From: Daniel Borkmann <daniel@iogearbox.net>
To: Jamal Hadi Salim <jhs@mojatatu.com>, davem@davemloft.net
Cc: netdev@vger.kernel.org, xiyou.wangcong@gmail.com, fw@strlen.de
Subject: Re: [PATCH net-next 2/2] net sched actions: skbedit add support for mod-ing skb pkt_type
Date: Sun, 19 Jun 2016 20:09:11 +0200 [thread overview]
Message-ID: <5766DFC7.80603@iogearbox.net> (raw)
In-Reply-To: <1466262725-30289-2-git-send-email-jhs@emojatatu.com>
On 06/18/2016 05:12 PM, Jamal Hadi Salim wrote:
> From: Jamal Hadi Salim <jhs@mojatatu.com>
>
> Extremely useful for setting packet type to host so i dont
> have to modify the dst mac address using pedit (which requires
> that i know the mac address)
>
> Example usage:
> tc filter add dev eth0 parent ffff: protocol ip pref 9 u32 \
> match ip src 5.5.5.5/32 \
> flowid 1:5 action skbedit ptype host
>
> This will tag all packets incoming from 5.5.5.5 with type
> PACKET_HOST
>
> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
> ---
> include/net/tc_act/tc_skbedit.h | 10 +++++-----
> include/uapi/linux/tc_act/tc_skbedit.h | 2 ++
> net/sched/act_skbedit.c | 18 +++++++++++++++++-
> 3 files changed, 24 insertions(+), 6 deletions(-)
>
> diff --git a/include/net/tc_act/tc_skbedit.h b/include/net/tc_act/tc_skbedit.h
> index b496d5a..d01a5d4 100644
> --- a/include/net/tc_act/tc_skbedit.h
> +++ b/include/net/tc_act/tc_skbedit.h
> @@ -24,11 +24,11 @@
>
> struct tcf_skbedit {
> struct tcf_common common;
> - u32 flags;
> - u32 priority;
> - u32 mark;
> - u16 queue_mapping;
> - /* XXX: 16-bit pad here? */
> + u32 flags;
> + u32 priority;
> + u32 mark;
> + u16 queue_mapping;
> + u16 ptype;
> };
> #define to_skbedit(a) \
> container_of(a->priv, struct tcf_skbedit, common)
> diff --git a/include/uapi/linux/tc_act/tc_skbedit.h b/include/uapi/linux/tc_act/tc_skbedit.h
> index fecb5cc..a4d00c6 100644
> --- a/include/uapi/linux/tc_act/tc_skbedit.h
> +++ b/include/uapi/linux/tc_act/tc_skbedit.h
> @@ -27,6 +27,7 @@
> #define SKBEDIT_F_PRIORITY 0x1
> #define SKBEDIT_F_QUEUE_MAPPING 0x2
> #define SKBEDIT_F_MARK 0x4
> +#define SKBEDIT_F_PTYPE 0x8
>
> struct tc_skbedit {
> tc_gen;
> @@ -40,6 +41,7 @@ enum {
> TCA_SKBEDIT_QUEUE_MAPPING,
> TCA_SKBEDIT_MARK,
> TCA_SKBEDIT_PAD,
> + TCA_SKBEDIT_PTYPE,
> __TCA_SKBEDIT_MAX
> };
> #define TCA_SKBEDIT_MAX (__TCA_SKBEDIT_MAX - 1)
> diff --git a/net/sched/act_skbedit.c b/net/sched/act_skbedit.c
> index 53d1486..1c4c924 100644
> --- a/net/sched/act_skbedit.c
> +++ b/net/sched/act_skbedit.c
> @@ -47,6 +47,8 @@ static int tcf_skbedit(struct sk_buff *skb, const struct tc_action *a,
> skb_set_queue_mapping(skb, d->queue_mapping);
> if (d->flags & SKBEDIT_F_MARK)
> skb->mark = d->mark;
> + if (d->flags & SKBEDIT_F_PTYPE)
> + skb->pkt_type = d->ptype;
>
> spin_unlock(&d->tcf_lock);
> return d->tcf_action;
> @@ -57,6 +59,7 @@ static const struct nla_policy skbedit_policy[TCA_SKBEDIT_MAX + 1] = {
> [TCA_SKBEDIT_PRIORITY] = { .len = sizeof(u32) },
> [TCA_SKBEDIT_QUEUE_MAPPING] = { .len = sizeof(u16) },
> [TCA_SKBEDIT_MARK] = { .len = sizeof(u32) },
> + [TCA_SKBEDIT_PTYPE] = { .len = sizeof(u16) },
> };
>
> static int tcf_skbedit_init(struct net *net, struct nlattr *nla,
> @@ -68,7 +71,7 @@ static int tcf_skbedit_init(struct net *net, struct nlattr *nla,
> struct tc_skbedit *parm;
> struct tcf_skbedit *d;
> u32 flags = 0, *priority = NULL, *mark = NULL;
> - u16 *queue_mapping = NULL;
> + u16 *queue_mapping = NULL, *ptype = NULL;
> bool exists = false;
> int ret = 0, err;
>
> @@ -92,6 +95,13 @@ static int tcf_skbedit_init(struct net *net, struct nlattr *nla,
> queue_mapping = nla_data(tb[TCA_SKBEDIT_QUEUE_MAPPING]);
> }
>
> + if (tb[TCA_SKBEDIT_PTYPE] != NULL) {
> + ptype = nla_data(tb[TCA_SKBEDIT_PTYPE]);
> + if (!skb_pkt_type_ok(*ptype))
> + return -EINVAL;
> + flags |= SKBEDIT_F_PTYPE;
> + }
> +
> if (tb[TCA_SKBEDIT_MARK] != NULL) {
> flags |= SKBEDIT_F_MARK;
> mark = nla_data(tb[TCA_SKBEDIT_MARK]);
> @@ -132,6 +142,8 @@ static int tcf_skbedit_init(struct net *net, struct nlattr *nla,
> d->queue_mapping = *queue_mapping;
> if (flags & SKBEDIT_F_MARK)
> d->mark = *mark;
> + if (flags & SKBEDIT_F_PTYPE)
> + d->ptype = *ptype;
>
> d->tcf_action = parm->action;
>
> @@ -169,6 +181,10 @@ static int tcf_skbedit_dump(struct sk_buff *skb, struct tc_action *a,
> nla_put(skb, TCA_SKBEDIT_MARK, sizeof(d->mark),
> &d->mark))
> goto nla_put_failure;
> + if ((d->flags & SKBEDIT_F_PTYPE) &&
> + nla_put(skb, TCA_SKBEDIT_PTYPE, sizeof(d->ptype),
> + &d->ptype))
We already have things like nla_put_u16() etc, would be good to use them here,
doesn't have to be in this set, though, but rather as follow-up since it's used
like this also for other attributes.
> + goto nla_put_failure;
>
> tcf_tm_dump(&t, &d->tcf_tm);
> if (nla_put_64bit(skb, TCA_SKBEDIT_TM, sizeof(t), &t, TCA_SKBEDIT_PAD))
>
next prev parent reply other threads:[~2016-06-19 18:11 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-18 15:12 [PATCH net-next 1/2] net: simplify and make pkt_type_ok() available for other users Jamal Hadi Salim
2016-06-18 15:12 ` [PATCH net-next 2/2] net sched actions: skbedit add support for mod-ing skb pkt_type Jamal Hadi Salim
2016-06-19 18:09 ` Daniel Borkmann [this message]
2016-06-19 18:06 ` [PATCH net-next 1/2] net: simplify and make pkt_type_ok() available for other users Daniel Borkmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5766DFC7.80603@iogearbox.net \
--to=daniel@iogearbox.net \
--cc=davem@davemloft.net \
--cc=fw@strlen.de \
--cc=jhs@mojatatu.com \
--cc=netdev@vger.kernel.org \
--cc=xiyou.wangcong@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).