Re: [net-next] igb: assume MSI-X interrupts during initialization

[Stefan Assmann <sassmann@kpanic.de>]

On 02/05/2016 10:24 PM, Laine Stump wrote:
> Stefan,
>
> I have an AMD 990FX system with an Intel 82576 card that could not
> successfully boot with any kernel starting somewhere prior to 4.2, but
> does boot properly in 4.4+. After a lot of time bisecting, I found that
> this patch, when applied to kernel 4.3.0, solves the problem (applying
> to 4.2.0 has no effect, so there's some other patch/patches in the
> interim that were also part of the fix).
>
> Since I don't know the details of proposing this patch for 4.3 stable,
> would it be possible for you to do that?
>
> Thanks!

Hi Laine,

I took a quick look at 4.3 and the patch you mention should be
sufficient. For 4.2 I'll have to take a closer look. I'm currently
traveling but going to get back to you early next week.

I'd like double check things before taking any action.

Thanks!

   Stefan

> The full saga of my problem and investigaton is here:
>
> https://www.mail-archive.com/iommu@lists.linux-foundation.org/msg10687.html
>
>
> On 09/17/2015 08:46 AM, Stefan Assmann wrote:
>> In igb_sw_init() the sequence of calls was changed from
>> igb_init_queue_configuration()
>> igb_init_interrupt_scheme()
>> igb_probe_vfs()
>> to
>> igb_probe_vfs()
>> igb_init_queue_configuration()
>> igb_init_interrupt_scheme()
>>
>> This results in adapter->flags not having the IGB_FLAG_HAS_MSIX bit set
>> during igb_probe_vfs()->igb_enable_sriov(). Therefore SR-IOV does not
>> get enabled properly and we run into a NULL pointer if the max_vfs
>> module parameter is specified (adapter->vf_data does not get allocated,
>> crash on accessing the structure).
>>
>> [    7.419348] BUG: unable to handle kernel NULL pointer dereference
>> at 0000000000000048
>> [    7.419367] IP: [<ffffffffa02161c6>] igb_reset+0xe6/0x5d0 [igb]
>> [    7.419370] PGD 0
>> [    7.419373] Oops: 0002 [#1] SMP
>> [    7.419381] Modules linked in: ahci(+) libahci igb(+) i40e(+) vxlan
>> ip6_udp_tunnel udp_tunnel megaraid_sas(+) ixgbe(+) mdio
>> [    7.419385] CPU: 0 PID: 4 Comm: kworker/0:0 Not tainted 4.2.0+ #153
>> [    7.419387] Hardware name: Dell Inc. PowerEdge R720/0C4Y3R, BIOS
>> 1.6.0 03/07/2013
>> [...]
>> [    7.419431] Call Trace:
>> [    7.419442]  [<ffffffffa0217236>] igb_probe+0x8b6/0x1340 [igb]
>> [    7.419447]  [<ffffffff814c7f15>] local_pci_probe+0x45/0xa0
>>
>> Prevent this by setting the IGB_FLAG_HAS_MSIX bit before calling
>> igb_probe_vfs(). The real interrupt capabilities will be checked during
>> igb_init_interrupt_scheme() so this is safe to do.
>>
>> Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
>> ---
>>   drivers/net/ethernet/intel/igb/igb_main.c | 3 +++
>>   1 file changed, 3 insertions(+)
>>
>> diff --git a/drivers/net/ethernet/intel/igb/igb_main.c
>> b/drivers/net/ethernet/intel/igb/igb_main.c
>> index e174fbb..ba019fc 100644
>> --- a/drivers/net/ethernet/intel/igb/igb_main.c
>> +++ b/drivers/net/ethernet/intel/igb/igb_main.c
>> @@ -2986,6 +2986,9 @@ static int igb_sw_init(struct igb_adapter *adapter)
>>       }
>>   #endif /* CONFIG_PCI_IOV */
>>
>> +    /* Assume MSI-X interrupts, will be checked during IRQ allocation */
>> +    adapter->flags |= IGB_FLAG_HAS_MSIX;
>> +
>>       igb_probe_vfs(adapter);
>>
>>       igb_init_queue_configuration(adapter);
>>
>