ca8547d09cb82ebab56d4c96f9eea01ce.
>> Unless I miss something, that's the kind of regression that "git 
>> bisect" is
>> designed to find.
>>
>>      Cheers,
>>      Gabriel
>> _______________________________________________
>> Linuxppc-dev mailing list
>> Linuxppc-dev@lists.ozlabs.org
>> https://lists.ozlabs.org/listinfo/linuxppc-dev
>
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/linuxppc-dev

Re: [P.A. Semi] Does the ethernet interface work on your Electra, Chitra, Nemo, and Athena board?

[Michael Ellerman]

On Wed, 2015-12-02 at 05:59 +0100, Christian Zigotzky wrote:
> Hi all,
> 
> We tested some 4.3 kernels on a P.A. Semi reference board. Ultimately, 
> ethernet does not work, though on the reference board, the interface is 
> detected, gets link, but will not pass any packets/traffic.
> 
> Somewhere in the source code of the commit "'powerpc-4.3-1' of 
> git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux (2015-09-03 
> 23:41:38 (GMT)" is the problem.
> 
> Could you please help us to solve the problem?

Hi Christian,

Unfortunately there is no source code in that commit, it's just a merge. And
your bisect run found that the very first commit in that merge was OK:

> > [390fd5929f52bdfb9dfcc03820041ba556780f4a] cxl: Set up and enable PSL 
> > git bisect good

So I'm not convinced your bisect run was correct, sorry.

My pasemi is booting OK, but I haven't had time to test the network. If you
remind me next week I will make sure network is working on my board.

Are you testing your board with your additional patch as well? Or just vanilla
mainline?

cheers

[P.A. Semi] Does the ethernet interface work on your Electra, Chitra, Nemo, and Athena board?

[Christian Zigotzky]

Hi Michael,

Thanks a lot for your answer. We tested some vanilla mainline 4.3 
kernels on an Electra reference board. Additionally we tested some 
patched 4.3 kernels on our Nemo boards.

It would be really fantastic, if you could fix the problem.

Cheers,

Christian

On 02 December 2015 at 09:14 AM, Michael Ellerman wrote:
> On Wed, 2015-12-02 at 05:59 +0100, Christian Zigotzky wrote:
>> Hi all,
>>
>> We tested some 4.3 kernels on a P.A. Semi reference board. Ultimately,
>> ethernet does not work, though on the reference board, the interface is
>> detected, gets link, but will not pass any packets/traffic.
>>
>> Somewhere in the source code of the commit "'powerpc-4.3-1' of
>> git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux (2015-09-03
>> 23:41:38 (GMT)" is the problem.
>>
>> Could you please help us to solve the problem?
> Hi Christian,
>
> Unfortunately there is no source code in that commit, it's just a merge. And
> your bisect run found that the very first commit in that merge was OK:
>
>>> [390fd5929f52bdfb9dfcc03820041ba556780f4a] cxl: Set up and enable PSL
>>> git bisect good
> So I'm not convinced your bisect run was correct, sorry.
>
> My pasemi is booting OK, but I haven't had time to test the network. If you
> remind me next week I will make sure network is working on my board.
>
> Are you testing your board with your additional patch as well? Or just vanilla
> mainline?
>
> cheers
>
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/linuxppc-dev

[P.A. Semi] Does the ethernet interface work on your Electra, Chitra, Nemo, and Athena board?

[Christian Zigotzky]

Hi Michael,

I checked out the Linux git till the commit 'powerpc-4.3-1'

git checkout ff474e8ca8547d09cb82ebab56d4c96f9eea01ce

Output:

Checking out files: 100% (13843/13843), done.
Note: checking out 'ff474e8ca8547d09cb82ebab56d4c96f9eea01ce'.

You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by performing another checkout.

