From mboxrd@z Thu Jan 1 00:00:00 1970 From: Giuseppe CAVALLARO Subject: Re: [PATCH 0/4] Add Ethernet support on STM32F429 Date: Wed, 3 Feb 2016 16:21:39 +0100 Message-ID: <56B21B03.507@st.com> References: <1454511275-9791-1-git-send-email-alexandre.torgue@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset="ISO-8859-1"; format=flowed Content-Transfer-Encoding: 7bit Cc: , To: Alexandre TORGUE , Maxime Coquelin , Return-path: Received: from mx07-00178001.pphosted.com ([62.209.51.94]:14095 "EHLO mx07-00178001.pphosted.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751901AbcBCPWM (ORCPT ); Wed, 3 Feb 2016 10:22:12 -0500 In-Reply-To: <1454511275-9791-1-git-send-email-alexandre.torgue@gmail.com> Sender: netdev-owner@vger.kernel.org List-ID: Hello Alex On 2/3/2016 3:54 PM, Alexandre TORGUE wrote: > STM32F429 Chip embeds a Synopsys 3.50a MAC IP. > This series: > -enhance current stmmac driver to control it (code already available) and > adds basic glue for STM32F429 chip. > -Enable basic Net config in kernel. > > Note that DT patches are not present because STM32 pinctrl code is not > yet avalaible. patches look ok for me Acked-by: Giuseppe Cavallaro > > Regards > > Alexandre > > Alexandre TORGUE (4): > net: ethernet: dwmac: add Ethernet glue logic for stm32 chip > Documentation: Bindings: Add STM32 DWMAC glue > net: ethernet: stmmac: add support of Synopsys 3.50a MAC IP > ARM: STM32: Enable Ethernet in stm32_defconfig > > .../devicetree/bindings/net/stm32-dwmac.txt | 41 +++++ > arch/arm/configs/stm32_defconfig | 9 ++ > drivers/net/ethernet/stmicro/stmmac/Kconfig | 12 ++ > drivers/net/ethernet/stmicro/stmmac/Makefile | 1 + > drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c | 177 +++++++++++++++++++++ > .../net/ethernet/stmicro/stmmac/stmmac_platform.c | 1 + > 6 files changed, 241 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/stm32-dwmac.txt > create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c >