Re: [PATCH v2 6/6] dt-bindings: net: ks8995: add bindings documentation for ks8995

[Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>]

Hello.

On 02/08/2016 08:35 PM, Helmut Buchsbaum wrote:

> Signed-off-by: Helmut Buchsbaum <helmut.buchsbaum@gmail.com>
> ---
>   .../devicetree/bindings/net/micrel-ks8995.txt        | 20 ++++++++++++++++++++
>   1 file changed, 20 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/net/micrel-ks8995.txt
>
> diff --git a/Documentation/devicetree/bindings/net/micrel-ks8995.txt b/Documentation/devicetree/bindings/net/micrel-ks8995.txt
> new file mode 100644
> index 0000000..7f11ca6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/micrel-ks8995.txt
> @@ -0,0 +1,20 @@
> +Micrel KS8995 SPI controlled Ethernet Switch families
> +
> +Required properties (according to spi-bus.txt):
> +- compatible: either "micrel,ks8995", "micrel,ksz8864" or "micrel,ksz8795"
> +
> +Optional properties:
> +- reset-gpios : phandle of gpio that will be used to reset chip during probe
> +
> +Example:
> +
> +spi-master {
> +	...
> +	ksz8795 {

    ePAPR tells to name the nodes generically, according to their function.

> +		compatible = "micrel,ksz8795";
> +
> +		reg = <0>;
> +		spi-max-frequency = <50000000>;
> +		reset-gpios = <&gpio0 46 1>;
> +	};
> +};

MBR, Sergei