netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Daniel Borkmann <daniel@iogearbox.net>
To: Jakub Kicinski <kubakici@wp.pl>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>,
	netdev@vger.kernel.org, ast@kernel.org,
	dinan.gunawardena@netronome.com, jiri@resnulli.us,
	john.fastabend@gmail.com
Subject: Re: [RFCv2 16/16] nfp: bpf: add offload of TC direct action mode
Date: Tue, 30 Aug 2016 22:02:10 +0200	[thread overview]
Message-ID: <57C5E642.2070600@iogearbox.net> (raw)
In-Reply-To: <20160830125252.011f08d3@laptop>

On 08/30/2016 12:52 PM, Jakub Kicinski wrote:
> On Mon, 29 Aug 2016 23:09:35 +0200, Daniel Borkmann wrote:
>>> +	 *   0,1   ok        NOT SUPPORTED[1]
>>> +	 *   2   drop  0x22 -> drop,  count as stat1
>>> +	 *   4,5 nuke  0x02 -> drop
>>> +	 *   7  redir  0x44 -> redir, count as stat2
>>> +	 *   * unspec  0x11 -> pass,  count as stat0
>>> +	 *
>>> +	 * [1] We can't support OK and RECLASSIFY because we can't tell TC
>>> +	 *     the exact decision made.  We are forced to support UNSPEC
>>> +	 *     to handle aborts so that's the only one we handle for passing
>>> +	 *     packets up the stack.
>>
>> In da mode, RECLASSIFY is not supported, so this one could be scratched.
>> For the OK and UNSPEC part, couldn't both be treated the same (as in: OK /
>> pass to stack roughly equivalent as in sch_handle_ingress())? Or is the
>> issue that you cannot populate skb->tc_index when passing to stack (maybe
>> just fine to leave it at 0 for now)?
>
> The comment is a bit confus(ed|ing).  The problem is:
>
> tc filter add <filter1> skip_sw
> tc filter add <filter2> skip_hw
>
> If packet appears in the stack - was it because of OK or UNSPEC (or
> RECLASSIFY) in filter1?  Do we need to run filter2 or not?  Passing
> tc_index can be implemented the same way I do mark today.

Okay, I see, thanks for explaining. So, if passing tc_index (or any other
meta data) can be implemented the same way as we do with mark already,
could we store such verdict, say, in some unused skb->tc_verd bits (the
skb->tc_index could be filled by the program already) and pass that up the
stack to differentiate between them? There should be no prior user before
ingress, so that patch 4 could become something like:

   if (tc_skip_sw(prog->gen_flags)) {
      filter_res = tc_map_hw_verd_to_act(skb);
   } else if (at_ingress) {
      ...
   } ...

And I assume it wouldn't make any sense anyway to have a skip_sw filter
being chained /after/ some skip_hw and the like, right?

>> Just curious, does TC_ACT_REDIRECT work in this scenario?
>
> I do the redirects in the card, all the problems stem from the

Ok, cool.

> difficulty of passing full ret code in the skb from the driver
> to tc_classify()/cls_bpf_classify().

  reply	other threads:[~2016-08-30 20:02 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-08-26 18:05 [RFCv2 00/16] BPF hardware offload (cls_bpf for now) Jakub Kicinski
2016-08-26 18:06 ` [RFCv2 01/16] add basic register-field manipulation macros Jakub Kicinski
2016-08-29 14:34   ` Daniel Borkmann
2016-08-29 15:07     ` Jakub Kicinski
2016-08-29 15:40       ` Daniel Borkmann
2016-08-26 18:06 ` [RFCv2 02/16] net: cls_bpf: add hardware offload Jakub Kicinski
2016-08-29 14:51   ` Daniel Borkmann
2016-08-26 18:06 ` [RFCv2 03/16] net: cls_bpf: limit hardware offload by software-only flag Jakub Kicinski
2016-08-29 15:06   ` Daniel Borkmann
2016-08-29 15:15     ` Jakub Kicinski
2016-08-26 18:06 ` [RFCv2 04/16] net: cls_bpf: add support for marking filters as hardware-only Jakub Kicinski
2016-08-29 15:28   ` Daniel Borkmann
2016-08-26 18:06 ` [RFCv2 05/16] bpf: recognize 64bit immediate loads as consts Jakub Kicinski
2016-08-26 18:06 ` [RFCv2 06/16] bpf: verifier: recognize rN ^ rN as load of 0 Jakub Kicinski
2016-08-26 18:06 ` [RFCv2 07/16] bpf: enable non-core use of the verfier Jakub Kicinski
2016-08-26 23:29   ` Alexei Starovoitov
2016-08-27 11:40     ` Jakub Kicinski
2016-08-27 17:32       ` Alexei Starovoitov
2016-08-29 20:13         ` Daniel Borkmann
2016-08-29 20:17           ` Daniel Borkmann
2016-08-30 10:48             ` Jakub Kicinski
2016-08-30 19:07               ` Daniel Borkmann
2016-08-30 20:22                 ` Jakub Kicinski
2016-08-30 20:48                   ` Alexei Starovoitov
2016-08-30 21:00                     ` Daniel Borkmann
2016-08-31  1:18                       ` Alexei Starovoitov
2016-08-26 18:06 ` [RFCv2 08/16] bpf: export bpf_prog_clone functions Jakub Kicinski
2016-08-26 18:06 ` [RFCv2 09/16] nfp: add BPF to NFP code translator Jakub Kicinski
2016-08-26 18:06 ` [RFCv2 10/16] nfp: bpf: add hardware bpf offload Jakub Kicinski
2016-08-26 18:06 ` [RFCv2 11/16] net: cls_bpf: allow offloaded filters to update stats Jakub Kicinski
2016-08-29 20:43   ` Daniel Borkmann
2016-08-26 18:06 ` [RFCv2 12/16] net: bpf: " Jakub Kicinski
2016-08-26 18:06 ` [RFCv2 13/16] nfp: bpf: add packet marking support Jakub Kicinski
2016-08-26 18:06 ` [RFCv2 14/16] net: act_mirred: allow statistic updates from offloaded actions Jakub Kicinski
2016-08-26 18:06 ` [RFCv2 15/16] nfp: bpf: add support for legacy redirect action Jakub Kicinski
2016-08-26 18:06 ` [RFCv2 16/16] nfp: bpf: add offload of TC direct action mode Jakub Kicinski
2016-08-29 21:09   ` Daniel Borkmann
2016-08-30 10:52     ` Jakub Kicinski
2016-08-30 20:02       ` Daniel Borkmann [this message]
2016-08-30 20:50         ` Jakub Kicinski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=57C5E642.2070600@iogearbox.net \
    --to=daniel@iogearbox.net \
    --cc=ast@kernel.org \
    --cc=dinan.gunawardena@netronome.com \
    --cc=jakub.kicinski@netronome.com \
    --cc=jiri@resnulli.us \
    --cc=john.fastabend@gmail.com \
    --cc=kubakici@wp.pl \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).