From: Marc Kleine-Budde <mkl@pengutronix.de>
To: Marek Vasut <marex@denx.de>
Cc: netdev@vger.kernel.org, Oliver Hartkopp <socketcan@hartkopp.net>,
Mark Rutland <mark.rutland@arm.com>,
Wolfgang Grandegger <wg@grandegger.com>
Subject: Re: [PATCH V3 5/5] net: can: ifi: Add IFI CANFD IP support
Date: Wed, 20 Jan 2016 15:46:58 +0100 [thread overview]
Message-ID: <569F9DE2.10405@pengutronix.de> (raw)
In-Reply-To: <201601201541.53246.marex@denx.de>
[-- Attachment #1: Type: text/plain, Size: 3083 bytes --]
On 01/20/2016 03:41 PM, Marek Vasut wrote:
> On Wednesday, January 20, 2016 at 03:39:51 PM, Marc Kleine-Budde wrote:
>> On 01/20/2016 03:33 PM, Marek Vasut wrote:
>>> The patch adds support for IFI CAN/FD controller [1]. This driver
>>> currently supports sending and receiving both standard CAN and new
>>> CAN/FD frames. Both ISO and BOSCH variant of CAN/FD is supported.
>>>
>>> [1] http://www.ifi-pld.de/IP/CANFD/canfd.html
>>>
>>> Signed-off-by: Marek Vasut <marex@denx.de>
>>> Cc: Marc Kleine-Budde <mkl@pengutronix.de>
>>> Cc: Mark Rutland <mark.rutland@arm.com>
>>> Cc: Oliver Hartkopp <socketcan@hartkopp.net>
>>> Cc: Wolfgang Grandegger <wg@grandegger.com>
>>> ---
>>> V2: - Move request_irq()/free_irq() into
>>> ifi_canfd_open()/ifi_canfd_close()
>>>
>>> just like other drivers do it to prevent crash when reloading
>>> module.
>>>
>>> - Fix Woverflow complains on x86_64 and itanium, exactly the same way
>>>
>>> as in commit dec23dca5a9ca4b9eb2fb66926f567889028b904 .
>>>
>>> V3: - Hopefully fix all problems with BIT(31) by adding more u32 casts.
>>>
>>> - Drop struct device from struct ifi_canfd_priv .
>>>
>>> NOTE: The driver is surprisingly similar to m_can, but the register
>>>
>>> layout of the IFI core is completely different, so it's clear
>>> that those are two different IP cores.
>>>
>>> ---
>
> [...]
>
> Hi,
>
>>> +static irqreturn_t ifi_canfd_isr(int irq, void *dev_id)
>>> +{
>>> + struct net_device *ndev = (struct net_device *)dev_id;
>>> + struct ifi_canfd_priv *priv = netdev_priv(ndev);
>>> + struct net_device_stats *stats = &ndev->stats;
>>> + const u32 rx_irq_mask = IFI_CANFD_INTERRUPT_RXFIFO_NEMPTY |
>>> + IFI_CANFD_INTERRUPT_RXFIFO_NEMPTY_PER;
>>> + const u32 tx_irq_mask = IFI_CANFD_INTERRUPT_TXFIFO_EMPTY |
>>> + IFI_CANFD_INTERRUPT_TXFIFO_REMOVE;
>>> + const u32 clr_irq_mask = (u32)(~(IFI_CANFD_INTERRUPT_SET_IRQ |
>>> + IFI_CANFD_INTERRUPT_ERROR_WARNING));
>>
>> I've squashed:
>>>> - const u32 clr_irq_mask = (u32)(~(IFI_CANFD_INTERRUPT_SET_IRQ |
>>>> -
>>>> IFI_CANFD_INTERRUPT_ERROR_WARNING)); + const u32 clr_irq_mask =
>>>> ~(IFI_CANFD_INTERRUPT_SET_IRQ | +
>>>> IFI_CANFD_INTERRUPT_ERROR_WARNING);
>>
>> and the driver compiles without warnings.
>
> It doesn't , try with x86_64_defconfig, it will complain with -Woverflow
> on gcc 4.9 or newer. That's what the kernel robot complained about in V1
> of the patch too.
Doh! Right, let's try this:
>> -#define IFI_CANFD_INTERRUPT_ERROR_WARNING BIT(1)
>> +#define IFI_CANFD_INTERRUPT_ERROR_WARNING ((u32)BIT(1))
> I'd be happy to be proven wrong though.
/me too
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 455 bytes --]
next prev parent reply other threads:[~2016-01-20 14:47 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-11 18:47 [PATCH 1/5] net: can: Sort the Kconfig includes Marek Vasut
2016-01-11 18:48 ` [PATCH 2/5] net: can: Sort the Makefile Marek Vasut
2016-01-11 18:48 ` [PATCH 3/5] of: Add vendor prefix for I/F/I Marek Vasut
2016-01-11 18:48 ` [PATCH 4/5] net: can: ifi: Add DT bindings for ifi,canfd Marek Vasut
2016-01-11 18:48 ` [PATCH 5/5] net: can: ifi: Add IFI CANFD IP support Marek Vasut
2016-01-11 19:29 ` kbuild test robot
2016-01-11 19:33 ` Marek Vasut
2016-01-12 11:06 ` kbuild test robot
2016-01-12 23:59 ` [PATCH V2 " Marek Vasut
2016-01-20 10:39 ` Marc Kleine-Budde
2016-01-20 10:54 ` Marc Kleine-Budde
2016-01-20 12:58 ` Marek Vasut
2016-01-20 14:06 ` Marc Kleine-Budde
2016-01-20 14:25 ` Marek Vasut
2016-01-23 0:11 ` Rustad, Mark D
2016-01-20 14:33 ` [PATCH V3 " Marek Vasut
2016-01-20 14:39 ` Marc Kleine-Budde
2016-01-20 14:41 ` Marek Vasut
2016-01-20 14:46 ` Marc Kleine-Budde [this message]
2016-01-20 15:03 ` Marek Vasut
2016-01-20 15:09 ` Marc Kleine-Budde
2016-01-20 15:40 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=569F9DE2.10405@pengutronix.de \
--to=mkl@pengutronix.de \
--cc=marex@denx.de \
--cc=mark.rutland@arm.com \
--cc=netdev@vger.kernel.org \
--cc=socketcan@hartkopp.net \
--cc=wg@grandegger.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).