* [PATCH net v4] r8169: Add EEPROM support and disable MWI on pci express.
@ 2016-02-07 17:38 Corcodel Marian
2016-02-07 18:10 ` Sergei Shtylyov
0 siblings, 1 reply; 4+ messages in thread
From: Corcodel Marian @ 2016-02-07 17:38 UTC (permalink / raw)
To: netdev; +Cc: Corcodel Marian
On chip with external eeprom ASPM settings is loaded from eeprom and
on pci express interface not support MWI.
Signed-off-by: Corcodel Marian <asd@marian1000.go.ro>
---
drivers/net/ethernet/realtek/r8169.c | 22 ++++++++++++++--------
1 file changed, 14 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index 1d119a6..bebd550 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -733,6 +733,7 @@ enum features {
RTL_FEATURE_WOL = (1 << 0),
RTL_FEATURE_MSI = (1 << 1),
RTL_FEATURE_GMII = (1 << 2),
+ RTL_FEATURE_EEPROM = (1 << 3),
};
struct rtl8169_counters {
@@ -4372,7 +4373,8 @@ static void rtl8169_release_board(struct pci_dev *pdev, struct net_device *dev,
{
iounmap(ioaddr);
pci_release_regions(pdev);
- pci_clear_mwi(pdev);
+ if (!pci_is_pcie(pdev))
+ pci_clear_mwi(pdev);
pci_disable_device(pdev);
free_netdev(dev);
}
@@ -8042,7 +8044,7 @@ static const struct rtl_cfg_info {
.align = 8,
.event_slow = SYSErr | LinkChg | RxOverflow | RxFIFOOver |
PCSTimeout | SWInt | TxDescUnavail,
- .features = RTL_FEATURE_MSI,
+ .features = RTL_FEATURE_MSI | RTL_FEATURE_EEPROM,
.default_ver = RTL_GIGA_MAC_VER_13,
}
};
@@ -8151,6 +8153,7 @@ static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
const struct rtl_cfg_info *cfg = rtl_cfg_infos + ent->driver_data;
const unsigned int region = cfg->region;
+ unsigned features = cfg->features;
struct rtl8169_private *tp;
struct mii_if_info *mii;
struct net_device *dev;
@@ -8186,8 +8189,10 @@ static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
/* disable ASPM completely as that cause random device stop working
* problems as well as full system hangs for some PCIe devices users */
- pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 |
- PCIE_LINK_STATE_CLKPM);
+ if (!(features & RTL_FEATURE_EEPROM))
+ pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S |
+ PCIE_LINK_STATE_L1 |
+ PCIE_LINK_STATE_CLKPM);
mdelay(RTL8169_EE_TIMEOUT);
/* enable device (incl. PCI PM wakeup and hotplug setup) */
@@ -8196,10 +8201,10 @@ static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
netif_err(tp, probe, dev, "enable failure\n");
goto err_out_free_dev_1;
}
-
- if (pci_set_mwi(pdev) < 0)
+ if (!pci_is_pcie(pdev)) {
+ if (pci_set_mwi(pdev) < 0)
netif_info(tp, probe, dev, "Mem-Wr-Inval unavailable\n");
-
+ }
/* make sure PCI base addr 1 is MMIO */
if (!(pci_resource_flags(pdev, region) & IORESOURCE_MEM)) {
netif_err(tp, probe, dev,
@@ -8462,7 +8467,8 @@ err_out_msi_4:
err_out_free_res_3:
pci_release_regions(pdev);
err_out_mwi_2:
- pci_clear_mwi(pdev);
+ if (!pci_is_pcie(pdev))
+ pci_clear_mwi(pdev);
pci_disable_device(pdev);
err_out_free_dev_1:
free_netdev(dev);
--
2.5.0
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [PATCH net v4] r8169: Add EEPROM support and disable MWI on pci express.
2016-02-07 17:38 [PATCH net v4] r8169: Add EEPROM support and disable MWI on pci express Corcodel Marian
@ 2016-02-07 18:10 ` Sergei Shtylyov
2016-02-07 18:40 ` Corcodel Marian
0 siblings, 1 reply; 4+ messages in thread
From: Sergei Shtylyov @ 2016-02-07 18:10 UTC (permalink / raw)
To: Corcodel Marian, netdev
Hello.
On 02/07/2016 08:38 PM, Corcodel Marian wrote:
> On chip with external eeprom ASPM settings is loaded from eeprom and
> on pci express interface not support MWI.
Does not support.
>
> Signed-off-by: Corcodel Marian <asd@marian1000.go.ro>
> ---
> drivers/net/ethernet/realtek/r8169.c | 22 ++++++++++++++--------
> 1 file changed, 14 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
> index 1d119a6..bebd550 100644
> --- a/drivers/net/ethernet/realtek/r8169.c
> +++ b/drivers/net/ethernet/realtek/r8169.c
[...]
> @@ -4372,7 +4373,8 @@ static void rtl8169_release_board(struct pci_dev *pdev, struct net_device *dev,
> {
> iounmap(ioaddr);
> pci_release_regions(pdev);
> - pci_clear_mwi(pdev);
> + if (!pci_is_pcie(pdev))
> + pci_clear_mwi(pdev);
Please indent with tab, not space.
> pci_disable_device(pdev);
> free_netdev(dev);
> }
> @@ -8042,7 +8044,7 @@ static const struct rtl_cfg_info {
> .align = 8,
> .event_slow = SYSErr | LinkChg | RxOverflow | RxFIFOOver |
> PCSTimeout | SWInt | TxDescUnavail,
> - .features = RTL_FEATURE_MSI,
> + .features = RTL_FEATURE_MSI | RTL_FEATURE_EEPROM,
> .default_ver = RTL_GIGA_MAC_VER_13,
> }
> };
> @@ -8151,6 +8153,7 @@ static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
> {
> const struct rtl_cfg_info *cfg = rtl_cfg_infos + ent->driver_data;
> const unsigned int region = cfg->region;
> + unsigned features = cfg->features;
Not sure you need this variable.
> struct rtl8169_private *tp;
> struct mii_if_info *mii;
> struct net_device *dev;
> @@ -8186,8 +8189,10 @@ static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
>
> /* disable ASPM completely as that cause random device stop working
> * problems as well as full system hangs for some PCIe devices users */
> - pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 |
> - PCIE_LINK_STATE_CLKPM);
> + if (!(features & RTL_FEATURE_EEPROM))
> + pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S |
> + PCIE_LINK_STATE_L1 |
> + PCIE_LINK_STATE_CLKPM);
The continuation likes should start under 'pdev', that's a style used by
the networking code.
>
> mdelay(RTL8169_EE_TIMEOUT);
> /* enable device (incl. PCI PM wakeup and hotplug setup) */
> @@ -8196,10 +8201,10 @@ static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
> netif_err(tp, probe, dev, "enable failure\n");
> goto err_out_free_dev_1;
> }
> -
> - if (pci_set_mwi(pdev) < 0)
> + if (!pci_is_pcie(pdev)) {
> + if (pci_set_mwi(pdev) < 0)
Please indent with tab, not space.
> netif_info(tp, probe, dev, "Mem-Wr-Inval unavailable\n");
> -
> + }
> /* make sure PCI base addr 1 is MMIO */
> if (!(pci_resource_flags(pdev, region) & IORESOURCE_MEM)) {
> netif_err(tp, probe, dev,
> @@ -8462,7 +8467,8 @@ err_out_msi_4:
> err_out_free_res_3:
> pci_release_regions(pdev);
> err_out_mwi_2:
> - pci_clear_mwi(pdev);
> + if (!pci_is_pcie(pdev))
> + pci_clear_mwi(pdev);
Please indent properly.
[...]
MBR, Sergei
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH net v4] r8169: Add EEPROM support and disable MWI on pci express.
2016-02-07 18:10 ` Sergei Shtylyov
@ 2016-02-07 18:40 ` Corcodel Marian
2016-02-07 18:48 ` Sergei Shtylyov
0 siblings, 1 reply; 4+ messages in thread
From: Corcodel Marian @ 2016-02-07 18:40 UTC (permalink / raw)
To: Sergei Shtylyov; +Cc: netdev
On Sun, 2016-02-07 at 21:10 +0300, Sergei Shtylyov wrote:
> Hello.
>
> On 02/07/2016 08:38 PM, Corcodel Marian wrote:
>
> > On chip with external eeprom ASPM settings is loaded from eeprom
> > and
> > on pci express interface not support MWI.
>
> Does not support.
>
> >
> > Signed-off-by: Corcodel Marian <asd@marian1000.go.ro>
> > ---
> > drivers/net/ethernet/realtek/r8169.c | 22 ++++++++++++++--------
> > 1 file changed, 14 insertions(+), 8 deletions(-)
> >
> > diff --git a/drivers/net/ethernet/realtek/r8169.c
> > b/drivers/net/ethernet/realtek/r8169.c
> > index 1d119a6..bebd550 100644
> > --- a/drivers/net/ethernet/realtek/r8169.c
> > +++ b/drivers/net/ethernet/realtek/r8169.c
> [...]
> > @@ -4372,7 +4373,8 @@ static void rtl8169_release_board(struct
> > pci_dev *pdev, struct net_device *dev,
> > {
> > iounmap(ioaddr);
> > pci_release_regions(pdev);
> > - pci_clear_mwi(pdev);
> > + if (!pci_is_pcie(pdev))
> > + pci_clear_mwi(pdev);
>
> Please indent with tab, not space.
>
> > pci_disable_device(pdev);
> > free_netdev(dev);
> > }
> > @@ -8042,7 +8044,7 @@ static const struct rtl_cfg_info {
> > .align = 8,
> > .event_slow = SYSErr | LinkChg |
> > RxOverflow | RxFIFOOver |
> > PCSTimeout | SWInt |
> > TxDescUnavail,
> > - .features = RTL_FEATURE_MSI,
> > + .features = RTL_FEATURE_MSI |
> > RTL_FEATURE_EEPROM,
> > .default_ver = RTL_GIGA_MAC_VER_13,
> > }
> > };
> > @@ -8151,6 +8153,7 @@ static int rtl_init_one(struct pci_dev *pdev,
> > const struct pci_device_id *ent)
> > {
> > const struct rtl_cfg_info *cfg = rtl_cfg_infos + ent
> > ->driver_data;
> > const unsigned int region = cfg->region;
> > + unsigned features = cfg->features;
>
> Not sure you need this variable.
>
> > struct rtl8169_private *tp;
> > struct mii_if_info *mii;
> > struct net_device *dev;
> > @@ -8186,8 +8189,10 @@ static int rtl_init_one(struct pci_dev
> > *pdev, const struct pci_device_id *ent)
> >
> > /* disable ASPM completely as that cause random device
> > stop working
> > * problems as well as full system hangs for some PCIe
> > devices users */
> > - pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S |
> > PCIE_LINK_STATE_L1 |
> > - PCIE_LINK_STATE_CLKPM);
> > + if (!(features & RTL_FEATURE_EEPROM))
> > + pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S |
> > + PCIE_LINK_STATE_L1 |
> > + PCIE_LINK_STATE_CLKPM
> > );
>
> The continuation likes should start under 'pdev', that's a style
> used by
> the networking code.
>
> >
> > mdelay(RTL8169_EE_TIMEOUT);
> > /* enable device (incl. PCI PM wakeup and hotplug setup)
> > */
> > @@ -8196,10 +8201,10 @@ static int rtl_init_one(struct pci_dev
> > *pdev, const struct pci_device_id *ent)
> > netif_err(tp, probe, dev, "enable failure\n");
> > goto err_out_free_dev_1;
> > }
> > -
> > - if (pci_set_mwi(pdev) < 0)
> > + if (!pci_is_pcie(pdev)) {
> > + if (pci_set_mwi(pdev) < 0)
>
> Please indent with tab, not space.
>
> > netif_info(tp, probe, dev, "Mem-Wr-Inval
> > unavailable\n");
> > -
> > + }
> > /* make sure PCI base addr 1 is MMIO */
> > if (!(pci_resource_flags(pdev, region) & IORESOURCE_MEM))
> > {
> > netif_err(tp, probe, dev,
> > @@ -8462,7 +8467,8 @@ err_out_msi_4:
> > err_out_free_res_3:
> > pci_release_regions(pdev);
> > err_out_mwi_2:
> > - pci_clear_mwi(pdev);
> > + if (!pci_is_pcie(pdev))
> > + pci_clear_mwi(pdev);
>
> Please indent properly.
>
> [...]
>
> MBR, Sergei
>
Hi i have one question, this patch can be reused or need to create new
one.
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH net v4] r8169: Add EEPROM support and disable MWI on pci express.
2016-02-07 18:40 ` Corcodel Marian
@ 2016-02-07 18:48 ` Sergei Shtylyov
0 siblings, 0 replies; 4+ messages in thread
From: Sergei Shtylyov @ 2016-02-07 18:48 UTC (permalink / raw)
To: Corcodel Marian; +Cc: netdev
On 02/07/2016 09:40 PM, Corcodel Marian wrote:
[No need to qulate the full patch if you ask a question unrelated to the
comments.]
> Hi i have one question, this patch can be reused or need to create new
> one.
In case you were asking whether you should repost the updated patch in the
same thread, the answer is "no". OItgherwise I fail to understand. :-)
MBR, Sergei
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2016-02-07 18:48 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-02-07 17:38 [PATCH net v4] r8169: Add EEPROM support and disable MWI on pci express Corcodel Marian
2016-02-07 18:10 ` Sergei Shtylyov
2016-02-07 18:40 ` Corcodel Marian
2016-02-07 18:48 ` Sergei Shtylyov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).