Re: [PATCH] net: fec: fix probing of fec1 when fec0 is not probed yet

[Alexander Stein <alexander.stein@ew.tq-group.com>]

Hello Heiko,

Am Donnerstag, 23. November 2023, 14:27:43 CET schrieb Heiko Schocher:
> it is possible that fec1 is probed before fec0. On SoCs
> with FEC_QUIRK_SINGLE_MDIO set (which means fec1 uses mii
> from fec0) init of mii fails for fec1 when fec0 is not yet
> probed, as fec0 setups mii bus. In this case fec_enet_mii_init
> for fec1 returns with -ENODEV, and so fec1 never comes up.
> 
> Return here with -EPROBE_DEFER so interface gets later
> probed again.
> 
> Found this on imx8qxp based board, using 2 ethernet interfaces,
> and from time to time, fec1 interface came not up.

But FEC_QUIRK_SINGLE_MDIO is only set for imx28. How is this related to 
imx8qxp?
Will this also help for imx6ul when fec1 is almost always probed before fec0 
due to order of DT nodes?

Best regards,
Alexander

> Signed-off-by: Heiko Schocher <hs@denx.de>
> ---
> 
>  drivers/net/ethernet/freescale/fec_main.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/net/ethernet/freescale/fec_main.c
> b/drivers/net/ethernet/freescale/fec_main.c index
> c3b7694a7485..d956f95e7a65 100644
> --- a/drivers/net/ethernet/freescale/fec_main.c
> +++ b/drivers/net/ethernet/freescale/fec_main.c
> @@ -2445,7 +2445,7 @@ static int fec_enet_mii_init(struct platform_device
> *pdev) mii_cnt++;
>  			return 0;
>  		}
> -		return -ENOENT;
> +		return -EPROBE_DEFER;
>  	}
> 
>  	bus_freq = 2500000; /* 2.5MHz by default */


-- 
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/