[net-next PATCH 0/6] i40e: Add VF port representator support or SR-IOV VFs

[net-next PATCH 0/6] i40e: Add VF port representator support or SR-IOV VFs

[Sridhar Samudrala]

- Patch 1 introduces devlink interface to get/set the mode of SRIOV switch.
- Patch 2 adds support to create VF port representor(VFPR) netdevs associated
  with SR-IOV VFs that can be used to control/configure VFs from PF name space.
- Patch 3 enables syncing link state between VFs and VFPRs.
- Patch 4 adds a new type to metadata_dst to allow passing VF id to lower device.
- Patch 5 adds TX and RX support to VFPR netdevs.
- Patch 6 enables HW and SW VFPR statistics to be exposed via netlink on VFPR
  netdevs.

Jakub Kicinski (1):
  net: store port/representator id in metadata_dst

Sridhar Samudrala (5):
  i40e: Introduce devlink interface.
  i40e: Introduce VF Port Representator(VFPR) netdevs.
  i40e: Sync link state between VFs and VFPRs
  i40e: Add TX and RX support in switchdev mode.
  i40e: Add support for exposing VF port statistics via VFPR netdev on
    the host.

 drivers/net/ethernet/intel/Kconfig                 |   1 +
 drivers/net/ethernet/intel/i40e/i40e.h             |   4 +
 drivers/net/ethernet/intel/i40e/i40e_main.c        |  96 +++++-
 drivers/net/ethernet/intel/i40e/i40e_txrx.c        | 132 ++++++++-
 drivers/net/ethernet/intel/i40e/i40e_txrx.h        |   1 +
 drivers/net/ethernet/intel/i40e/i40e_type.h        |   3 +
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 321 ++++++++++++++++++++-
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h |  25 ++
 include/net/dst_metadata.h                         |  35 ++-
 net/core/dst.c                                     |  15 +-
 net/core/filter.c                                  |   1 +
 net/ipv4/ip_tunnel_core.c                          |   6 +-
 net/openvswitch/flow_netlink.c                     |   4 +-
 13 files changed, 610 insertions(+), 34 deletions(-)

-- 
2.5.5

Re: [net-next PATCH 0/6] i40e: Add VF port representator support or SR-IOV VFs

[David Miller]

From: Sridhar Samudrala <sridhar.samudrala@intel.com>
Date: Thu, 29 Dec 2016 22:20:57 -0800

> - Patch 1 introduces devlink interface to get/set the mode of SRIOV switch.
> - Patch 2 adds support to create VF port representor(VFPR) netdevs associated
>   with SR-IOV VFs that can be used to control/configure VFs from PF name space.
> - Patch 3 enables syncing link state between VFs and VFPRs.
> - Patch 4 adds a new type to metadata_dst to allow passing VF id to lower device.
> - Patch 5 adds TX and RX support to VFPR netdevs.
> - Patch 6 enables HW and SW VFPR statistics to be exposed via netlink on VFPR
>   netdevs.

Patch 4 did not show up on the lists.

The computer you did this work on is configured with a time in the future.

Re: [net-next PATCH 0/6] i40e: Add VF port representator support or SR-IOV VFs

[Samudrala, Sridhar]

On 12/29/2016 6:53 PM, David Miller wrote:
> From: Sridhar Samudrala <sridhar.samudrala@intel.com>
> Date: Thu, 29 Dec 2016 22:20:57 -0800
>
>> - Patch 1 introduces devlink interface to get/set the mode of SRIOV switch.
>> - Patch 2 adds support to create VF port representor(VFPR) netdevs associated
>>    with SR-IOV VFs that can be used to control/configure VFs from PF name space.
>> - Patch 3 enables syncing link state between VFs and VFPRs.
>> - Patch 4 adds a new type to metadata_dst to allow passing VF id to lower device.
>> - Patch 5 adds TX and RX support to VFPR netdevs.
>> - Patch 6 enables HW and SW VFPR statistics to be exposed via netlink on VFPR
>>    netdevs.
> Patch 4 did not show up on the lists.
I see it on intel-wired-lan list.  not sure why it didn't make it to netdev.
>
> The computer you did this work on is configured with a time in the future.
Will fix and send a v2 that will address other comments and include patch 4.

[net-next PATCH 1/6] i40e: Introduce devlink interface.

[Sridhar Samudrala]

Add initial devlink support to get/set the mode of SRIOV switch.
This patch sets the default mode as 'legacy' and enables getting the mode
and and setting it to 'legacy'.

The switch mode can be get/set via following 'devlink' commands.

# devlink dev eswitch show pci/0000:05:00.0
pci/0000:05:00.0: mode legacy
# devlink dev eswitch set pci/0000:05:00.0 mode switchdev
devlink answers: Operation not supported
# devlink dev eswitch set pci/0000:05:00.0 mode legacy
# devlink dev eswitch show pci/0000:05:00.0
pci/0000:05:00.0: mode legacy

Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
---
 drivers/net/ethernet/intel/Kconfig          |  1 +
 drivers/net/ethernet/intel/i40e/i40e.h      |  3 ++
 drivers/net/ethernet/intel/i40e/i40e_main.c | 80 ++++++++++++++++++++++++++---
 3 files changed, 76 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig
index 1349b45..0dbb87e 100644
--- a/drivers/net/ethernet/intel/Kconfig
+++ b/drivers/net/ethernet/intel/Kconfig
@@ -215,6 +215,7 @@ config I40E
 	tristate "Intel(R) Ethernet Controller XL710 Family support"
 	imply PTP_1588_CLOCK
 	depends on PCI
+	depends on MAY_USE_DEVLINK
 	---help---
 	  This driver supports Intel(R) Ethernet Controller XL710 Family of
 	  devices.  For more information on how to identify your adapter, go
diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
index ba8d309..410f83d 100644
--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -54,6 +54,8 @@
 #include <linux/clocksource.h>
 #include <linux/net_tstamp.h>
 #include <linux/ptp_clock_kernel.h>
+#include <net/devlink.h>
+
 #include "i40e_type.h"
 #include "i40e_prototype.h"
 #ifdef I40E_FCOE
@@ -448,6 +450,7 @@ struct i40e_pf {
 	u32 ioremap_len;
 	u32 fd_inv;
 	u16 phy_led_val;
+	enum devlink_eswitch_mode eswitch_mode;
 };
 
 /**
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index ad4cf63..c01a620 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -10910,6 +10910,57 @@ static void i40e_get_platform_mac_addr(struct pci_dev *pdev, struct i40e_pf *pf)
 }
 
 /**
+ * i40e_devlink_eswitch_mode_get
+ *
+ * @devlink: pointer to devlink struct
+ * @mode: sr-iov switch mode pointer
+ *
+ * Returns the switch mode of the associated PF in the @mode pointer.
+ */
+static int i40e_devlink_eswitch_mode_get(struct devlink *devlink, u16 *mode)
+{
+	struct i40e_pf *pf = devlink_priv(devlink);
+
+	*mode = pf->eswitch_mode;
+
+	return 0;
+}
+
+/**
+ * i40e_devlink_eswitch_mode_set
+ *
+ * @devlink: pointer to devlink struct
+ * @mode: sr-iov switch mode
+ *
+ * Set the switch mode of the associated PF.
+ * Returns 0 on success and -EOPNOTSUPP on error.
+ */
+static int i40e_devlink_eswitch_mode_set(struct devlink *devlink, u16 mode)
+{
+	struct i40e_pf *pf = devlink_priv(devlink);
+	int err = 0;
+
+	if (mode == pf->eswitch_mode)
+		goto done;
+
+	switch (mode) {
+	case DEVLINK_ESWITCH_MODE_LEGACY:
+		pf->eswitch_mode = mode;
+		break;
+	default:
+		err = -EOPNOTSUPP;
+		break;
+	}
+done:
+	return err;
+}
+
+static const struct devlink_ops i40e_devlink_ops = {
+	.eswitch_mode_get = i40e_devlink_eswitch_mode_get,
+	.eswitch_mode_set = i40e_devlink_eswitch_mode_set,
+};
+
+/**
  * i40e_probe - Device initialization routine
  * @pdev: PCI device information struct
  * @ent: entry in i40e_pci_tbl
@@ -10926,6 +10977,7 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	struct i40e_pf *pf;
 	struct i40e_hw *hw;
 	static u16 pfs_found;
+	struct devlink *devlink;
 	u16 wol_nvm_bits;
 	u16 link_status;
 	int err;
@@ -10959,20 +11011,28 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	pci_enable_pcie_error_reporting(pdev);
 	pci_set_master(pdev);
 
+	devlink = devlink_alloc(&i40e_devlink_ops, sizeof(*pf));
+	if (!devlink) {
+		dev_err(&pdev->dev, "devlink_alloc failed\n");
+		err = -ENOMEM;
+		goto err_devlink_alloc;
+	}
+
 	/* Now that we have a PCI connection, we need to do the
 	 * low level device setup.  This is primarily setting up
 	 * the Admin Queue structures and then querying for the
 	 * device's current profile information.
 	 */
-	pf = kzalloc(sizeof(*pf), GFP_KERNEL);
-	if (!pf) {
-		err = -ENOMEM;
-		goto err_pf_alloc;
-	}
+	pf = devlink_priv(devlink);
 	pf->next_vsi = 0;
 	pf->pdev = pdev;
 	set_bit(__I40E_DOWN, &pf->state);
 
+	pf->eswitch_mode = DEVLINK_ESWITCH_MODE_LEGACY;
+	err = devlink_register(devlink, &pdev->dev);
+	if (err)
+		goto err_devlink_register;
+
 	hw = &pf->hw;
 	hw->back = pf;
 
@@ -11445,8 +11505,10 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 err_pf_reset:
 	iounmap(hw->hw_addr);
 err_ioremap:
-	kfree(pf);
-err_pf_alloc:
+	devlink_unregister(devlink);
+err_devlink_register:
+	devlink_free(devlink);
+err_devlink_alloc:
 	pci_disable_pcie_error_reporting(pdev);
 	pci_release_mem_regions(pdev);
 err_pci_reg:
@@ -11468,6 +11530,7 @@ static void i40e_remove(struct pci_dev *pdev)
 {
 	struct i40e_pf *pf = pci_get_drvdata(pdev);
 	struct i40e_hw *hw = &pf->hw;
+	struct devlink *devlink = priv_to_devlink(pf);
 	i40e_status ret_code;
 	int i;
 
@@ -11554,7 +11617,8 @@ static void i40e_remove(struct pci_dev *pdev)
 	kfree(pf->vsi);
 
 	iounmap(hw->hw_addr);
-	kfree(pf);
+	devlink_unregister(devlink);
+	devlink_free(devlink);
 	pci_release_mem_regions(pdev);
 
 	pci_disable_pcie_error_reporting(pdev);
-- 
2.5.5

[net-next PATCH 2/6] i40e: Introduce VF Port Representator(VFPR) netdevs.

[Sridhar Samudrala]

VF Port Representator netdevs are created for each VF if the switch mode
is set to 'switchdev'. These netdevs can be used to control and configure
VFs from PFs namespace. They enable exposing VF statistics, configure and
monitor link state, mtu, filters, fdb/vlan entries etc. of VFs.
Broadcast filters are not enabled in switchdev mode.

Sample script to create VF port representors
# rmmod i40e; modprobe i40e
# devlink dev eswitch set pci/0000:05:00.0 mode switchdev
# echo 2 > /sys/class/net/enp5s0f0/device/sriov_numvfs
# ip l show
297: enp5s0f0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop portid 6805ca2e7268 state DOWN mode DEFAULT group default qlen 1000
     link/ether 68:05:ca:2e:72:68 brd ff:ff:ff:ff:ff:ff
     vf 0 MAC 00:00:00:00:00:00, spoof checking on, link-state auto, trust off
     vf 1 MAC 00:00:00:00:00:00, spoof checking on, link-state auto, trust off
299: enp5s0f0-vf0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
     link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
300: enp5s0f0-vf1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
     link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff

Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c        |  14 +-
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 151 ++++++++++++++++++++-
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h |  14 ++
 3 files changed, 172 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index c01a620..03d07dd 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -10938,15 +10938,27 @@ static int i40e_devlink_eswitch_mode_get(struct devlink *devlink, u16 *mode)
 static int i40e_devlink_eswitch_mode_set(struct devlink *devlink, u16 mode)
 {
 	struct i40e_pf *pf = devlink_priv(devlink);
-	int err = 0;
+	struct i40e_vf *vf;
+	int i, err = 0;
 
 	if (mode == pf->eswitch_mode)
 		goto done;
 
 	switch (mode) {
 	case DEVLINK_ESWITCH_MODE_LEGACY:
+		for (i = 0; i < pf->num_alloc_vfs; i++) {
+			vf = &(pf->vf[i]);
+			i40e_free_vfpr_netdev(vf);
+		}
 		pf->eswitch_mode = mode;
 		break;
+	case DEVLINK_ESWITCH_MODE_SWITCHDEV:
+		for (i = 0; i < pf->num_alloc_vfs; i++) {
+			vf = &(pf->vf[i]);
+			i40e_alloc_vfpr_netdev(vf, i);
+		}
+                pf->eswitch_mode = mode;
+		break;
 	default:
 		err = -EOPNOTSUPP;
 		break;
diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index a6198b7..6c5b296 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -697,12 +697,16 @@ static int i40e_alloc_vsi_res(struct i40e_vf *vf, enum i40e_vsi_type type)
 					 "Could not add MAC filter %pM for VF %d\n",
 					vf->default_lan_addr.addr, vf->vf_id);
 		}
-		eth_broadcast_addr(broadcast);
-		f = i40e_add_filter(vsi, broadcast,
-				    vf->port_vlan_id ? vf->port_vlan_id : -1);
-		if (!f)
-			dev_info(&pf->pdev->dev,
-				 "Could not allocate VF broadcast filter\n");
+
+		/* Add VF broadcast filter only in 'legacy' mode */
+		if (vsi->back->eswitch_mode == DEVLINK_ESWITCH_MODE_LEGACY) {
+			eth_broadcast_addr(broadcast);
+			f = i40e_add_filter(vsi, broadcast,
+					    vf->port_vlan_id ? vf->port_vlan_id : -1);
+			if (!f)
+				dev_info(&pf->pdev->dev,
+					 "Could not allocate VF broadcast filter\n");
+		}
 		spin_unlock_bh(&vsi->mac_filter_hash_lock);
 		i40e_write_rx_ctl(&pf->hw, I40E_VFQF_HENA1(0, vf->vf_id),
 				  (u32)hena);
@@ -1020,6 +1024,136 @@ void i40e_reset_vf(struct i40e_vf *vf, bool flr)
 }
 
 /**
+ * i40e_vfpr_netdev_open
+ * @dev: network interface device structure
+ *
+ * Called when vfpr netdevice is brought up.
+ **/
+static int i40e_vfpr_netdev_open(struct net_device *dev)
+{
+	return 0;
+}
+
+/**
+ * i40e_vfpr_netdev_stop
+ * @dev: network interface device structure
+ *
+ * Called when vfpr netdevice is brought down.
+ **/
+static int i40e_vfpr_netdev_stop(struct net_device *dev)
+{
+	return 0;
+}
+
+static const struct net_device_ops i40e_vfpr_netdev_ops = {
+	.ndo_open       	= i40e_vfpr_netdev_open,
+	.ndo_stop       	= i40e_vfpr_netdev_stop,
+};
+
+/**
+ * i40e_update_vf_broadcast_filter
+ * @vf: pointer to the VF structure
+ * @enable: boolean flag indicating add/delete
+ *
+ * add/delete VFs broadcast filter
+ **/
+void i40e_update_vf_broadcast_filter(struct i40e_vf *vf, bool enable)
+{
+	struct i40e_pf *pf = vf->pf;
+	struct i40e_vsi *vsi = pf->vsi[vf->lan_vsi_idx];
+	u8 broadcast[ETH_ALEN];
+	int err;
+
+	spin_lock_bh(&vsi->mac_filter_hash_lock);
+	eth_broadcast_addr(broadcast);
+	if (enable)
+		i40e_add_filter(vsi, broadcast, vf->port_vlan_id ? vf->port_vlan_id : -1);
+	else
+		i40e_del_filter(vsi, broadcast, vf->port_vlan_id ? vf->port_vlan_id : -1);
+	spin_unlock_bh(&vsi->mac_filter_hash_lock);
+
+	/* update broadcast filter */
+	err = i40e_sync_vsi_filters(vsi);
+	if (err)
+		dev_err(&pf->pdev->dev, "Unable to program bcast filter\n");
+}
+
+/**
+ * i40e_alloc_vfpr_netdev
+ * @vf: pointer to the VF structure
+ * @vf_num: VF number
+ *
+ * Create VF Port representor netdev
+ **/
+int i40e_alloc_vfpr_netdev(struct i40e_vf *vf, u16 vf_num)
+{
+	struct net_device *vfpr_netdev;
+	char netdev_name[IFNAMSIZ];
+	struct i40e_vfpr_netdev_priv *priv;
+	struct i40e_pf *pf = vf->pf;
+	struct i40e_vsi *vsi = pf->vsi[pf->lan_vsi];
+	int err;
+
+	snprintf(netdev_name, IFNAMSIZ, "%s-vf%d", vsi->netdev->name, vf_num);
+	vfpr_netdev = alloc_netdev(sizeof(struct i40e_vfpr_netdev_priv),
+				   netdev_name, NET_NAME_UNKNOWN, ether_setup);
+	if (!vfpr_netdev) {
+		dev_err(&pf->pdev->dev, "alloc_netdev failed for vf:%d\n",
+			vf_num);
+		return -ENOMEM;
+	}
+
+	pf->vf[vf_num].vfpr_netdev = vfpr_netdev;
+
+	priv = netdev_priv(vfpr_netdev);
+	priv->vf = &(pf->vf[vf_num]);
+
+	vfpr_netdev->netdev_ops = &i40e_vfpr_netdev_ops;
+
+	netif_carrier_off(vfpr_netdev);
+	netif_tx_disable(vfpr_netdev);
+
+	err = register_netdev(vfpr_netdev);
+	if (err) {
+		dev_err(&pf->pdev->dev, "register_netdev failed for vf: %s\n",
+			vf->vfpr_netdev->name);
+		free_netdev(vfpr_netdev);
+		return err;
+	}
+
+	dev_info(&pf->pdev->dev, "VF Port representor(%s) created for VF %d\n",
+		 vf->vfpr_netdev->name, vf_num);
+
+	/* Delete broadcast filter for VF */
+	i40e_update_vf_broadcast_filter(vf, false);
+
+	return 0;
+}
+
+/**
+ * i40e_free_vfpr_netdev
+ * @vf: pointer to the VF structure
+ *
+ * Free VF Port representor netdev
+ **/
+void i40e_free_vfpr_netdev(struct i40e_vf *vf)
+{
+	struct i40e_pf *pf = vf->pf;
+
+	if (!vf->vfpr_netdev)
+		return;
+
+	dev_info(&pf->pdev->dev, "Freeing VF Port representor(%s)\n",
+		 vf->vfpr_netdev->name);
+
+	unregister_netdev(vf->vfpr_netdev);
+	free_netdev(vf->vfpr_netdev);
+
+	/* Add broadcast filter to VF */
+	i40e_update_vf_broadcast_filter(vf, true);
+}
+
+/**
  * i40e_free_vfs
  * @pf: pointer to the PF structure
  *
@@ -1060,6 +1194,9 @@ void i40e_free_vfs(struct i40e_pf *pf)
 			i40e_free_vf_res(&pf->vf[i]);
 		/* disable qp mappings */
 		i40e_disable_vf_mappings(&pf->vf[i]);
+
+		if (pf->eswitch_mode == DEVLINK_ESWITCH_MODE_SWITCHDEV)
+			i40e_free_vfpr_netdev(&pf->vf[i]);
 	}
 
 	kfree(pf->vf);
@@ -1127,6 +1264,8 @@ int i40e_alloc_vfs(struct i40e_pf *pf, u16 num_alloc_vfs)
 		/* VF resources get allocated during reset */
 		i40e_reset_vf(&vfs[i], false);
 
+		if (pf->eswitch_mode == DEVLINK_ESWITCH_MODE_SWITCHDEV)
+			i40e_alloc_vfpr_netdev(&vfs[i], i);
 	}
 	pf->num_alloc_vfs = num_alloc_vfs;
 
diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h
index 4012d06..1e5def1 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h
@@ -72,10 +72,21 @@ enum i40e_vf_capabilities {
 	I40E_VIRTCHNL_VF_CAP_IWARP,
 };
 
+/* VF Port representor netdev private structure */
+struct i40e_vfpr_netdev_priv {
+	struct i40e_vf *vf;
+};
+
 /* VF information structure */
 struct i40e_vf {
 	struct i40e_pf *pf;
 
+	/* VF Port representor netdev that allows control and configuration
+	 * of VFs from the host. Enables returning VF stats, configuring link
+	 * state, mtu, fdb/vlans etc.
+	 */
+	struct net_device *vfpr_netdev;
+
 	/* VF id in the PF space */
 	s16 vf_id;
 	/* all VF vsis connect to the same parent */
@@ -142,4 +153,7 @@ int i40e_ndo_set_vf_spoofchk(struct net_device *netdev, int vf_id, bool enable);
 void i40e_vc_notify_link_state(struct i40e_pf *pf);
 void i40e_vc_notify_reset(struct i40e_pf *pf);
 
+int i40e_alloc_vfpr_netdev(struct i40e_vf *vf, u16 vf_num);
+void i40e_free_vfpr_netdev(struct i40e_vf *vf);
+
 #endif /* _I40E_VIRTCHNL_PF_H_ */
-- 
2.5.5

Re: [net-next PATCH 2/6] i40e: Introduce VF Port Representator(VFPR) netdevs.

[David Miller]

From: Sridhar Samudrala <sridhar.samudrala@intel.com>
Date: Thu, 29 Dec 2016 22:20:59 -0800

>  		/* VF resources get allocated during reset */
>  		i40e_reset_vf(&vfs[i], false);
>  
> +		if (pf->eswitch_mode == DEVLINK_ESWITCH_MODE_SWITCHDEV)
> +			i40e_alloc_vfpr_netdev(&vfs[i], i);

You aren't checking for, and unwinding from, errors signalled
by i40e_alloc_vfpr_netdev().

[net-next PATCH 3/6] i40e: Sync link state between VFs and VFPRs

[Sridhar Samudrala]

This patch enables
- reflecting the link state of VFPR based on VF admin state & link state
  of VF based on admin state of VFPR.
- bringing up/down the VFPR sends a notification to update VF link state.
- bringing up/down the VF will cause the link state update of VFPR.
- enable/disable VF link state via ndo_set_vf_link_state will update the
  admin state of associated VFPR.

PF: enp5s0f0, VFs: enp5s2,enp5s2f1 VFPRs:enp5s0f0-vf0, enp5s0f0-vf1
# rmmod i40e; modprobe i40e
# devlink dev eswitch set pci/0000:05:00.0 mode switchdev
# echo 2 > /sys/class/net/enp5s0f0/device/sriov_numvfs

# ip link set enp5s2 up
# ip link set enp5s0f0-vf0 up
# ip link set enp5s0f0-vf1 up

/* enp5s2 UP -> enp5s0f0-vf0 CARRIER ON */
# ip link show enp5s0f0-vf0
215: enp5s0f0-vf0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000
     link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff

/* enp5s0f0-vf0 UP -> enp5s2 CARRIER ON */
# ip link show enp5s2
218: enp5s2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
     link/ether ea:4d:60:bc:6f:85 brd ff:ff:ff:ff:ff:ff

/* enp5s2f1 DOWN -> enp5s0f0-vf1 NO-CARRIER */
# ip link show enp5s0f0-vf1
216: enp5s0f0-vf1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel state DOWN mode DEFAULT group default qlen 1000
     link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff

# ip link set enp5s0f0-vf0 down
# ip link set enp5s2f1 up

/* enp5s0-vf0 DOWN -> enp5s2 NO_CARRIER */
# ip link show enp5s2
218: enp5s2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000
     link/ether ea:4d:60:bc:6f:85 brd ff:ff:ff:ff:ff:ff

# ip -d link show enp5s0f0
213: enp5s0f0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop portid 6805ca27268 state DOWN mode DEFAULT group default qlen 1000
     link/ether 68:05:ca:2e:72:68 brd ff:ff:ff:ff:ff:ff promiscuity 0 addrgenmode eui64
     vf 0 MAC 00:00:00:00:00:00, spoof checking on, link-state disable, trust off
     vf 1 MAC 00:00:00:00:00:00, spoof checking on, link-state enable, trust off

Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 44 ++++++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index 6c5b296..3ea7235 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -1031,6 +1031,13 @@ void i40e_reset_vf(struct i40e_vf *vf, bool flr)
  **/
 static int i40e_vfpr_netdev_open(struct net_device *dev)
 {
+	struct i40e_vfpr_netdev_priv *priv = netdev_priv(dev);
+	struct i40e_vf *vf = priv->vf;
+
+	vf->link_forced = true;
+	vf->link_up = true;
+	i40e_vc_notify_vf_link_state(vf);
+
 	return 0;
 }
 
@@ -1042,6 +1049,13 @@ static int i40e_vfpr_netdev_open(struct net_device *dev)
  **/
 static int i40e_vfpr_netdev_stop(struct net_device *dev)
 {
+	struct i40e_vfpr_netdev_priv *priv = netdev_priv(dev);
+	struct i40e_vf *vf = priv->vf;
+
+	vf->link_forced = true;
+	vf->link_up = false;
+	i40e_vc_notify_vf_link_state(vf);
+
 	return 0;
 }
 
@@ -1127,6 +1141,13 @@ int i40e_alloc_vfpr_netdev(struct i40e_vf *vf, u16 vf_num)
 	/* Delete broadcast filter for VF */
 	i40e_update_vf_broadcast_filter(vf, false);
 
+	/* Reset VF link as we are changing the mode to 'switchdev'. VFPR netdev
+	 * needs to be brought up to enable VF link.
+	 */
+	vf->link_forced = true;
+	vf->link_up = false;
+	i40e_vc_notify_vf_link_state(vf);
+
 	return 0;
 }
 
@@ -1151,6 +1172,10 @@ void i40e_free_vfpr_netdev(struct i40e_vf *vf)
 
 	/* Add broadcast filter to VF */
 	i40e_update_vf_broadcast_filter(vf, true);
+
+	/* In legacy mode, VF link is not controlled by VFPR */
+	vf->link_forced = false;
+	i40e_vc_notify_vf_link_state(vf);
 }
 
 /**
@@ -1907,6 +1932,10 @@ static int i40e_vc_enable_queues_msg(struct i40e_vf *vf, u8 *msg, u16 msglen)
 
 	if (i40e_vsi_start_rings(pf->vsi[vf->lan_vsi_idx]))
 		aq_ret = I40E_ERR_TIMEOUT;
+
+	if ((0 == aq_ret) && vf->vfpr_netdev)
+		netif_carrier_on(vf->vfpr_netdev);
+
 error_param:
 	/* send the response to the VF */
 	return i40e_vc_send_resp_to_vf(vf, I40E_VIRTCHNL_OP_ENABLE_QUEUES,
@@ -1946,6 +1975,9 @@ static int i40e_vc_disable_queues_msg(struct i40e_vf *vf, u8 *msg, u16 msglen)
 
 	i40e_vsi_stop_rings(pf->vsi[vf->lan_vsi_idx]);
 
