From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
To: Geert Uytterhoeven <geert+renesas@glider.be>,
"David S. Miller" <davem@davemloft.net>
Cc: Yoshihiro Kaneko <ykaneko0929@gmail.com>,
Simon Horman <horms+renesas@verge.net.au>,
netdev@vger.kernel.org, linux-renesas-soc@vger.kernel.org
Subject: Re: [PATCH] ravb: Add missing free_irq() calls to ravb_close()
Date: Wed, 4 May 2016 16:30:09 +0300 [thread overview]
Message-ID: <5729F961.2050603@cogentembedded.com> (raw)
In-Reply-To: <1462366987-18418-1-git-send-email-geert+renesas@glider.be>
Hello.
On 05/04/2016 04:03 PM, Geert Uytterhoeven wrote:
> When reopening the network device on ra7795/salvator-x, e.g. after a
> DHCP timeout:
>
> IP-Config: Reopening network devices...
> genirq: Flags mismatch irq 139. 00000000 (eth0:ch24:emac) vs. 00000000 (eth0:ch24:emac)
> ravb e6800000.ethernet eth0: cannot request IRQ eth0:ch24:emac
> IP-Config: Failed to open eth0
> IP-Config: No network devices available
>
> The "mismatch" is due to requesting an IRQ that is already in use,
> while IRQF_PROBE_SHARED wasn't set.
>
> However, the real cause is that ravb_close() doesn't release any of the
> R-Car Gen3-specific secondary IRQs.
>
> Add the missing free_irq() calls to fix this.
>
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
This patch must be against net-next.git but you because the patch that
this one fixes is only there. You never indicated that. I'd also appreciate if
you specify the Fixed: tag.
> ---
> drivers/net/ethernet/renesas/ravb_main.c | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
> index 34066e0649f5c673..867caf6e7a5a65ad 100644
> --- a/drivers/net/ethernet/renesas/ravb_main.c
> +++ b/drivers/net/ethernet/renesas/ravb_main.c
> @@ -1667,6 +1667,13 @@ static int ravb_close(struct net_device *ndev)
> priv->phydev = NULL;
> }
>
> + if (priv->chip_id != RCAR_GEN2) {
> + free_irq(priv->tx_irqs[RAVB_NC], ndev);
> + free_irq(priv->rx_irqs[RAVB_NC], ndev);
> + free_irq(priv->tx_irqs[RAVB_BE], ndev);
> + free_irq(priv->rx_irqs[RAVB_BE], ndev);
Shame on me for not noticing this. :-(
> + free_irq(priv->emac_irq, ndev);
However, net.git is also affected, it only calls free_irq() on 'ndev->irq'.
Please submit 2 separate fixes against net.git and net-next.git.
> + }
> free_irq(ndev->irq, ndev);
>
> napi_disable(&priv->napi[RAVB_NC]);
>
MBR, Sergei
prev parent reply other threads:[~2016-05-04 13:30 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-04 13:03 [PATCH] ravb: Add missing free_irq() calls to ravb_close() Geert Uytterhoeven
2016-05-04 13:30 ` Sergei Shtylyov [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5729F961.2050603@cogentembedded.com \
--to=sergei.shtylyov@cogentembedded.com \
--cc=davem@davemloft.net \
--cc=geert+renesas@glider.be \
--cc=horms+renesas@verge.net.au \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=ykaneko0929@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).