If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -b with the checkout command again. Example:

   git checkout -b new_branch_name

HEAD ist jetzt bei ff474e8... Merge tag 'powerpc-4.3-1' of 
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

---

The P.A. Semi Ethernet doesn't work with the powerpc-4.3-1 merge. I 
reverted this merge with:

git revert ff474e8ca8547d09cb82ebab56d4c96f9eea01ce -m 1

Output:

  Committer: christian <christian@AmigaoneX1000.lan>
Ihr Name und E-Mail Adresse wurden automatisch auf Basis
Ihres Benutzer- und Rechnernamens konfiguriert. Bitte prüfen Sie, dass
diese zutreffend sind. Sie können diese Meldung unterdrücken, indem Sie
diese explizit setzen:

     git config --global user.name "Ihr Name"
     git config --global user.email ihre@emailadresse.de

Nachdem Sie das getan hast, können Sie Ihre Identität für diesen Commit 
ändern mit:

     git commit --amend --reset-author

  146 files changed, 2047 insertions(+), 3609 deletions(-)
  delete mode 100644 Documentation/devicetree/bindings/leds/leds-powernv.txt
  delete mode 100644 Documentation/devicetree/bindings/powerpc/fsl/scfg.txt
  delete mode 100644 arch/powerpc/boot/dts/t1040d4rdb.dts
  delete mode 100644 arch/powerpc/boot/dts/t1042d4rdb.dts
  delete mode 100644 arch/powerpc/boot/dts/t104xd4rdb.dtsi
  delete mode 100644 arch/powerpc/configs/85xx-32bit.config
  delete mode 100644 arch/powerpc/configs/85xx-64bit.config
  delete mode 100644 arch/powerpc/configs/85xx-hw.config
  delete mode 100644 arch/powerpc/configs/85xx-smp.config
  delete mode 100644 arch/powerpc/configs/altivec.config
  create mode 100644 arch/powerpc/configs/corenet32_smp_defconfig
  rename arch/powerpc/configs/{fsl-emb-nonhw.config => 
corenet64_smp_defconfig} (50%)
  delete mode 100644 arch/powerpc/configs/corenet_basic_defconfig
  delete mode 100644 arch/powerpc/configs/mpc85xx_basic_defconfig
  create mode 100644 arch/powerpc/configs/mpc85xx_defconfig
  create mode 100644 arch/powerpc/configs/mpc85xx_smp_defconfig
  delete mode 100644 arch/powerpc/include/asm/trace_clock.h
  delete mode 100644 arch/powerpc/kernel/trace_clock.c
  rewrite arch/powerpc/platforms/powernv/opal-power.c (76%)
  delete mode 100644 drivers/leds/leds-powernv.c

---

After that the P.A. Semi Ethernet works without any problems.

Cheers,

Christian

On 02 December 2015 at 10:11 PM, Christian Zigotzky wrote:
> Hi Michael,
>
> Thanks a lot for your answer. We tested some vanilla mainline 4.3 
> kernels on an Electra reference board. Additionally we tested some 
> patched 4.3 kernels on our Nemo boards.
>
> It would be really fantastic, if you could fix the problem.
>
> Cheers,
>
> Christian
>
> On 02 December 2015 at 09:14 AM, Michael Ellerman wrote:
>> On Wed, 2015-12-02 at 05:59 +0100, Christian Zigotzky wrote:
>>> Hi all,
>>>
>>> We tested some 4.3 kernels on a P.A. Semi reference board. Ultimately,
>>> ethernet does not work, though on the reference board, the interface is
>>> detected, gets link, but will not pass any packets/traffic.
>>>
>>> Somewhere in the source code of the commit "'powerpc-4.3-1' of
>>> git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux (2015-09-03
>>> 23:41:38 (GMT)" is the problem.
>>>
>>> Could you please help us to solve the problem?
>> Hi Christian,
>>
>> Unfortunately there is no source code in that commit, it's just a 
>> merge. And
>> your bisect run found that the very first commit in that merge was OK:
>>
>>>> [390fd5929f52bdfb9dfcc03820041ba556780f4a] cxl: Set up and enable PSL
>>>> git bisect good
>> So I'm not convinced your bisect run was correct, sorry.
>>
>> My pasemi is booting OK, but I haven't had time to test the network. 
>> If you
>> remind me next week I will make sure network is working on my board.
>>
>> Are you testing your board with your additional patch as well? Or 
>> just vanilla
>> mainline?
>>
>> cheers
>>
>> _______________________________________________
>> Linuxppc-dev mailing list
>> Linuxppc-dev@lists.ozlabs.org
>> https://lists.ozlabs.org/listinfo/linuxppc-dev
>
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/linuxppc-dev

[P.A. Semi] Does the ethernet interface work on your Electra, Chitra, Nemo, and Athena board?

[Christian Zigotzky]

[-- Attachment #1: Type: text/plain, Size: 3117 bytes --]

Michael,

Maybe a DMA issue. Please find attached an output of strace.

Cheers,

Christian

On 03 December 2015 1:37 PM, Christian Zigotzky wrote:
> Hi Michael,
>
> I checked out the Linux git till the commit 'powerpc-4.3-1'
>
> git checkout ff474e8ca8547d09cb82ebab56d4c96f9eea01ce
>
> Output:
>
> Checking out files: 100% (13843/13843), done.
> Note: checking out 'ff474e8ca8547d09cb82ebab56d4c96f9eea01ce'.
>
> You are in 'detached HEAD' state. You can look around, make experimental
> changes and commit them, and you can discard any commits you make in this
> state without impacting any branches by performing another checkout.
>
> If you want to create a new branch to retain commits you create, you may
> do so (now or later) by using -b with the checkout command again. 
> Example:
>
>   git checkout -b new_branch_name
>
> HEAD ist jetzt bei ff474e8... Merge tag 'powerpc-4.3-1' of 
> git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
>
> ---
>
> The P.A. Semi Ethernet doesn't work with the powerpc-4.3-1 merge. I 
> reverted this merge with:
>
> git revert ff474e8ca8547d09cb82ebab56d4c96f9eea01ce -m 1
>
> Output:
>
>  Committer: christian <christian@AmigaoneX1000.lan>
> Ihr Name und E-Mail Adresse wurden automatisch auf Basis
> Ihres Benutzer- und Rechnernamens konfiguriert. Bitte prüfen Sie, dass
> diese zutreffend sind. Sie können diese Meldung unterdrücken, indem Sie
> diese explizit setzen:
>
>     git config --global user.name "Ihr Name"
>     git config --global user.email ihre@emailadresse.de
>
> Nachdem Sie das getan hast, können Sie Ihre Identität für diesen 
> Commit ändern mit:
>
>     git commit --amend --reset-author
>
>  146 files changed, 2047 insertions(+), 3609 deletions(-)
>  delete mode 100644 
> Documentation/devicetree/bindings/leds/leds-powernv.txt
>  delete mode 100644 
> Documentation/devicetree/bindings/powerpc/fsl/scfg.txt
>  delete mode 100644 arch/powerpc/boot/dts/t1040d4rdb.dts
>  delete mode 100644 arch/powerpc/boot/dts/t1042d4rdb.dts
>  delete mode 100644 arch/powerpc/boot/dts/t104xd4rdb.dtsi
>  delete mode 100644 arch/powerpc/configs/85xx-32bit.config
>  delete mode 100644 arch/powerpc/configs/85xx-64bit.config
>  delete mode 100644 arch/powerpc/configs/85xx-hw.config
>  delete mode 100644 arch/powerpc/configs/85xx-smp.config
>  delete mode 100644 arch/powerpc/configs/altivec.config
>  create mode 100644 arch/powerpc/configs/corenet32_smp_defconfig
>  rename arch/powerpc/configs/{fsl-emb-nonhw.config => 
> corenet64_smp_defconfig} (50%)
>  delete mode 100644 arch/powerpc/configs/corenet_basic_defconfig
>  delete mode 100644 arch/powerpc/configs/mpc85xx_basic_defconfig
>  create mode 100644 arch/powerpc/configs/mpc85xx_defconfig
>  create mode 100644 arch/powerpc/configs/mpc85xx_smp_defconfig
>  delete mode 100644 arch/powerpc/include/asm/trace_clock.h
>  delete mode 100644 arch/powerpc/kernel/trace_clock.c
>  rewrite arch/powerpc/platforms/powernv/opal-power.c (76%)
>  delete mode 100644 drivers/leds/leds-powernv.c
>
> ---
>
> After that the P.A. Semi Ethernet works without any problems.
>
> Cheers,
>
> Christian
>


