Re: [next-queue v6 PATCH 5/7] i40e: Add TX and RX support over port netdev's in switchdev mode

["Samudrala, Sridhar" <sridhar.samudrala@intel.com>]

On 3/30/2017 2:26 AM, Or Gerlitz wrote:
> On Thu, Mar 30, 2017 at 3:22 AM, Sridhar Samudrala
> <sridhar.samudrala@intel.com> wrote:
>> Any frames sent via port netdevs are sent as directed transmits to the
>> corresponding VFs.
> okay, cool
>
>> In switchdev mode, broadcasts from VFs are received by the PF and passed
>> to corresponding port representor netdev.
> not following.
>
> If a VF sends a packet and it doesn't match any HW steering rule, then
> it has to meet some default rule. Such rule can be fwd to host CPU or drop
> or something else.
>
> E.g in mlx5 currently it's fwd to CPU --> the packet is delivered to
> the HW queue
> of the corresponding VF rep is received into the host networking stack
> from there
> (the VF rep does netif_rx).
fwd to CPU as default rule is not possible with the current generation 
of hw/fw.
So we would like to enable switchdev to expose the port representors and 
start
adding offloads in an incremental way.

>
> In this series you are not doing any offloading, right? so 100% of the packets
> sent by VFs should meet your default rule which I assume you want to be
> fwd to host CPU (--> vf rep)
>
> Is that broadcast a special case which will remain in place also when you
> add fdb/tc offloading? why not let the HW steering configuration for all types
> of traffic be dictated by offloading some SW switching rules?
>
> FWIW - I will not be online till Tues, so will see you reply only then
>
> Or.