public inbox for netdev@vger.kernel.org
 help / color / mirror / Atom feed
From: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
To: Jamal Hadi Salim <jhs@mojatatu.com>, davem@davemloft.net
Cc: netdev@vger.kernel.org, xiyou.wangcong@gmail.com, daniel@iogearbox.net
Subject: Re: [PATCH net-next 1/1] net sched actions: mirred add support for setting Dst MAC address
Date: Sat, 2 Jul 2016 15:49:39 +0200	[thread overview]
Message-ID: <5777C673.8000703@cumulusnetworks.com> (raw)
In-Reply-To: <1467465978-28271-1-git-send-email-jhs@emojatatu.com>

On 02/07/16 15:26, Jamal Hadi Salim wrote:
> From: Jamal Hadi Salim <jhs@mojatatu.com>
> 
> Often redirecting or mirroring requires that we set the MAC address
> of the target device. While it is possible to pipe to a pedit action
> this obsoletes the need for that. This is justified feature because
> the dst MAC addresses rewrite is such a common use case.
> 
> Sample usage:
> sudo $TC filter add dev $ETH parent 1: protocol ip prio 10 \
> u32 match ip protocol 1 0xff flowid 1:2 \
> action mirred egress redirect dev $SPANPORT dst 02:15:15:15:15:15
> 
> This will match all icmp packets going out on dev $ETH and
> redirect them to dev $SPANPORT while setting their dst MAC address
> to 02:15:15:15:15:15
> 
> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
> ---
>  include/net/tc_act/tc_mirred.h        |  4 +++-
>  include/uapi/linux/tc_act/tc_mirred.h |  7 ++++---
>  net/sched/act_mirred.c                | 20 +++++++++++++++++++-
>  3 files changed, 26 insertions(+), 5 deletions(-)
> 
> diff --git a/include/net/tc_act/tc_mirred.h b/include/net/tc_act/tc_mirred.h
> index e891835..7e8bced 100644
> --- a/include/net/tc_act/tc_mirred.h
> +++ b/include/net/tc_act/tc_mirred.h
> @@ -6,10 +6,12 @@
>  
>  struct tcf_mirred {
>  	struct tcf_common	common;
> +	struct net_device __rcu	*tcfm_dev;
>  	int			tcfm_eaction;
>  	int			tcfm_ifindex;
>  	int			tcfm_ok_push;
> -	struct net_device __rcu	*tcfm_dev;
> +	u8			eth_dst[ETH_ALEN];
> +	/* XXX 6 bytes hole here*/
>  	struct list_head	tcfm_list;
>  };
>  #define to_mirred(a) \
> diff --git a/include/uapi/linux/tc_act/tc_mirred.h b/include/uapi/linux/tc_act/tc_mirred.h
> index 3d7a2b3..aaca1ff 100644
> --- a/include/uapi/linux/tc_act/tc_mirred.h
> +++ b/include/uapi/linux/tc_act/tc_mirred.h
> @@ -9,20 +9,21 @@
>  #define TCA_EGRESS_MIRROR 2 /* mirror packet to EGRESS */
>  #define TCA_INGRESS_REDIR 3  /* packet redirect to INGRESS*/
>  #define TCA_INGRESS_MIRROR 4 /* mirror packet to INGRESS */
> -                                                                                
> +
>  struct tc_mirred {
>  	tc_gen;
>  	int                     eaction;   /* one of IN/EGRESS_MIRROR/REDIR */
>  	__u32                   ifindex;  /* ifindex of egress port */
>  };
> -                                                                                
> +
>  enum {
>  	TCA_MIRRED_UNSPEC,
>  	TCA_MIRRED_TM,
>  	TCA_MIRRED_PARMS,
>  	TCA_MIRRED_PAD,
> +	TCA_MIRRED_DMAC,

Hi Jamal,
I think you should update "mirred_policy" in order to ensure that the attribute has
the minimum length for a mac address. Also a minor suggestion - maybe err out on a
zero mac address, otherwise the user might think the operation was successful.