[-- Attachment #2: strace_ifconfig_eth0_up_pasemi_mac.txt --]
[-- Type: text/plain, Size: 9846 bytes --]

execve("/sbin/ifconfig", ["ifconfig", "eth0", "up"], [/* 33 vars */]) = 0
brk(0)                                  = 0x10022000
access("/etc/ld.so.nohwcap", F_OK)      = -1 ENOENT (No such file or directory)
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xf7dff000
access("/etc/ld.so.preload", R_OK)      = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=155410, ...}) = 0
mmap(NULL, 155410, PROT_READ, MAP_PRIVATE, 3, 0) = 0xf7da9000
close(3)                                = 0
access("/etc/ld.so.nohwcap", F_OK)      = -1 ENOENT (No such file or directory)
open("/lib/powerpc-linux-gnu/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\1\2\1\3\0\0\0\0\0\0\0\0\0\3\0\24\0\0\0\1\0\0025\240\0\0\0004"..., 512) = 512
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xf7dfe000
fstat64(3, {st_mode=S_IFREG|0755, st_size=1565776, ...}) = 0
mmap(0xfe60000, 1635768, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xfe60000
mprotect(0xffd8000, 61440, PROT_NONE)   = 0
mmap(0xffe7000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x177000) = 0xffe7000
mmap(0xffed000, 9656, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xffed000
close(3)                                = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xf7dfd000
mprotect(0xffe7000, 20480, PROT_READ)   = 0
mprotect(0x1001f000, 4096, PROT_READ)   = 0
mprotect(0xf7e00000, 4096, PROT_READ)   = 0
munmap(0xf7da9000, 155410)              = 0
brk(0)                                  = 0x10022000
brk(0x10043000)                         = 0x10043000
open("/usr/lib/locale/locale-archive", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/share/locale/locale.alias", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/locale/de_DE.UTF-8/LC_IDENTIFICATION", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/locale/de_DE.utf8/LC_IDENTIFICATION", O_RDONLY|O_CLOEXEC) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=363, ...}) = 0
mmap(NULL, 363, PROT_READ, MAP_PRIVATE, 3, 0) = 0xf7dfc000
close(3)                                = 0
open("/usr/lib/powerpc-linux-gnu/gconv/gconv-modules.cache", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=26260, ...}) = 0
mmap(NULL, 26260, PROT_READ, MAP_SHARED, 3, 0) = 0xf7df5000
close(3)                                = 0
open("/usr/lib/locale/de_DE.UTF-8/LC_MEASUREMENT", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/locale/de_DE.utf8/LC_MEASUREMENT", O_RDONLY|O_CLOEXEC) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=23, ...}) = 0
mmap(NULL, 23, PROT_READ, MAP_PRIVATE, 3, 0) = 0xf7df4000
close(3)                                = 0
open("/usr/lib/locale/de_DE.UTF-8/LC_TELEPHONE", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/locale/de_DE.utf8/LC_TELEPHONE", O_RDONLY|O_CLOEXEC) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=56, ...}) = 0
mmap(NULL, 56, PROT_READ, MAP_PRIVATE, 3, 0) = 0xf7df3000
close(3)                                = 0
open("/usr/lib/locale/de_DE.UTF-8/LC_ADDRESS", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/locale/de_DE.utf8/LC_ADDRESS", O_RDONLY|O_CLOEXEC) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=155, ...}) = 0
mmap(NULL, 155, PROT_READ, MAP_PRIVATE, 3, 0) = 0xf7df2000
close(3)                                = 0
open("/usr/lib/locale/de_DE.UTF-8/LC_NAME", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/locale/de_DE.utf8/LC_NAME", O_RDONLY|O_CLOEXEC) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=83, ...}) = 0
mmap(NULL, 83, PROT_READ, MAP_PRIVATE, 3, 0) = 0xf7df1000
close(3)                                = 0
open("/usr/lib/locale/de_DE.UTF-8/LC_PAPER", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/locale/de_DE.utf8/LC_PAPER", O_RDONLY|O_CLOEXEC) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=34, ...}) = 0
mmap(NULL, 34, PROT_READ, MAP_PRIVATE, 3, 0) = 0xf7dce000
close(3)                                = 0
open("/usr/lib/locale/de_DE.UTF-8/LC_MESSAGES", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/locale/de_DE.utf8/LC_MESSAGES", O_RDONLY|O_CLOEXEC) = 3
fstat64(3, {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
close(3)                                = 0
open("/usr/lib/locale/de_DE.utf8/LC_MESSAGES/SYS_LC_MESSAGES", O_RDONLY|O_CLOEXEC) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=54, ...}) = 0
mmap(NULL, 54, PROT_READ, MAP_PRIVATE, 3, 0) = 0xf7dcd000
close(3)                                = 0
open("/usr/lib/locale/de_DE.UTF-8/LC_MONETARY", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/locale/de_DE.utf8/LC_MONETARY", O_RDONLY|O_CLOEXEC) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=294, ...}) = 0
mmap(NULL, 294, PROT_READ, MAP_PRIVATE, 3, 0) = 0xf7dcc000
close(3)                                = 0
open("/usr/lib/locale/de_DE.UTF-8/LC_COLLATE", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/locale/de_DE.utf8/LC_COLLATE", O_RDONLY|O_CLOEXEC) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=1243766, ...}) = 0
mmap(NULL, 1243766, PROT_READ, MAP_PRIVATE, 3, 0) = 0xf7c9c000
close(3)                                = 0
open("/usr/lib/locale/de_DE.UTF-8/LC_TIME", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/locale/de_DE.utf8/LC_TIME", O_RDONLY|O_CLOEXEC) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=2354, ...}) = 0
mmap(NULL, 2354, PROT_READ, MAP_PRIVATE, 3, 0) = 0xf7c9b000
close(3)                                = 0
open("/usr/lib/locale/de_DE.UTF-8/LC_NUMERIC", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/locale/de_DE.utf8/LC_NUMERIC", O_RDONLY|O_CLOEXEC) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=54, ...}) = 0
mmap(NULL, 54, PROT_READ, MAP_PRIVATE, 3, 0) = 0xf7c9a000
close(3)                                = 0
open("/usr/lib/locale/de_DE.UTF-8/LC_CTYPE", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/locale/de_DE.utf8/LC_CTYPE", O_RDONLY|O_CLOEXEC) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=256580, ...}) = 0
mmap(NULL, 256580, PROT_READ, MAP_PRIVATE, 3, 0) = 0xf7c5b000
close(3)                                = 0
uname({sysname="Linux", nodename="AmigaoneX1000", ...}) = 0
access("/proc/net", R_OK)               = 0
access("/proc/net/unix", R_OK)          = 0
socket(PF_LOCAL, SOCK_DGRAM, 0)         = 3
socket(PF_INET, SOCK_DGRAM, IPPROTO_IP) = 4
access("/proc/net/if_inet6", R_OK)      = 0
socket(PF_INET6, SOCK_DGRAM, IPPROTO_IP) = 5
access("/proc/net/ax25", R_OK)          = -1 ENOENT (No such file or directory)
access("/proc/net/nr", R_OK)            = -1 ENOENT (No such file or directory)
access("/proc/net/rose", R_OK)          = -1 ENOENT (No such file or directory)
access("/proc/net/ipx", R_OK)           = -1 ENOENT (No such file or directory)
access("/proc/net/appletalk", R_OK)     = -1 ENOENT (No such file or directory)
access("/proc/sys/net/econet", R_OK)    = -1 ENOENT (No such file or directory)
access("/proc/sys/net/ash", R_OK)       = -1 ENOENT (No such file or directory)
access("/proc/net/x25", R_OK)           = -1 ENOENT (No such file or directory)
open("/usr/share/locale/de_DE.UTF-8/LC_MESSAGES/net-tools.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/share/locale/de_DE.utf8/LC_MESSAGES/net-tools.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/share/locale/de_DE/LC_MESSAGES/net-tools.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/share/locale/de.UTF-8/LC_MESSAGES/net-tools.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/share/locale/de.utf8/LC_MESSAGES/net-tools.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/share/locale/de/LC_MESSAGES/net-tools.mo", O_RDONLY) = 6
fstat64(6, {st_mode=S_IFREG|0644, st_size=40282, ...}) = 0
mmap(NULL, 40282, PROT_READ, MAP_PRIVATE, 6, 0) = 0xf7c51000
close(6)                                = 0
open("/usr/lib/powerpc-linux-gnu/gconv/ISO8859-1.so", O_RDONLY|O_CLOEXEC) = 6
read(6, "\177ELF\1\2\1\0\0\0\0\0\0\0\0\0\0\3\0\24\0\0\0\1\0\0\5\0\0\0\0004"..., 512) = 512
fstat64(6, {st_mode=S_IFREG|0644, st_size=9548, ...}) = 0
mmap(0xfe3d000, 73756, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 6, 0) = 0xfe3d000
mprotect(0xfe3f000, 61440, PROT_NONE)   = 0
mmap(0xfe4e000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 6, 0x1000) = 0xfe4e000
close(6)                                = 0
mprotect(0xfe4e000, 4096, PROT_READ)    = 0
ioctl(4, SIOCGIFFLAGS, {ifr_name="eth0", ifr_flags=IFF_BROADCAST|IFF_MULTICAST}) = 0
ioctl(4, SIOCSIFFLAGS, {ifr_name="eth0", ???}) = -1 ENOMEM (Cannot allocate memory)
dup(2)                                  = 6
fcntl64(6, F_GETFL)                     = 0x10001 (flags O_WRONLY|O_LARGEFILE)
close(6)                                = 0
open("/usr/share/locale/de_DE.UTF-8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/share/locale/de_DE.utf8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/share/locale/de_DE/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/share/locale/de.UTF-8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/share/locale/de.utf8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/share/locale/de/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
write(2, "SIOCSIFFLAGS: Cannot allocate me"..., 37SIOCSIFFLAGS: Cannot allocate memory
) = 37
exit_group(-1)                          = ?
+++ exited with 255 +++

[P.A. Semi] Does the ethernet interface work on your Electra, Chitra, Nemo, and Athena board?

[Christian Zigotzky]

Hi all,

I have some good news for you. I was able to fix the issue with the P.A. 
Semi Ethernet. It was a problem with the new DMA handling. The patch ' 
[RFC/PATCH,v2] powerpc/iommu: Support "hybrid" iommu/direct DMA ops for 
coherent_mask < dma_mask (https://patchwork.ozlabs.org/patch/472535/)' 
is the problem.

I had patched the following files before I compiled a kernel.

arch/powerpc/Kconfig
arch/powerpc/include/asm/device.h
arch/powerpc/include/asm/dma-mapping.h
arch/powerpc/include/asm/iommu.h
arch/powerpc/kernel/dma-iommu.c
arch/powerpc/kernel/dma-swiotlb.c
arch/powerpc/kernel/dma.c
arch/powerpc/platforms/powernv/pci-ioda.c
arch/powerpc/platforms/pseries/iommu.c
arch/powerpc/sysdev/dart_iommu.c
include/asm-generic/dma-mapping-common.h

The P.A. Semi Ethernet works again with the patched kernel.

I am happy. :-)

Please fix the issue in the kernel source code.

Thanks in advance,

Christian

Re: [P.A. Semi] Does the ethernet interface work on your Electra, Chitra, Nemo, and Athena board?

[Denis Kirjanov]

On 12/7/15, Christian Zigotzky <chzigotzky@xenosoft.de> wrote:
> Hi all,
>
> I have some good news for you. I was able to fix the issue with the P.A.
> Semi Ethernet. It was a problem with the new DMA handling. The patch '
> [RFC/PATCH,v2] powerpc/iommu: Support "hybrid" iommu/direct DMA ops for
> coherent_mask < dma_mask (https://patchwork.ozlabs.org/patch/472535/)'
> is the problem.
>
> I had patched the following files before I compiled a kernel.
>
> arch/powerpc/Kconfig
> arch/powerpc/include/asm/device.h
> arch/powerpc/include/asm/dma-mapping.h
> arch/powerpc/include/asm/iommu.h
> arch/powerpc/kernel/dma-iommu.c
> arch/powerpc/kernel/dma-swiotlb.c
> arch/powerpc/kernel/dma.c
> arch/powerpc/platforms/powernv/pci-ioda.c
> arch/powerpc/platforms/pseries/iommu.c
> arch/powerpc/sysdev/dart_iommu.c
> include/asm-generic/dma-mapping-common.h
>
> The P.A. Semi Ethernet works again with the patched kernel.

Hi Ben,

Could you please take a look..

Thanks!

>
> I am happy. :-)
>
> Please fix the issue in the kernel source code.
>
> Thanks in advance,
>
> Christian
>
>
>

Re: [P.A. Semi] Does the ethernet interface work on your Electra, Chitra, Nemo, and Athena board?

[Benjamin Herrenschmidt]

On Mon, 2015-12-07 at 15:12 +0100, Christian Zigotzky wrote:
> Hi all,
> 
> I have some good news for you. I was able to fix the issue with the
> P.A. 
> Semi Ethernet. It was a problem with the new DMA handling. The patch
> ' 
> [RFC/PATCH,v2] powerpc/iommu: Support "hybrid" iommu/direct DMA ops
> for 
> coherent_mask < dma_mask (https://patchwork.ozlabs.org/patch/472535/)
> ' 
> is the problem.

Send me your .config and the full dmesg output. I can't seem to
reproduce here.

Cheers,
Ben.

> I had patched the following files before I compiled a kernel.
> 
> arch/powerpc/Kconfig
> arch/powerpc/include/asm/device.h
> arch/powerpc/include/asm/dma-mapping.h
> arch/powerpc/include/asm/iommu.h
> arch/powerpc/kernel/dma-iommu.c
> arch/powerpc/kernel/dma-swiotlb.c
> arch/powerpc/kernel/dma.c
> arch/powerpc/platforms/powernv/pci-ioda.c
> arch/powerpc/platforms/pseries/iommu.c
> arch/powerpc/sysdev/dart_iommu.c
> include/asm-generic/dma-mapping-common.h
> 
> The P.A. Semi Ethernet works again with the patched kernel.
> 
> I am happy. :-)
> 
> Please fix the issue in the kernel source code.
> 
> Thanks in advance,
> 
> Christian
> 
> 
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/linuxppc-dev

Re: [P.A. Semi] Does the ethernet interface work on your Electra, Chitra, Nemo, and Athena board?

[Denis Kirjanov]

On 11/30/15, Christian Zigotzky <chzigotzky@xenosoft.de> wrote:
> Hi All,
>
> I have tested the PA Semi Ethernet with the kernels 4.2.3 and 4.3.0
> today. With the kernel 4.2.3 it works but with the kernel 4.3.0 final it
> doesn't work.

Looking at the changes in pasemi I don't see any significant
changes to the driver so the best thing you can try is to bisect the
bad commit.

>
> After that I tested some git kernels and release candidates of 4.3.
>
> Kernel 4.3 git from Tue Sep 01, 2015 -> PA Semi Ethernet works
> Kernel 4.3 git from Wed Sep 02, 2015 -> PA Semi Ethernet works
> Kernel 4.3 git from Thu Sep 03, 2015 -> PA Semi Ethernet works
> Kernel 4.3 git from Fri Sep 04, 2015 -> PA Semi Ethernet doesn't work
> (Merge tag 'powerpc-4.3-1':
> https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=ff474e8ca8547d09cb82ebab56d4c96f9eea01ce)
> Kernel 4.3 git from Sat Sep 05, 2015 -> PA Semi Ethernet doesn't work
> Kernel 4.3 git from Mon Sep 07, 2015 -> PA Semi Ethernet doesn't work
> Kernel 4.3 git from Wed Sep 09, 2015 -> PA Semi Ethernet doesn't work
> Kernel 4.3 git from Fri Sep 11, 2015 -> PA Semi Ethernet doesn't work
> Kernel 4.3 RC1 from Sun Sep 13, 2015 -> PA Semi Ethernet doesn't work
> Kernel 4.3 RC2 from Mon Sep 21, 2015 -> PA Semi Ethernet doesn't work
>
> The problematic commit must be between Thu Sep 03, 2015 at 09:37 AM (UTC
> +2) and Fri Sep 04, 2015 at 7:38 PM (UTC +2) in the linux git.
>
> Linux git: Between
> https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/log/?ofs=15500
>
> and
> https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/log/?ofs=15200.
>
> Maybe
> https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=ff474e8ca8547d09cb82ebab56d4c96f9eea01ce.
>
> Cheers,
>
> Christian
>
> On 30 November 2015 at 10:48 AM, Christian Zigotzky wrote:
>> Hi Denis,
>>
>> Thank you for your answer. Sorry because of my description.
>>
>> Yes, the driver probe function finds the device.
>>
>> With kernel 4.4-rc3:
>>
>> dmesg | grep -i eth0
>>
>> [ 2.297473] eth0: PA Semi GMAC: intf 5, hw addr 02:00:e0:0a:30:00
>>
>> dhclient eth0
>>
>> RTNETLINK answers: Cannot allocate memory
>>
>> With kernel 4.1.13:
>>
>> dmesg | grep -i eth0
>>
>> [ 2.328115] eth0: PA Semi GMAC: intf 5, hw addr 02:00:e0:0a:30:00
>> [ 37.130466] eth0: Link is up at 100 Mbps, full duplex.
>>
>> Cheers,
>>
>> Christian
>>
>> On 30 November 2015 at 09:37 AM, Denis Kirjanov wrote:
>>> On 11/29/15, Christian Zigotzky <chzigotzky@xenosoft.de> wrote:
>>>> Hi All,
>>>>
>>>> Does the ethernet interface on your Electra, Chitra, Nemo, and Athena
>>>> board work with the release candidates of the kernel 4.4? Unfortunately
>>>> the P.A. Semi ethernet doesn't work on our Nemo boards with the release
>>>> candidates of the kernel 4.4. We have set the following entries in the
>>>> kernel config:
>>>>
>>>> CONFIG_NET_VENDOR_PASEMI=y
>>>> CONFIG_PASEMI_MAC=y
>>>>
>>>> Could you please test the P.A. Semi ethernet on your P.A. Semi boards?
>>> It's not clear from your descriptions what is not working. Does the
>>> driver probe function find  a device? Does the interface show up in
>>> the kernel? Can it send/receive packets?
>>>
>>> Also please CC netdev.
>>>
>>> Thanks.
>>>
>>>> Thanks in advance,
>>>>
>>>> Christian
>>>> _______________________________________________
>>>> Linuxppc-dev mailing list
>>>> Linuxppc-dev@lists.ozlabs.org
>>>> https://lists.ozlabs.org/listinfo/linuxppc-dev
>>
>
>