[PATCH] dsa: b53: fix big-endian register access

[PATCH] dsa: b53: fix big-endian register access

[Arnd Bergmann]

The b53 dsa register access confusingly uses __raw register accessors
when both the CPU and the device are big-endian, but it uses little-
endian accessors when the same device is used from a little-endian
CPU, which makes no sense.

This uses normal accessors in device-endianess all the time, which
will work in all four combinations of register and CPU endianess,
and it will have the same barrier semantics in all cases.

This also seems to take care of a (false positive) warning I'm getting:

drivers/net/dsa/b53/b53_mmap.c: In function 'b53_mmap_read64':
drivers/net/dsa/b53/b53_mmap.c:109:10: error: 'hi' may be used uninitialized in this function [-Werror=maybe-uninitialized]
  *val = ((u64)hi << 32) | lo;

I originally planned to submit another patch for that warning
and did this one as a preparation cleanup, but it does seem to be
sufficient by itself.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 drivers/net/dsa/b53/b53_mmap.c | 20 ++++++++------------
 1 file changed, 8 insertions(+), 12 deletions(-)

diff --git a/drivers/net/dsa/b53/b53_mmap.c b/drivers/net/dsa/b53/b53_mmap.c
index f115ee25c0e8..b70daf9174d4 100644
--- a/drivers/net/dsa/b53/b53_mmap.c
+++ b/drivers/net/dsa/b53/b53_mmap.c
@@ -45,9 +45,8 @@ static int b53_mmap_read16(struct b53_device *dev, u8 page, u8 reg, u16 *val)
 	if (WARN_ON(reg % 2))
 		return -EINVAL;
 
-	if (IS_ENABLED(CONFIG_CPU_BIG_ENDIAN) && dev->pdata &&
-	    dev->pdata->big_endian)
-		*val = __raw_readw(regs + (page << 8) + reg);
+	if (dev->pdata && dev->pdata->big_endian)
+		*val = ioread16be(regs + (page << 8) + reg);
 	else
 		*val = readw(regs + (page << 8) + reg);
 
@@ -61,9 +60,8 @@ static int b53_mmap_read32(struct b53_device *dev, u8 page, u8 reg, u32 *val)
 	if (WARN_ON(reg % 4))
 		return -EINVAL;
 
-	if (IS_ENABLED(CONFIG_CPU_BIG_ENDIAN) && dev->pdata &&
-	    dev->pdata->big_endian)
-		*val = __raw_readl(regs + (page << 8) + reg);
+	if (dev->pdata && dev->pdata->big_endian)
+		*val = ioread32be(regs + (page << 8) + reg);
 	else
 		*val = readl(regs + (page << 8) + reg);
 
@@ -128,9 +126,8 @@ static int b53_mmap_write16(struct b53_device *dev, u8 page, u8 reg,
 	if (WARN_ON(reg % 2))
 		return -EINVAL;
 
-	if (IS_ENABLED(CONFIG_CPU_BIG_ENDIAN) && dev->pdata &&
-	    dev->pdata->big_endian)
-		__raw_writew(value, regs + (page << 8) + reg);
+	if (dev->pdata && dev->pdata->big_endian)
+		iowrite16be(value, regs + (page << 8) + reg);
 	else
 		writew(value, regs + (page << 8) + reg);
 
@@ -145,9 +142,8 @@ static int b53_mmap_write32(struct b53_device *dev, u8 page, u8 reg,
 	if (WARN_ON(reg % 4))
 		return -EINVAL;
 
-	if (IS_ENABLED(CONFIG_CPU_BIG_ENDIAN) && dev->pdata &&
-	    dev->pdata->big_endian)
-		__raw_writel(value, regs + (page << 8) + reg);
+	if (dev->pdata && dev->pdata->big_endian)
+		iowrite32be(value, regs + (page << 8) + reg);
 	else
 		writel(value, regs + (page << 8) + reg);
 
-- 
2.9.0

Re: [PATCH] dsa: b53: fix big-endian register access

[Florian Fainelli]

On 06/16/2016 02:00 AM, Arnd Bergmann wrote:
> The b53 dsa register access confusingly uses __raw register accessors
> when both the CPU and the device are big-endian, but it uses little-
> endian accessors when the same device is used from a little-endian
> CPU, which makes no sense.
> 
> This uses normal accessors in device-endianess all the time, which
> will work in all four combinations of register and CPU endianess,
> and it will have the same barrier semantics in all cases.
> 
> This also seems to take care of a (false positive) warning I'm getting:
> 
> drivers/net/dsa/b53/b53_mmap.c: In function 'b53_mmap_read64':
> drivers/net/dsa/b53/b53_mmap.c:109:10: error: 'hi' may be used uninitialized in this function [-Werror=maybe-uninitialized]
>   *val = ((u64)hi << 32) | lo;
> 
> I originally planned to submit another patch for that warning
> and did this one as a preparation cleanup, but it does seem to be
> sufficient by itself.
> 
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH] dsa: b53: fix big-endian register access

[David Miller]

From: Arnd Bergmann <arnd@arndb.de>
Date: Thu, 16 Jun 2016 11:00:05 +0200

> The b53 dsa register access confusingly uses __raw register accessors
> when both the CPU and the device are big-endian, but it uses little-
> endian accessors when the same device is used from a little-endian
> CPU, which makes no sense.
> 
> This uses normal accessors in device-endianess all the time, which
> will work in all four combinations of register and CPU endianess,
> and it will have the same barrier semantics in all cases.
> 
> This also seems to take care of a (false positive) warning I'm getting:
> 
> drivers/net/dsa/b53/b53_mmap.c: In function 'b53_mmap_read64':
> drivers/net/dsa/b53/b53_mmap.c:109:10: error: 'hi' may be used uninitialized in this function [-Werror=maybe-uninitialized]
>   *val = ((u64)hi << 32) | lo;
> 
> I originally planned to submit another patch for that warning
> and did this one as a preparation cleanup, but it does seem to be
> sufficient by itself.
> 
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Applied.