+	if ((0 == aq_ret) && vf->vfpr_netdev)
+		netif_carrier_off(vf->vfpr_netdev);
+
 error_param:
 	/* send the response to the VF */
 	return i40e_vc_send_resp_to_vf(vf, I40E_VIRTCHNL_OP_DISABLE_QUEUES,
@@ -3186,6 +3218,7 @@ int i40e_ndo_set_vf_link_state(struct net_device *netdev, int vf_id, int link)
 	struct i40e_netdev_priv *np = netdev_priv(netdev);
 	struct i40e_pf *pf = np->vsi->back;
 	struct i40e_virtchnl_pf_event pfe;
+	struct net_device *vfpr_netdev;
 	struct i40e_hw *hw = &pf->hw;
 	struct i40e_vf *vf;
 	int abs_vf_id;
@@ -3228,6 +3261,17 @@ int i40e_ndo_set_vf_link_state(struct net_device *netdev, int vf_id, int link)
 		ret = -EINVAL;
 		goto error_out;
 	}
+
+	vfpr_netdev = vf->vfpr_netdev;
+	if (vfpr_netdev) {
+		unsigned int flags = vfpr_netdev->flags;
+
+		if (vf->link_up)
+			dev_change_flags(vfpr_netdev, flags | IFF_UP);
+		else
+			dev_change_flags(vfpr_netdev, flags & ~IFF_UP);
+	}
+
 	/* Notify the VF of its new link state */
 	i40e_aq_send_msg_to_vf(hw, abs_vf_id, I40E_VIRTCHNL_OP_EVENT,
 			       0, (u8 *)&pfe, sizeof(pfe), NULL);
-- 
2.5.5

Re: [net-next PATCH 3/6] i40e: Sync link state between VFs and VFPRs

[Or Gerlitz]

On Fri, Dec 30, 2016 at 8:21 AM, Sridhar Samudrala
<sridhar.samudrala@intel.com> wrote:

[..]
> - enable/disable VF link state via ndo_set_vf_link_state will update the
>   admin state of associated VFPR.

why you want to do that? anything missing here w.o using the legacy mode?

Re: [net-next PATCH 3/6] i40e: Sync link state between VFs and VFPRs

[Samudrala, Sridhar]

On 12/30/2016 7:43 AM, Or Gerlitz wrote:
> On Fri, Dec 30, 2016 at 8:21 AM, Sridhar Samudrala
> <sridhar.samudrala@intel.com> wrote:
>
> [..]
>> - enable/disable VF link state via ndo_set_vf_link_state will update the
>>    admin state of associated VFPR.
> why you want to do that? anything missing here w.o using the legacy mode?
Nothing missing.  legacy way of controlling the VF link state is 
supported even in switchdev mode
until it is deprecated.

[net-next PATCH 5/6] i40e: Add TX and RX support in switchdev mode.

[Sridhar Samudrala]

In switchdev mode, broadcast filter is not enabled on VFs, The broadcasts and
unknown frames from VFs are received by the PF and passed to corresponding VF
port representator netdev.
A host based switching entity like a linux bridge or OVS redirects these frames
to the right VFs via VFPR netdevs. Any frames sent via VFPR netdevs are sent as
directed transmits to the corresponding VFs. To enable directed transmit, skb
metadata dst is used to pass the VF id and the frame is requeued to call the PFs
transmit routine.

Small script to demonstrate inter VF pings in switchdev mode.
PF: enp5s0f0, VFs: enp5s2,enp5s2f1 VFPRs:enp5s0f0-vf0, enp5s0f0-vf1

# rmmod i40e; modprobe i40e
# devlink dev eswitch set pci/0000:05:00.0 mode switchdev
# echo 2 > /sys/class/net/enp5s0f0/device/sriov_numvfs
# ip link set enp5s0f0 vf 0 mac 00:11:22:33:44:55
# ip link set enp5s0f0 vf 1 mac 00:11:22:33:44:56
# rmmod i40evf; modprobe i40evf

/* Create 2 namespaces and move the VFs to
# ip netns add ns0
# ip link set enp5s2 netns ns0
# ip netns exec ns0 ip addr add 192.168.1.10/24 dev enp5s2
# ip netns exec ns0 ip link set enp5s2 up
# ip netns add ns1
# ip link set enp5s2f1 netns ns1
# ip netns exec ns1 ip addr add 192.168.1.11/24 dev enp5s2f1
# ip netns exec ns1 ip link set enp5s2f1 up

/* bring up pf and vfpr netdevs */
# ip link set enp5s0f0 up
# ip link set enp5s0f0-vf0 up
# ip link set enp5s0f0-vf1 up

/* Create a linux bridge and add vfpr netdevs to it. */
# ip link add vfpr-br type bridge
# ip link set enp5s0f0-vf0 master vfpr-br
# ip link set enp5s0f0-vf1 master vfpr-br
# ip addr add 192.168.1.1/24 dev vfpr-br
# ip link set vfpr-br up

# ip netns exec ns0 ping -c3 192.168.1.11
# ip netns exec ns1 ping -c3 192.168.1.10

Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e.h             |  1 +
 drivers/net/ethernet/intel/i40e/i40e_main.c        |  4 +
 drivers/net/ethernet/intel/i40e/i40e_txrx.c        | 92 ++++++++++++++++++++--
 drivers/net/ethernet/intel/i40e/i40e_txrx.h        |  1 +
 drivers/net/ethernet/intel/i40e/i40e_type.h        |  3 +
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 19 ++++-
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h |  1 +
 7 files changed, 114 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
index 410f83d..1c88db5 100644
--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -55,6 +55,7 @@
 #include <linux/net_tstamp.h>
 #include <linux/ptp_clock_kernel.h>
 #include <net/devlink.h>
+#include <net/dst_metadata.h>
 
 #include "i40e_type.h"
 #include "i40e_prototype.h"
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 03d07dd..431694e 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -10938,6 +10938,7 @@ static int i40e_devlink_eswitch_mode_get(struct devlink *devlink, u16 *mode)
 static int i40e_devlink_eswitch_mode_set(struct devlink *devlink, u16 mode)
 {
 	struct i40e_pf *pf = devlink_priv(devlink);
+	struct i40e_vsi *vsi = pf->vsi[pf->lan_vsi];
 	struct i40e_vf *vf;
 	int i, err = 0;
 
@@ -10951,6 +10952,8 @@ static int i40e_devlink_eswitch_mode_set(struct devlink *devlink, u16 mode)
 			i40e_free_vfpr_netdev(vf);
 		}
 		pf->eswitch_mode = mode;
+		vsi->netdev->priv_flags |=
+			(IFF_XMIT_DST_RELEASE | IFF_XMIT_DST_RELEASE_PERM);
 		break;
 	case DEVLINK_ESWITCH_MODE_SWITCHDEV:
 		for (i = 0; i < pf->num_alloc_vfs; i++) {
@@ -10958,6 +10961,7 @@ static int i40e_devlink_eswitch_mode_set(struct devlink *devlink, u16 mode)
 			i40e_alloc_vfpr_netdev(vf, i);
 		}
                 pf->eswitch_mode = mode;
+		netif_keep_dst(vsi->netdev);
 		break;
 	default:
 		err = -EOPNOTSUPP;
diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index 352cf7c..b46ddaa 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -1176,16 +1176,37 @@ static bool i40e_alloc_mapped_page(struct i40e_ring *rx_ring,
  * @rx_ring:  rx ring in play
  * @skb: packet to send up
  * @vlan_tag: vlan tag for packet
+ * @lpbk: is it a loopback frame?
  **/
 static void i40e_receive_skb(struct i40e_ring *rx_ring,
-			     struct sk_buff *skb, u16 vlan_tag)
+			     struct sk_buff *skb, u16 vlan_tag, bool lpbk)
 {
 	struct i40e_q_vector *q_vector = rx_ring->q_vector;
+	struct i40e_pf *pf = rx_ring->vsi->back;
+	struct i40e_vf *vf;
+	struct ethhdr *eth;
+	int vf_id;
 
 	if ((rx_ring->netdev->features & NETIF_F_HW_VLAN_CTAG_RX) &&
 	    (vlan_tag & VLAN_VID_MASK))
 		__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan_tag);
 
+	if ((pf->eswitch_mode == DEVLINK_ESWITCH_MODE_LEGACY) || !lpbk)
+		goto gro_receive;
+
+	/* If a loopback packet is received from a VF in switchdev mode, pass the
+	 * frame to the corresponding VFPR netdev based on the source MAC in the frame.
+	 */
+	eth = (struct ethhdr *)skb_mac_header(skb);
+	for (vf_id = 0; vf_id < pf->num_alloc_vfs; vf_id++) {
+		vf = &pf->vf[vf_id];
+		if (ether_addr_equal(eth->h_source, vf->default_lan_addr.addr)) {
+			skb->dev = vf->vfpr_netdev;
+			break;
+		}
+	}
+
+gro_receive:
 	napi_gro_receive(&q_vector->napi, skb);
 }
 
@@ -1394,6 +1415,7 @@ static inline void i40e_rx_hash(struct i40e_ring *ring,
  * @rx_desc: pointer to the EOP Rx descriptor
  * @skb: pointer to current skb being populated
  * @rx_ptype: the packet type decoded by hardware
+ * @lpbk: is it a loopback frame?
  *
  * This function checks the ring, descriptor, and packet information in
  * order to populate the hash, checksum, VLAN, protocol, and
@@ -1402,7 +1424,7 @@ static inline void i40e_rx_hash(struct i40e_ring *ring,
 static inline
 void i40e_process_skb_fields(struct i40e_ring *rx_ring,
 			     union i40e_rx_desc *rx_desc, struct sk_buff *skb,
-			     u8 rx_ptype)
+			     u8 rx_ptype, bool *lpbk)
 {
 	u64 qword = le64_to_cpu(rx_desc->wb.qword1.status_error_len);
 	u32 rx_status = (qword & I40E_RXD_QW1_STATUS_MASK) >>
@@ -1411,6 +1433,9 @@ void i40e_process_skb_fields(struct i40e_ring *rx_ring,
 	u32 tsyn = (rx_status & I40E_RXD_QW1_STATUS_TSYNINDX_MASK) >>
 		   I40E_RXD_QW1_STATUS_TSYNINDX_SHIFT;
 
+	*lpbk = !!((rx_status & I40E_RXD_QW1_STATUS_LPBK_MASK) >>
+		   I40E_RXD_QW1_STATUS_LPBK_SHIFT);
+
 	if (unlikely(tsynvalid))
 		i40e_ptp_rx_hwtstamp(rx_ring->vsi->back, skb, tsyn);
 
@@ -1736,6 +1761,7 @@ static int i40e_clean_rx_irq(struct i40e_ring *rx_ring, int budget)
 	while (likely(total_rx_packets < budget)) {
 		union i40e_rx_desc *rx_desc;
 		struct sk_buff *skb;
+		bool lpbk;
 		u16 vlan_tag;
 		u8 rx_ptype;
 		u64 qword;
@@ -1794,7 +1820,7 @@ static int i40e_clean_rx_irq(struct i40e_ring *rx_ring, int budget)
 			   I40E_RXD_QW1_PTYPE_SHIFT;
 
 		/* populate checksum, VLAN, and protocol */
-		i40e_process_skb_fields(rx_ring, rx_desc, skb, rx_ptype);
+		i40e_process_skb_fields(rx_ring, rx_desc, skb, rx_ptype, &lpbk);
 
 #ifdef I40E_FCOE
 		if (unlikely(
@@ -1808,7 +1834,7 @@ static int i40e_clean_rx_irq(struct i40e_ring *rx_ring, int budget)
 		vlan_tag = (qword & BIT(I40E_RX_DESC_STATUS_L2TAG1P_SHIFT)) ?
 			   le16_to_cpu(rx_desc->wb.qword0.lo_dword.l2tag1) : 0;
 
-		i40e_receive_skb(rx_ring, skb, vlan_tag);
+		i40e_receive_skb(rx_ring, skb, vlan_tag, lpbk);
 
 		/* update budget accounting */
 		total_rx_packets++;
@@ -2346,6 +2372,27 @@ static int i40e_tso(struct sk_buff *skb, u8 *hdr_len, u64 *cd_type_cmd_tso_mss)
 }
 
 /**
+ * i40e_tvsi - set up the target vsi in TX context descriptor
+ * @tx_ring:  ptr to the target vsi
+ * @cd_type_cmd_tso_mss: Quad Word 1
+ *
+ * Returns 0
+ **/
+static int i40e_tvsi(struct i40e_vsi *tvsi, u64 *cd_type_cmd_tso_mss)
+{
+	u64 cd_cmd, cd_tvsi;
+
+	cd_cmd = I40E_TX_CTX_DESC_SWTCH_VSI;
+	cd_tvsi = tvsi->id;
+	cd_tvsi = (cd_tvsi << I40E_TXD_CTX_QW1_VSI_SHIFT) &
+		   I40E_TXD_CTX_QW1_VSI_MASK;
+	*cd_type_cmd_tso_mss |= (cd_cmd << I40E_TXD_CTX_QW1_CMD_SHIFT) |
+				 cd_tvsi;
+
+	return 0;
+}
+
+/**
  * i40e_tsyn - set up the tsyn context descriptor
  * @tx_ring:  ptr to the ring to send
  * @skb:      ptr to the skb we're sending
@@ -2887,8 +2934,12 @@ static netdev_tx_t i40e_xmit_frame_ring(struct sk_buff *skb,
 					struct i40e_ring *tx_ring)
 {
 	u64 cd_type_cmd_tso_mss = I40E_TX_DESC_DTYPE_CONTEXT;
+	struct metadata_dst *md_dst = skb_metadata_dst(skb);
 	u32 cd_tunneling = 0, cd_l2tag2 = 0;
 	struct i40e_tx_buffer *first;
+	struct i40e_vsi *t_vsi = NULL;
+	struct i40e_vf *t_vf;
+	struct i40e_pf *pf;
 	u32 td_offset = 0;
 	u32 tx_flags = 0;
 	__be16 protocol;
@@ -2935,7 +2986,22 @@ static netdev_tx_t i40e_xmit_frame_ring(struct sk_buff *skb,
 	else if (protocol == htons(ETH_P_IPV6))
 		tx_flags |= I40E_TX_FLAGS_IPV6;
 
-	tso = i40e_tso(skb, &hdr_len, &cd_type_cmd_tso_mss);
+	/* If skb metadata dst points to a VF id, do a directed transmit to
+	 * that VSI. TSO is mutually exclusive with this option. So TSO is not
+	 * enabled when doing a directed transmit.
+	 */
+	if (md_dst && (md_dst->type == METADATA_HW_PORT_MUX)) {
+		pf = tx_ring->vsi->back;
+		if (md_dst->u.port_info.port_id < pf->num_alloc_vfs) {
+			t_vf = &pf->vf[md_dst->u.port_info.port_id];
+			t_vsi = pf->vsi[t_vf->lan_vsi_idx];
+		}
+	}
+
+	if (t_vsi)
+		tso = i40e_tvsi(t_vsi, &cd_type_cmd_tso_mss);
+	else
+		tso = i40e_tso(skb, &hdr_len, &cd_type_cmd_tso_mss);
 
 	if (tso < 0)
 		goto out_drop;
@@ -2998,3 +3064,19 @@ netdev_tx_t i40e_lan_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 
 	return i40e_xmit_frame_ring(skb, tx_ring);
 }
+
+netdev_tx_t i40e_vfpr_netdev_start_xmit(struct sk_buff *skb,
+				        struct net_device *dev)
+{
+	struct i40e_vfpr_netdev_priv *priv = netdev_priv(dev);
+	struct i40e_vf *vf = priv->vf;
+	struct i40e_pf *pf = vf->pf;
+	struct i40e_vsi *vsi = pf->vsi[pf->lan_vsi];
+
+	skb_dst_drop(skb);
+	dst_hold(&priv->vfpr_dst->dst);
+	skb_dst_set(skb, &priv->vfpr_dst->dst);
+	skb->dev = vsi->netdev;
+
+	return dev_queue_xmit(skb);
+}
diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.h b/drivers/net/ethernet/intel/i40e/i40e_txrx.h
index e065321..850723f 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.h
@@ -366,6 +366,7 @@ struct i40e_ring_container {
 
 bool i40e_alloc_rx_buffers(struct i40e_ring *rxr, u16 cleaned_count);
 netdev_tx_t i40e_lan_xmit_frame(struct sk_buff *skb, struct net_device *netdev);
+netdev_tx_t i40e_vfpr_netdev_start_xmit(struct sk_buff *skb, struct net_device *netdev);
 void i40e_clean_tx_ring(struct i40e_ring *tx_ring);
 void i40e_clean_rx_ring(struct i40e_ring *rx_ring);
 int i40e_setup_tx_descriptors(struct i40e_ring *tx_ring);
diff --git a/drivers/net/ethernet/intel/i40e/i40e_type.h b/drivers/net/ethernet/intel/i40e/i40e_type.h
index edc0abd..c136cc9 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_type.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_type.h
@@ -728,6 +728,9 @@ enum i40e_rx_desc_status_bits {
 #define I40E_RXD_QW1_STATUS_TSYNVALID_SHIFT  I40E_RX_DESC_STATUS_TSYNVALID_SHIFT
 #define I40E_RXD_QW1_STATUS_TSYNVALID_MASK \
 				    BIT_ULL(I40E_RXD_QW1_STATUS_TSYNVALID_SHIFT)
+#define I40E_RXD_QW1_STATUS_LPBK_SHIFT  I40E_RX_DESC_STATUS_LPBK_SHIFT
+#define I40E_RXD_QW1_STATUS_LPBK_MASK \
+				BIT_ULL(I40E_RXD_QW1_STATUS_LPBK_SHIFT)
 
 enum i40e_rx_desc_fltstat_values {
 	I40E_RX_DESC_FLTSTAT_NO_DATA	= 0,
diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index 3ea7235..e3fded1 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -1062,6 +1062,7 @@ static int i40e_vfpr_netdev_stop(struct net_device *dev)
 static const struct net_device_ops i40e_vfpr_netdev_ops = {
 	.ndo_open       	= i40e_vfpr_netdev_open,
 	.ndo_stop       	= i40e_vfpr_netdev_stop,
+	.ndo_start_xmit		= i40e_vfpr_netdev_start_xmit,
 };
 
 /**
@@ -1121,16 +1122,22 @@ int i40e_alloc_vfpr_netdev(struct i40e_vf *vf, u16 vf_num)
 
 	priv = netdev_priv(vfpr_netdev);
 	priv->vf = &(pf->vf[vf_num]);
+	priv->vfpr_dst = metadata_dst_alloc(0, METADATA_HW_PORT_MUX, GFP_KERNEL);
+	priv->vfpr_dst->u.port_info.lower_dev = vsi->netdev;
+	priv->vfpr_dst->u.port_info.port_id = vf->vf_id;
 
 	vfpr_netdev->netdev_ops = &i40e_vfpr_netdev_ops;
 
 	netif_carrier_off(vfpr_netdev);
 	netif_tx_disable(vfpr_netdev);
 
+	eth_hw_addr_inherit(vfpr_netdev, vsi->netdev);
+
 	err = register_netdev(vfpr_netdev);
 	if (err) {
 		dev_err(&pf->pdev->dev, "register_netdev failed for vf: %s\n",
 			vf->vfpr_netdev->name);
+		dst_release((struct dst_entry *)priv->vfpr_dst);
 		free_netdev(vfpr_netdev);
 		return err;
 	}
@@ -1159,14 +1166,18 @@ int i40e_alloc_vfpr_netdev(struct i40e_vf *vf, u16 vf_num)
  **/
 void i40e_free_vfpr_netdev(struct i40e_vf *vf)
 {
+	struct i40e_vfpr_netdev_priv *priv;
 	struct i40e_pf *pf = vf->pf;
 
 	if (!vf->vfpr_netdev)
 		return;
 
+	priv = netdev_priv(vf->vfpr_netdev);
+
 	dev_info(&pf->pdev->dev, "Freeing VF Port representor(%s)\n",
 		 vf->vfpr_netdev->name);
 
+	dst_release((struct dst_entry *)priv->vfpr_dst);
 	unregister_netdev(vf->vfpr_netdev);
 	free_netdev(vf->vfpr_netdev);
 
@@ -1933,8 +1944,10 @@ static int i40e_vc_enable_queues_msg(struct i40e_vf *vf, u8 *msg, u16 msglen)
 	if (i40e_vsi_start_rings(pf->vsi[vf->lan_vsi_idx]))
 		aq_ret = I40E_ERR_TIMEOUT;
 
-	if ((0 == aq_ret) && vf->vfpr_netdev)
+	if ((0 == aq_ret) && vf->vfpr_netdev) {
+		netif_tx_start_all_queues(vf->vfpr_netdev);
 		netif_carrier_on(vf->vfpr_netdev);
+	}
 
 error_param:
 	/* send the response to the VF */
@@ -1975,8 +1988,10 @@ static int i40e_vc_disable_queues_msg(struct i40e_vf *vf, u8 *msg, u16 msglen)
 
 	i40e_vsi_stop_rings(pf->vsi[vf->lan_vsi_idx]);
 
-	if ((0 == aq_ret) && vf->vfpr_netdev)
+	if ((0 == aq_ret) && vf->vfpr_netdev) {
+		netif_tx_stop_all_queues(vf->vfpr_netdev);
 		netif_carrier_off(vf->vfpr_netdev);
+	}
 
 error_param:
 	/* send the response to the VF */
diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h
index 1e5def1..3c3db8a 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h
@@ -74,6 +74,7 @@ enum i40e_vf_capabilities {
 
 /* VF Port representor netdev private structure */
 struct i40e_vfpr_netdev_priv {
+	struct metadata_dst *vfpr_dst;
 	struct i40e_vf *vf;
 };
 
-- 
2.5.5

Re: [net-next PATCH 5/6] i40e: Add TX and RX support in switchdev mode.

[Or Gerlitz]

On Fri, Dec 30, 2016 at 8:21 AM, Sridhar Samudrala
<sridhar.samudrala@intel.com> wrote:
> In switchdev mode, broadcast filter is not enabled on VFs, The broadcasts and

nit ", The broadcast" --> ", the broadcasts" or ". The broadcasts"

> unknown frames from VFs are received by the PF and passed to corresponding VF
> port representator netdev.
> A host based switching entity like a linux bridge or OVS redirects these frames
> to the right VFs via VFPR netdevs. Any frames sent via VFPR netdevs are sent as
> directed transmits to the corresponding VFs. To enable directed transmit, skb
> metadata dst is used to pass the VF id and the frame is requeued to call the PFs
> transmit routine.

So the representator netdevs do or don't have TX/RX rings of their
own? if the latter, was there any special locking you had to do for
that?

Are you exposing switchdev ops for the representators? didn't see that
or maybe it's in the 4th patch which didn't make it to the list?

Re: [net-next PATCH 5/6] i40e: Add TX and RX support in switchdev mode.

[Samudrala, Sridhar]

On 12/30/2016 7:31 AM, Or Gerlitz wrote:
> On Fri, Dec 30, 2016 at 8:21 AM, Sridhar Samudrala
> <sridhar.samudrala@intel.com> wrote:
>> In switchdev mode, broadcast filter is not enabled on VFs, The broadcasts and
> nit ", The broadcast" --> ", the broadcasts" or ". The broadcasts"
>
>> unknown frames from VFs are received by the PF and passed to corresponding VF
>> port representator netdev.
>> A host based switching entity like a linux bridge or OVS redirects these frames
>> to the right VFs via VFPR netdevs. Any frames sent via VFPR netdevs are sent as
>> directed transmits to the corresponding VFs. To enable directed transmit, skb
>> metadata dst is used to pass the VF id and the frame is requeued to call the PFs
>> transmit routine.
> So the representator netdevs do or don't have TX/RX rings of their
> own? if the latter, was there any special locking you had to do for
> that?
Atleast in the inital implementation,  we are not creating any TX/RX 
rings for VFPR netdevs.
skb->dev is set to the PF device  and skb is requeued via dev_queue_xmit().


>
> Are you exposing switchdev ops for the representators? didn't see that
> or maybe it's in the 4th patch which didn't make it to the list?
Not at this time. In the future patches when we offload fdb/vlan 
functionality, we could use
switchdev ops.

Re: [net-next PATCH 5/6] i40e: Add TX and RX support in switchdev mode.

[Or Gerlitz]

On Fri, Dec 30, 2016 at 7:04 PM, Samudrala, Sridhar
<sridhar.samudrala@intel.com> wrote:
> On 12/30/2016 7:31 AM, Or Gerlitz wrote:

>> Are you exposing switchdev ops for the representators? didn't see that
>> or maybe it's in the 4th patch which didn't make it to the list?

> Not at this time. In the future patches when we offload fdb/vlan
> functionality, we could use switchdev ops.

but wait, this is the switchdev mode... even before doing any
offloading, you want (need) your representor netdevices to have the
same HW ID marking they are all ports of the same ASIC, this you can
do with the switchdev parent ID attribute.

Re: [net-next PATCH 5/6] i40e: Add TX and RX support in switchdev mode.

[Samudrala, Sridhar]

On 1/3/2017 3:03 PM, Or Gerlitz wrote:
> On Fri, Dec 30, 2016 at 7:04 PM, Samudrala, Sridhar
> <sridhar.samudrala@intel.com> wrote:
>> On 12/30/2016 7:31 AM, Or Gerlitz wrote:
>>> Are you exposing switchdev ops for the representators? didn't see that
>>> or maybe it's in the 4th patch which didn't make it to the list?
>> Not at this time. In the future patches when we offload fdb/vlan
>> functionality, we could use switchdev ops.
> but wait, this is the switchdev mode... even before doing any
> offloading, you want (need) your representor netdevices to have the
> same HW ID marking they are all ports of the same ASIC, this you can
> do with the switchdev parent ID attribute.
OK. I will add switchdev_port_attr_get() with PORT_PARENT_ID support in v3.

Thanks
Sridhar

Re: [net-next PATCH 5/6] i40e: Add TX and RX support in switchdev mode.

[Or Gerlitz]

On Thu, Jan 5, 2017 at 12:46 AM, Samudrala, Sridhar
<sridhar.samudrala@intel.com> wrote:
>
>
> On 1/3/2017 3:03 PM, Or Gerlitz wrote:
>>
>> On Fri, Dec 30, 2016 at 7:04 PM, Samudrala, Sridhar
>> <sridhar.samudrala@intel.com> wrote:
>>>
>>> On 12/30/2016 7:31 AM, Or Gerlitz wrote:
>>>>
>>>> Are you exposing switchdev ops for the representators? didn't see that
>>>> or maybe it's in the 4th patch which didn't make it to the list?
>>>
>>> Not at this time. In the future patches when we offload fdb/vlan
>>> functionality, we could use switchdev ops.
>>
>> but wait, this is the switchdev mode... even before doing any
>> offloading, you want (need) your representor netdevices to have the
>> same HW ID marking they are all ports of the same ASIC, this you can
>> do with the switchdev parent ID attribute.
>
> OK. I will add switchdev_port_attr_get() with PORT_PARENT_ID support in v3.

Good, I made this comment, b/c we want to create a well defined user-experience
to be taken into account also by upper virtualization layers.

Another piece there to add is have your VF reps implement the
get_phys_port_name ndo,
where as we explain in commit cb67b832921cfa20ad79bafdc51f1745339d0557 is used
as follows:

    Port phys name (ndo_get_phys_port_name) is implemented to allow exporting
    to user-space the VF vport number and along with the switchdev port parent
    id (phys_switch_id) enable a udev base consistent naming scheme:

    SUBSYSTEM=="net", ACTION=="add", ATTR{phys_switch_id}=="<phys_switch_id>", \
            ATTR{phys_port_name}!="", NAME="$PF_NIC$attr{phys_port_name}"

    where phys_switch_id is exposed by the PF (and VF reps) and $PF_NIC is
    the name of the PF netdevice.

Or.

Re: [net-next PATCH 5/6] i40e: Add TX and RX support in switchdev mode.

[Samudrala, Sridhar]

On 1/5/2017 3:50 AM, Or Gerlitz wrote:
> On Thu, Jan 5, 2017 at 12:46 AM, Samudrala, Sridhar
> <sridhar.samudrala@intel.com> wrote:
>>
>> On 1/3/2017 3:03 PM, Or Gerlitz wrote:
>>> On Fri, Dec 30, 2016 at 7:04 PM, Samudrala, Sridhar
>>> <sridhar.samudrala@intel.com> wrote:
>>>> On 12/30/2016 7:31 AM, Or Gerlitz wrote:
>>>>> Are you exposing switchdev ops for the representators? didn't see that
>>>>> or maybe it's in the 4th patch which didn't make it to the list?
>>>> Not at this time. In the future patches when we offload fdb/vlan
>>>> functionality, we could use switchdev ops.
>>> but wait, this is the switchdev mode... even before doing any
>>> offloading, you want (need) your representor netdevices to have the
>>> same HW ID marking they are all ports of the same ASIC, this you can
>>> do with the switchdev parent ID attribute.
>> OK. I will add switchdev_port_attr_get() with PORT_PARENT_ID support in v3.
> Good, I made this comment, b/c we want to create a well defined user-experience
> to be taken into account also by upper virtualization layers.
>
> Another piece there to add is have your VF reps implement the
> get_phys_port_name ndo,

It looks like you are returning the VF port number as phys_port_name() 
for a VF rep in en_rep.c.
Is this correct?

By default i am creating VFPR netdev with name as <pf_name>_VF<vf_num>
For ex; if enp5s0f0 is the pf name, VFPR netdev for VF0 will be enp5s0f0_vf0

If we want udev to follow this syntax should i return '_vf0'  as 
get_phys_port_name() for VF rep 0?

> where as we explain in commit cb67b832921cfa20ad79bafdc51f1745339d0557 is used
> as follows:
>
>      Port phys name (ndo_get_phys_port_name) is implemented to allow exporting
>      to user-space the VF vport number and along with the switchdev port parent
>      id (phys_switch_id) enable a udev base consistent naming scheme:
>
>      SUBSYSTEM=="net", ACTION=="add", ATTR{phys_switch_id}=="<phys_switch_id>", \
>              ATTR{phys_port_name}!="", NAME="$PF_NIC$attr{phys_port_name}"
>
>      where phys_switch_id is exposed by the PF (and VF reps) and $PF_NIC is
>      the name of the PF netdevice.
>
> Or.

Re: [net-next PATCH 5/6] i40e: Add TX and RX support in switchdev mode.

[Or Gerlitz]

On Fri, Jan 6, 2017 at 12:32 AM, Samudrala, Sridhar
<sridhar.samudrala@intel.com> wrote:
> On 1/5/2017 3:50 AM, Or Gerlitz wrote:

> It looks like you are returning the VF port number as phys_port_name() for a
> VF rep in en_rep.c. Is this correct?

yeah, correct, what we all call the VF rep actually represents the
eswitch vport the VF is connected to. The most flexible input for user
space would be just to get this port number along with the switchdev
ID which tells them to which switch this port belongs.

> By default i am creating VFPR netdev with name as <pf_name>_VF<vf_num>
> For ex; if enp5s0f0 is the pf name, VFPR netdev for VF0 will be enp5s0f0_vf0
>
> If we want udev to follow this syntax should i return '_vf0'  as
> get_phys_port_name() for VF rep 0?

just return a number. Typically the PF is vport #0, so for vf0 you
would return 1, this is aligned with the kernel switchdev
documentation [1]

Or.

[1] http://lxr.free-electrons.com/source/Documentation/networking/switchdev.txt#L104

[net-next PATCH 6/6] i40e: Add support for exposing VF port statistics via VFPR netdev on the host.

[Sridhar Samudrala]

By default stats counted by HW are returned via the original ndo_get_stats64()
api. Stats counted in SW are returned via ndo_get_offload_stats() api.

Small script to demonstrate vfpr stats in switchdev mode.
PF: enp5s0f0, VFs: enp5s2,enp5s2f1 VFPRs:enp5s0f0-vf0, enp5s0f0-vf1

# rmmod i40e; modprobe i40e
# devlink dev eswitch set pci/0000:05:00.0 mode switchdev
# echo 2 > /sys/class/net/enp5s0f0/device/sriov_numvfs
# ip link set enp5s0f0 vf 0 mac 00:11:22:33:44:55
# ip link set enp5s0f0 vf 1 mac 00:11:22:33:44:56
# rmmod i40evf; modprobe i40evf

/* Create 2 namespaces and move the VFs to
# ip netns add ns0
# ip link set enp5s2 netns ns0
# ip netns exec ns0 ip addr add 192.168.1.10/24 dev enp5s2
# ip netns exec ns0 ip link set enp5s2 up
# ip netns add ns1
# ip link set enp5s2f1 netns ns1
# ip netns exec ns1 ip addr add 192.168.1.11/24 dev enp5s2f1
# ip netns exec ns1 ip link set enp5s2f1 up

/* bring up pf and vfpr netdevs */
# ip link set enp5s0f0 up
# ip link set enp5s0f0-vf0 up
# ip link set enp5s0f0-vf1 up

/* Create a linux bridge and add vfpr netdevs to it. */
# ip link add vfpr-br type bridge
# ip link set enp5s0f0-vf0 master vfpr-br
# ip link set enp5s0f0-vf1 master vfpr-br
# ip addr add 192.168.1.1/24 dev vfpr-br
# ip link set vfpr-br up

# ip netns exec ns0 ping -c3 192.168.1.11
# ip netns exec ns1 ping -c3 192.168.1.10

# ip netns exec ns0 ip -s l show enp5s2
56: enp5s2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
    link/ether 00:11:22:33:44:55 brd ff:ff:ff:ff:ff:ff
    RX: bytes  packets  errors  dropped overrun mcast
    1468       18       0       0       0       0
    TX: bytes  packets  errors  dropped carrier collsns
    1398       17       0       0       0       0
# ip -s l show enp5s0f0-vf0
52: enp5s0f0-vf0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel master vfpr-br state UP mode DEFAULT group default qlen 1000
    link/ether 68:05:ca:2e:72:68 brd ff:ff:ff:ff:ff:ff
    RX: bytes  packets  errors  dropped overrun mcast
    1398       17       0       0       0       0
    TX: bytes  packets  errors  dropped carrier collsns
    1468       18       0       0       0       0
# ip netns exec ns1 ip -s l show enp5s2f1
57: enp5s2f1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
    link/ether 00:11:22:33:44:56 brd ff:ff:ff:ff:ff:ff
    RX: bytes  packets  errors  dropped overrun mcast
    1486       18       0       0       0       0
    TX: bytes  packets  errors  dropped carrier collsns
    1538       19       0       0       0       0
# ip -s l show enp5s0f0-vf1
53: enp5s0f0-vf1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel master vfpr-br state UP mode DEFAULT group default qlen 1000
    link/ether 68:05:ca:2e:72:68 brd ff:ff:ff:ff:ff:ff
    RX: bytes  packets  errors  dropped overrun mcast
    1538       19       0       0       0       0
    TX: bytes  packets  errors  dropped carrier collsns
    1486       18       0       0       0       0

Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_txrx.c        |  44 +++++++-
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 111 +++++++++++++++++++++
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h |  10 ++
 3 files changed, 163 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index b46ddaa..9f04337 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -1172,6 +1172,32 @@ static bool i40e_alloc_mapped_page(struct i40e_ring *rx_ring,
 }
 
 /**
+ * i40e_vfpr_receive_skb
+ * @vf: pointer to VF
+ * @skb: packet to send up
+ *
+ * Update skb dev to vfpr netdev and rx stats.
+ **/
+static void i40e_vfpr_receive_skb(struct i40e_vf *vf, struct sk_buff *skb)
+{
+	struct i40e_vfpr_netdev_priv *priv;
+	struct vfpr_pcpu_stats *vfpr_stats;
+
+	if (!vf->vfpr_netdev)
+		return;
+
+	skb->dev = vf->vfpr_netdev;
+
+	priv = netdev_priv(vf->vfpr_netdev);
+	vfpr_stats = this_cpu_ptr(priv->vfpr_stats);
+
+	u64_stats_update_begin(&vfpr_stats->syncp);
+	vfpr_stats->rx_packets++;
+	vfpr_stats->rx_bytes += skb->len;
+	u64_stats_update_end(&vfpr_stats->syncp);
+}
+
+/**
  * i40e_receive_skb - Send a completed packet up the stack
  * @rx_ring:  rx ring in play
  * @skb: packet to send up
@@ -1201,7 +1227,7 @@ static void i40e_receive_skb(struct i40e_ring *rx_ring,
 	for (vf_id = 0; vf_id < pf->num_alloc_vfs; vf_id++) {
 		vf = &pf->vf[vf_id];
 		if (ether_addr_equal(eth->h_source, vf->default_lan_addr.addr)) {
-			skb->dev = vf->vfpr_netdev;
+			i40e_vfpr_receive_skb(vf, skb);
 			break;
 		}
 	}
@@ -3072,11 +3098,25 @@ netdev_tx_t i40e_vfpr_netdev_start_xmit(struct sk_buff *skb,
 	struct i40e_vf *vf = priv->vf;
 	struct i40e_pf *pf = vf->pf;
 	struct i40e_vsi *vsi = pf->vsi[pf->lan_vsi];
+	int ret;
 
 	skb_dst_drop(skb);
 	dst_hold(&priv->vfpr_dst->dst);
 	skb_dst_set(skb, &priv->vfpr_dst->dst);
 	skb->dev = vsi->netdev;
 
-	return dev_queue_xmit(skb);
+	ret = dev_queue_xmit(skb);
+
+	if (likely(ret == NET_XMIT_SUCCESS || ret == NET_XMIT_CN)) {
+		struct vfpr_pcpu_stats *vfpr_stats = this_cpu_ptr(priv->vfpr_stats);
+
+		u64_stats_update_begin(&vfpr_stats->syncp);
+		vfpr_stats->tx_packets++;
+		vfpr_stats->tx_bytes += skb->len;
+		u64_stats_update_end(&vfpr_stats->syncp);
+	} else {
+		this_cpu_inc(priv->vfpr_stats->tx_drops);
+	}
+
+	return ret;
 }
diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index e3fded1..d4a1763 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -1059,10 +1059,113 @@ static int i40e_vfpr_netdev_stop(struct net_device *dev)
 	return 0;
 }
 
+/**
+ * i40e_vfpr_netdev_get_stats64
+ * @dev: network interface device structure
+ * @stats: netlink stats structure
+ *
+ * Returns the hw statistics from the VSI corresponding to the associated VFPR
+ **/
+static struct rtnl_link_stats64 *
+i40e_vfpr_netdev_get_stats64(struct net_device *netdev,
+			     struct rtnl_link_stats64 *stats)
+{
+	struct i40e_vfpr_netdev_priv *priv = netdev_priv(netdev);
+	struct i40e_vf *vf = priv->vf;
+	struct i40e_pf *pf = vf->pf;
+	struct i40e_vsi *vsi;
+	struct i40e_eth_stats *estats;
+
+	vsi = pf->vsi[vf->lan_vsi_idx];
+	i40e_update_stats(vsi);
+
+	estats = &vsi->eth_stats;
+
+	/* TX and RX stats are flipped as we are returning the stats as seen
+	 * at the switch port correspoding to the VF.
+	 */
+	stats->rx_packets = estats->tx_unicast + estats->tx_multicast +
+			    estats->tx_broadcast;
+	stats->tx_packets = estats->rx_unicast + estats->rx_multicast +
+			    estats->rx_broadcast;
+	stats->rx_bytes = estats->tx_bytes;
+	stats->tx_bytes = estats->rx_bytes;
+	stats->rx_dropped = estats->tx_discards;
+	stats->tx_dropped = estats->rx_discards;
+
+	return stats;
+}
+
+
+/**
+ * i40e_vfpr_get_cpu_hit_stats64
+ * @dev: network interface device structure
+ * @stats: netlink stats structure
+ *
+ * stats are filled from the priv structure. correspond to the packets
+ * that are seen by the cpu and sent/received via vfpr netdev.
+ **/
+static int
+i40e_vfpr_get_cpu_hit_stats64(const struct net_device *dev,
+			      struct rtnl_link_stats64 *stats)
+{
+	struct i40e_vfpr_netdev_priv *priv = netdev_priv(dev);
+	int i;
+
+	for_each_possible_cpu(i) {
+		struct vfpr_pcpu_stats *vfpr_stats;
+		u64 tbytes, tpkts, tdrops, rbytes, rpkts;
+		unsigned int start;
+
+		vfpr_stats = per_cpu_ptr(priv->vfpr_stats, i);
+		do {
+			start = u64_stats_fetch_begin_irq(&vfpr_stats->syncp);
+			tbytes = vfpr_stats->tx_bytes;
+			tpkts = vfpr_stats->tx_packets;
+			tdrops = vfpr_stats->tx_drops;
+			rbytes = vfpr_stats->rx_bytes;
+			rpkts = vfpr_stats->rx_packets;
+		} while (u64_stats_fetch_retry_irq(&vfpr_stats->syncp, start));
+		stats->tx_bytes += tbytes;
+		stats->tx_packets += tpkts;
+		stats->tx_dropped += tdrops;
+		stats->rx_bytes += rbytes;
+		stats->rx_packets += rpkts;
+	}
+
+	return 0;
+}
+
+static bool
+i40e_vfpr_netdev_has_offload_stats(const struct net_device *dev, int attr_id)
+{
+	switch (attr_id) {
+	case IFLA_OFFLOAD_XSTATS_CPU_HIT:
+		return true;
+	}
+
+	return false;
+}
+
+static int
+i40e_vfpr_netdev_get_offload_stats(int attr_id, const struct net_device *dev,
+				   void *sp)
+{
+	switch (attr_id) {
+	case IFLA_OFFLOAD_XSTATS_CPU_HIT:
+		return i40e_vfpr_get_cpu_hit_stats64(dev, sp);
+	}
+
+	return -EINVAL;
+}
+
 static const struct net_device_ops i40e_vfpr_netdev_ops = {
 	.ndo_open       	= i40e_vfpr_netdev_open,
 	.ndo_stop       	= i40e_vfpr_netdev_stop,
 	.ndo_start_xmit		= i40e_vfpr_netdev_start_xmit,
+	.ndo_get_stats64	= i40e_vfpr_netdev_get_stats64,
+	.ndo_has_offload_stats	= i40e_vfpr_netdev_has_offload_stats,
+	.ndo_get_offload_stats	= i40e_vfpr_netdev_get_offload_stats,
 };
 
 /**
@@ -1121,6 +1224,13 @@ int i40e_alloc_vfpr_netdev(struct i40e_vf *vf, u16 vf_num)
 	pf->vf[vf_num].vfpr_netdev = vfpr_netdev;
 
 	priv = netdev_priv(vfpr_netdev);
+	priv->vfpr_stats = netdev_alloc_pcpu_stats(struct vfpr_pcpu_stats);
+	if (!priv->vfpr_stats) {
+		dev_err(&pf->pdev->dev, "alloc_pcpu_stats failed for vf:%d\n",
+			vf_num);
+		free_netdev(vfpr_netdev);
+		return -ENOMEM;
+	}
 	priv->vf = &(pf->vf[vf_num]);
 	priv->vfpr_dst = metadata_dst_alloc(0, METADATA_HW_PORT_MUX, GFP_KERNEL);
 	priv->vfpr_dst->u.port_info.lower_dev = vsi->netdev;
@@ -1178,6 +1288,7 @@ void i40e_free_vfpr_netdev(struct i40e_vf *vf)
 		 vf->vfpr_netdev->name);
 
 	dst_release((struct dst_entry *)priv->vfpr_dst);
+	free_percpu(priv->vfpr_stats);
 	unregister_netdev(vf->vfpr_netdev);
 	free_netdev(vf->vfpr_netdev);
 
diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h
index 3c3db8a..faa6ea7 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h
@@ -72,10 +72,20 @@ enum i40e_vf_capabilities {
 	I40E_VIRTCHNL_VF_CAP_IWARP,
 };
 
+struct vfpr_pcpu_stats {
+	u64			tx_packets;
+	u64			tx_bytes;
+	u64			tx_drops;
+	u64			rx_packets;
+	u64 			rx_bytes;
+	struct u64_stats_sync	syncp;
+};
+
 /* VF Port representor netdev private structure */
 struct i40e_vfpr_netdev_priv {
 	struct metadata_dst *vfpr_dst;
 	struct i40e_vf *vf;
+	struct vfpr_pcpu_stats *vfpr_stats;
 };
 
 /* VF information structure */
-- 
2.5.5