Cheers,
 Nik

>  	__TCA_MIRRED_MAX
>  };
>  #define TCA_MIRRED_MAX (__TCA_MIRRED_MAX - 1)
> -                                                                                
> +
>  #endif
> diff --git a/net/sched/act_mirred.c b/net/sched/act_mirred.c
> index 5b135d3..044648d 100644
> --- a/net/sched/act_mirred.c
> +++ b/net/sched/act_mirred.c
> @@ -64,15 +64,21 @@ static int tcf_mirred_init(struct net *net, struct nlattr *nla,
>  	struct net_device *dev;
>  	int ret, ok_push = 0;
>  	bool exists = false;
> +	u8 *daddr = NULL;
>  
>  	if (nla == NULL)
>  		return -EINVAL;
> +
>  	ret = nla_parse_nested(tb, TCA_MIRRED_MAX, nla, mirred_policy);
>  	if (ret < 0)
>  		return ret;
> +
>  	if (tb[TCA_MIRRED_PARMS] == NULL)
>  		return -EINVAL;
> +
>  	parm = nla_data(tb[TCA_MIRRED_PARMS]);
> +	if (tb[TCA_MIRRED_DMAC])
> +		daddr = nla_data(tb[TCA_MIRRED_DMAC]);
>  
>  	exists = tcf_hash_check(tn, parm->index, a, bind);
>  	if (exists && bind)
> @@ -126,6 +132,9 @@ static int tcf_mirred_init(struct net *net, struct nlattr *nla,
>  	}
>  	m = to_mirred(a);
>  
> +	if (daddr)
> +		ether_addr_copy(m->eth_dst, daddr);
> +
>  	ASSERT_RTNL();
>  	m->tcf_action = parm->action;
>  	m->tcfm_eaction = parm->eaction;
> @@ -190,6 +199,9 @@ static int tcf_mirred(struct sk_buff *skb, const struct tc_action *a,
>  
>  	skb2->skb_iif = skb->dev->ifindex;
>  	skb2->dev = dev;
> +	if (!is_zero_ether_addr(m->eth_dst))
> +		ether_addr_copy(eth_hdr(skb2)->h_dest, m->eth_dst);
> +
>  	err = dev_queue_xmit(skb2);
>  
>  	if (err) {
> @@ -203,7 +215,8 @@ out:
>  	return retval;
>  }
>  
> -static int tcf_mirred_dump(struct sk_buff *skb, struct tc_action *a, int bind, int ref)
> +static int tcf_mirred_dump(struct sk_buff *skb, struct tc_action *a, int bind,
> +			   int ref)
>  {
>  	unsigned char *b = skb_tail_pointer(skb);
>  	struct tcf_mirred *m = a->priv;
> @@ -220,6 +233,11 @@ static int tcf_mirred_dump(struct sk_buff *skb, struct tc_action *a, int bind, i
>  	if (nla_put(skb, TCA_MIRRED_PARMS, sizeof(opt), &opt))
>  		goto nla_put_failure;
>  
> +	if (!is_zero_ether_addr(m->eth_dst)) {
> +		if (nla_put(skb, TCA_MIRRED_DMAC, ETH_ALEN, m->eth_dst))
> +			goto nla_put_failure;
> +	}
> +
>  	tcf_tm_dump(&t, &m->tcf_tm);
>  	if (nla_put_64bit(skb, TCA_MIRRED_TM, sizeof(t), &t, TCA_MIRRED_PAD))
>  		goto nla_put_failure;
> 

  reply	other threads:[~2016-07-02 13:49 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-02 13:26 [PATCH net-next 1/1] net sched actions: mirred add support for setting Dst MAC address Jamal Hadi Salim
2016-07-02 13:49 ` Nikolay Aleksandrov [this message]
2016-07-02 14:02   ` Jamal Hadi Salim
2016-07-02 14:07     ` Nikolay Aleksandrov
2016-07-02 14:16       ` Jamal Hadi Salim
2016-07-02 14:26         ` Jamal Hadi Salim

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5777C673.8000703@cumulusnetworks.com \
    --to=nikolay@cumulusnetworks.com \
    --cc=daniel@iogearbox.net \
    --cc=davem@davemloft.net \
    --cc=jhs@mojatatu.com \
    --cc=netdev@vger.kernel.org \
    --cc=xiyou.wangcong@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox