Netdev List
 help / color / mirror / Atom feed
From: Matthias Brugger <matthias.bgg@gmail.com>
To: netdev@vger.kernel.org
Cc: netdev@vger.kernel.org, charles.chenxin@huawei.com, linuxarm@huawei.com
Subject: Re: [PATCH net-next 2/3] net: hns: support deferred probe when no mdio
Date: Thu, 20 Apr 2017 13:13:07 +0200	[thread overview]
Message-ID: <5c299e38-88f0-9801-5e7b-477e6fa0db18@gmail.com> (raw)
In-Reply-To: <1492510354-11300-3-git-send-email-yankejian@huawei.com>

On 18/04/17 12:12, Yankejian wrote:
> From: lipeng <lipeng321@huawei.com>
>
> In the hip06 and hip07 SoCs, phy connect to mdio bus.The mdio
> module is probed with module_init, and, as such,
> is not guaranteed to probe before the HNS driver. So we need
> to support deferred probe.
>
> We check for probe deferral in the mac init, so we not init DSAF
> when there is no mdio, and free all resource, to later learn that
> we need to defer the probe.
>
> Signed-off-by: lipeng <lipeng321@huawei.com>

on which kernel version is this patch based?
I checked against next-20170420 and it does not apply.


> ---
>  drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c | 34 +++++++++++++++++++----
>  1 file changed, 28 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c
> index bdd8cdd..284ebfe 100644
> --- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c
> +++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c
> @@ -735,6 +735,8 @@ static int hns_mac_init_ex(struct hns_mac_cb *mac_cb)
>  	rc = phy_device_register(phy);
>  	if (rc) {
>  		phy_device_free(phy);
> +		dev_err(&mdio->dev, "registered phy fail at address %i\n",
> +			addr);
>  		return -ENODEV;
>  	}
>
> @@ -745,7 +747,7 @@ static int hns_mac_init_ex(struct hns_mac_cb *mac_cb)
>  	return 0;
>  }
>
> -static void hns_mac_register_phy(struct hns_mac_cb *mac_cb)
> +static int hns_mac_register_phy(struct hns_mac_cb *mac_cb)
>  {
>  	struct acpi_reference_args args;
>  	struct platform_device *pdev;
> @@ -755,24 +757,39 @@ static void hns_mac_register_phy(struct hns_mac_cb *mac_cb)
>
>  	/* Loop over the child nodes and register a phy_device for each one */
>  	if (!to_acpi_device_node(mac_cb->fw_port))
> -		return;
> +		return 0;

Please return appropriate errno.

>
>  	rc = acpi_node_get_property_reference(
>  			mac_cb->fw_port, "mdio-node", 0, &args);
>  	if (rc)
> -		return;
> +		return 0;

Please return appropriate errno.

>
>  	addr = hns_mac_phy_parse_addr(mac_cb->dev, mac_cb->fw_port);
>  	if (addr < 0)
> -		return;
> +		return 0;

Shouldn't we just error out here by returning addr?

>
>  	/* dev address in adev */
>  	pdev = hns_dsaf_find_platform_device(acpi_fwnode_handle(args.adev));
> +	if (!pdev) {
> +		dev_err(mac_cb->dev, "mac%d mdio pdev is NULL\n",
> +			mac_cb->mac_id);
> +		return 0;

Please return appropriate errno.

Regards,
Matthias

> +	}
> +
>  	mii_bus = platform_get_drvdata(pdev);
> +	if (!mii_bus) {
> +		dev_err(mac_cb->dev,
> +			"mac%d mdio is NULL, dsaf will probe again later\n",
> +			mac_cb->mac_id);
> +		return -EPROBE_DEFER;
> +	}
> +
>  	rc = hns_mac_register_phydev(mii_bus, mac_cb, addr);
>  	if (!rc)
>  		dev_dbg(mac_cb->dev, "mac%d register phy addr:%d\n",
>  			mac_cb->mac_id, addr);
> +
> +	return rc;
>  }
>
>  #define MAC_MEDIA_TYPE_MAX_LEN		16
> @@ -793,7 +810,7 @@ static void hns_mac_register_phy(struct hns_mac_cb *mac_cb)
>   *@np:device node
>   * return: 0 --success, negative --fail
>   */
> -static int  hns_mac_get_info(struct hns_mac_cb *mac_cb)
> +static int hns_mac_get_info(struct hns_mac_cb *mac_cb)
>  {
>  	struct device_node *np;
>  	struct regmap *syscon;
> @@ -903,7 +920,10 @@ static int  hns_mac_get_info(struct hns_mac_cb *mac_cb)
>  			}
>  		}
>  	} else if (is_acpi_node(mac_cb->fw_port)) {
> -		hns_mac_register_phy(mac_cb);
> +		ret = hns_mac_register_phy(mac_cb);
> +
> +		if (ret)
> +			return ret;
>  	} else {
>  		dev_err(mac_cb->dev, "mac%d cannot find phy node\n",
>  			mac_cb->mac_id);
> @@ -1065,6 +1085,7 @@ int hns_mac_init(struct dsaf_device *dsaf_dev)
>  			dsaf_dev->mac_cb[port_id] = mac_cb;
>  		}
>  	}
> +
>  	/* init mac_cb for all port */
>  	for (port_id = 0; port_id < max_port_num; port_id++) {
>  		mac_cb = dsaf_dev->mac_cb[port_id];
> @@ -1074,6 +1095,7 @@ int hns_mac_init(struct dsaf_device *dsaf_dev)
>  		ret = hns_mac_get_cfg(dsaf_dev, mac_cb);
>  		if (ret)
>  			return ret;
> +
>  		ret = hns_mac_init_ex(mac_cb);
>  		if (ret)
>  			return ret;
>

  reply	other threads:[~2017-04-20 11:13 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-04-18 10:12 [PATCH net-next 0/3] net: hns: add deferred probe and fix a bug Yankejian
2017-04-18 10:12 ` [PATCH net-next 1/3] net: hns: support deferred probe when can not obtain irq Yankejian
2017-04-18 10:12 ` [PATCH net-next 2/3] net: hns: support deferred probe when no mdio Yankejian
2017-04-20 11:13   ` Matthias Brugger [this message]
2017-04-21  7:18     ` lipeng (Y)
2017-04-18 10:12 ` [PATCH net-next 3/3] net: hns: fixed bug that skb used after kfree Yankejian

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5c299e38-88f0-9801-5e7b-477e6fa0db18@gmail.com \
    --to=matthias.bgg@gmail.com \
    --cc=charles.chenxin@huawei.com \
    --cc=linuxarm@huawei.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox