netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Edward Cree <ecree@solarflare.com>
To: David Miller <davem@davemloft.net>
Cc: <netdev@vger.kernel.org>, <linux-net-drivers@solarflare.com>,
	<tom@herbertland.com>, <alexander.duyck@gmail.com>
Subject: [PATCH net-next 4/8] net: vxlan: enable local checksum offload
Date: Fri, 8 Jan 2016 19:45:51 +0000	[thread overview]
Message-ID: <569011EF.8060602@solarflare.com> (raw)
In-Reply-To: <56901197.8040808@solarflare.com>

Signed-off-by: Edward Cree <ecree@solarflare.com>
---
 drivers/net/vxlan.c | 18 ++++++------------
 1 file changed, 6 insertions(+), 12 deletions(-)

diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c
index 6369a57..d3509a1 100644
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -1708,10 +1708,8 @@ static int vxlan6_xmit_skb(struct dst_entry *dst, struct sock *sk,
 		if (csum_start <= VXLAN_MAX_REMCSUM_START &&
 		    !(csum_start & VXLAN_RCO_SHIFT_MASK) &&
 		    (skb->csum_offset == offsetof(struct udphdr, check) ||
-		     skb->csum_offset == offsetof(struct tcphdr, check))) {
-			udp_sum = false;
+		     skb->csum_offset == offsetof(struct tcphdr, check)))
 			type |= SKB_GSO_TUNNEL_REMCSUM;
-		}
 	}
 
 	skb_scrub_packet(skb, xnet);
@@ -1733,7 +1731,7 @@ static int vxlan6_xmit_skb(struct dst_entry *dst, struct sock *sk,
 		goto err;
 	}
 
-	skb = iptunnel_handle_offloads(skb, udp_sum, type);
+	skb = iptunnel_handle_offloads(skb, false, type);
 	if (IS_ERR(skb)) {
 		err = -EINVAL;
 		goto err;
@@ -1765,8 +1763,7 @@ static int vxlan6_xmit_skb(struct dst_entry *dst, struct sock *sk,
 	skb_set_inner_protocol(skb, htons(ETH_P_TEB));
 
 	udp_tunnel6_xmit_skb(dst, sk, skb, dev, saddr, daddr, prio,
-			     ttl, src_port, dst_port,
-			     !!(vxflags & VXLAN_F_UDP_ZERO_CSUM6_TX));
+			     ttl, src_port, dst_port, !udp_sum);
 	return 0;
 err:
 	dst_release(dst);
@@ -1793,10 +1790,8 @@ static int vxlan_xmit_skb(struct rtable *rt, struct sock *sk, struct sk_buff *sk
 		if (csum_start <= VXLAN_MAX_REMCSUM_START &&
 		    !(csum_start & VXLAN_RCO_SHIFT_MASK) &&
 		    (skb->csum_offset == offsetof(struct udphdr, check) ||
-		     skb->csum_offset == offsetof(struct tcphdr, check))) {
-			udp_sum = false;
+		     skb->csum_offset == offsetof(struct tcphdr, check)))
 			type |= SKB_GSO_TUNNEL_REMCSUM;
-		}
 	}
 
 	min_headroom = LL_RESERVED_SPACE(rt->dst.dev) + rt->dst.header_len
@@ -1814,7 +1809,7 @@ static int vxlan_xmit_skb(struct rtable *rt, struct sock *sk, struct sk_buff *sk
 	if (WARN_ON(!skb))
 		return -ENOMEM;
 
-	skb = iptunnel_handle_offloads(skb, udp_sum, type);
+	skb = iptunnel_handle_offloads(skb, false, type);
 	if (IS_ERR(skb))
 		return PTR_ERR(skb);
 
@@ -1844,8 +1839,7 @@ static int vxlan_xmit_skb(struct rtable *rt, struct sock *sk, struct sk_buff *sk
 	skb_set_inner_protocol(skb, htons(ETH_P_TEB));
 
 	return udp_tunnel_xmit_skb(rt, sk, skb, src, dst, tos,
-				   ttl, df, src_port, dst_port, xnet,
-				   !(vxflags & VXLAN_F_UDP_CSUM));
+				   ttl, df, src_port, dst_port, xnet, !udp_sum);
 }
 
 /* Bypass encapsulation if the destination is local */

  parent reply	other threads:[~2016-01-08 19:46 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-08 19:44 [PATCH v3 net-next 0/8] Local Checksum Offload Edward Cree
2016-01-08 19:45 ` [PATCH net-next 1/8] net: local checksum offload for encapsulation Edward Cree
2016-01-28  7:04   ` Zang MingJie
2016-01-28  9:00     ` Alexander Duyck
2016-01-28 17:09       ` Tom Herbert
2016-01-08 19:45 ` [PATCH net-next 2/8] net: udp: always set up for CHECKSUM_PARTIAL offload Edward Cree
2016-01-08 19:45 ` [PATCH net-next 3/8] net: enable LCO for udp_tunnel_handle_offloads() users Edward Cree
2016-01-08 19:45 ` Edward Cree [this message]
2016-01-08 19:46 ` [PATCH net-next 5/8] fou: enable LCO in FOU and GUE Edward Cree
2016-01-08 19:47 ` [PATCH net-next 6/8] net: gre: Implement LCO for GRE over IPv4 Edward Cree
2016-01-11 10:09   ` David Laight
2016-01-11 13:21     ` Edward Cree
2016-01-11 18:39       ` Alexander Duyck
2016-01-11 19:02         ` Edward Cree
2016-01-20 19:11         ` Rustad, Mark D
2016-01-20 19:35           ` Alexander Duyck
2016-01-20 19:58             ` Tom Herbert
2016-01-20 21:13               ` Alexander Duyck
2016-01-20 23:34                 ` Rustad, Mark D
2016-01-08 19:47 ` [PATCH net-next 7/8] net: ip_tunnel: remove 'csum_help' argument to iptunnel_handle_offloads Edward Cree
2016-01-09  0:35   ` Alexander Duyck
2016-01-09  0:44     ` Tom Herbert
2016-01-09  2:05       ` Alexander Duyck
2016-01-09  3:00         ` Tom Herbert
2016-01-09  7:59           ` Alexander Duyck
2016-01-11 13:24         ` Edward Cree
2016-01-11 16:39           ` Alexander Duyck
2016-01-11 17:31             ` Edward Cree
2016-01-11 18:15               ` Alexander Duyck
2016-01-11 19:03                 ` Edward Cree
2016-01-11 21:00                   ` Alexander Duyck
2016-01-08 19:47 ` [PATCH net-next 8/8] Documentation/networking: add checksum-offloads.txt to explain LCO Edward Cree
  -- strict thread matches above, loose matches on Subject: below --
2016-02-05 20:39 [PATCH v4 net-next 0/8] Local Checksum Offload Edward Cree
2016-02-05 20:42 ` [PATCH net-next 4/8] net: vxlan: enable local checksum offload Edward Cree

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=569011EF.8060602@solarflare.com \
    --to=ecree@solarflare.com \
    --cc=alexander.duyck@gmail.com \
    --cc=davem@davemloft.net \
    --cc=linux-net-drivers@solarflare.com \
    --cc=netdev@vger.kernel.org \
    --cc=tom@herbertland.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).