From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sudip Mukherjee Subject: Re: [PATCH] net: phy: spi_ks8995: add dependency on GPIO Date: Sat, 13 Feb 2016 19:35:40 +0530 Message-ID: <56BF3834.2090708@gmail.com> References: <1455272306-30251-1-git-send-email-sudipm.mukherjee@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 7bit Cc: Florian Fainelli , "linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org" , kernel-testers-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, "netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org" , "David S. Miller" , Helmut Buchsbaum To: Geert Uytterhoeven Return-path: In-Reply-To: Sender: kernel-testers-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: netdev.vger.kernel.org On Saturday 13 February 2016 03:42 PM, Geert Uytterhoeven wrote: > On Fri, Feb 12, 2016 at 11:18 AM, Sudip Mukherjee > wrote: >> The builds of allmodconfig of s390, m68k, tilegx, tilepro is failing >> with the error: >> drivers/net/phy/spi_ks8995.c:477:3: error: implicit declaration of function 'gpiod_set_value' >> drivers/net/phy/spi_ks8995.c:477:19: error: implicit declaration of function 'gpio_to_desc' > > Does that file include include/linux/gpio/consumer.h? > The GPIO subsystem provides dummies of these functions when CONFIG_GPIOLIB=n. > >> GPIO is now used to reset the switch so we should have a dependency on >> GPIOLIB. >> >> Fixes: cd6f288cbaab ("net: phy: spi_ks8995: add support for resetting switch using GPIO") >> Cc: Helmut Buchsbaum >> Signed-off-by: Sudip Mukherjee >> --- >> drivers/net/phy/Kconfig | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig >> index f0a7702..c6a4fe1 100644 >> --- a/drivers/net/phy/Kconfig >> +++ b/drivers/net/phy/Kconfig >> @@ -261,4 +261,4 @@ endif # PHYLIB >> >> config MICREL_KS8995MA >> tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch" >> - depends on SPI >> + depends on SPI && GPIOLIB > > I think that can become > > depends on SPI > depends on GPIOLIB || COMPILE_TEST > > after you've added the missing include. yes, ofcourse. Better change that what I have done. Just sent v2 after compile testing this change. regards sudip