From: Vadim Fedorenko <vadim.fedorenko@linux.dev>
To: James Clark <jjc@jclark.com>,
Maxime Chevallier <maxime.chevallier@bootlin.com>,
netdev@vger.kernel.org
Cc: Andrew Lunn <andrew+netdev@lunn.ch>,
"David S . Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@kernel.org>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Richard Cochran <richardcochran@gmail.com>,
Miroslav Lichvar <mlichvar@redhat.com>,
Nicolai Buchwitz <nb@tipi-net.de>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH net-next v2] net: stmmac: ptp: switch to gettimex64() interface
Date: Tue, 13 Oct 2026 11:43:11 +0100 [thread overview]
Message-ID: <5c500376-0573-446d-81cf-70bc38ae4aea@linux.dev> (raw)
In-Reply-To: <20261008103809.1848255-1-jjc@jclark.com>
On 08/10/2026 11:38, James Clark wrote:
> The stmmac PTP support currently implements the gettime64 callback to
> retrieve the hardware clock time. Update the implementation to provide
> the gettimex64 callback instead, adding support for the
> PTP_SYS_OFFSET_EXTENDED ioctl.
>
> The system clock readings are taken around the read of the nanoseconds
> register in get_systime(), so get_systime() gains a ptp_system_timestamp
> argument.
>
> Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
> Assisted-by: LLM
> Signed-off-by: James Clark <jjc@jclark.com>
> ---
> Changes in v2:
> - Read PTP_STNSR with readl() and drop the two rmb() calls
> (Nicolai Buchwitz, Maxime Chevallier)
> - Fix the kernel-doc of stmmac_get_timex() and an over-long line
> in stmmac_adjust_time() (netdev CI)
> - Link to v1: https://lore.kernel.org/netdev/20261006103610.98277-1-jjc@jclark.com/
>
> Tested on a Radxa ZERO 3E (RK3566, DWMAC 4/5) running net-next.
> Width of the interval between the two system clock readings
> bracketing each PHC read (2000 calls of 25 samples each):
>
> min median
> Before patch (PTP_SYS_OFFSET): 875 ns 1167 ns
> After patch (PTP_SYS_OFFSET_EXTENDED): 291 ns 583 ns
>
> On this board the 24 MHz arch timer counter advances in steps of 7
> (~292 ns), so all intervals are multiples of that.
>
> drivers/net/ethernet/stmicro/stmmac/hwif.h | 5 ++++-
> .../ethernet/stmicro/stmmac/stmmac_hwtstamp.c | 7 +++++--
> .../net/ethernet/stmicro/stmmac/stmmac_ptp.c | 21 ++++++++++---------
> .../stmicro/stmmac/stmmac_selftests.c | 4 ++--
> .../net/ethernet/stmicro/stmmac/stmmac_tc.c | 3 ++-
> 5 files changed, 24 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/hwif.h b/drivers/net/ethernet/stmicro/stmmac/hwif.h
> index a8a5c8fdd5e..6efbfe50102 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/hwif.h
> +++ b/drivers/net/ethernet/stmicro/stmmac/hwif.h
> @@ -493,6 +493,8 @@ struct stmmac_ops {
> #define stmmac_fpe_map_preemption_class(__priv, __args...) \
> stmmac_do_callback(__priv, mac, fpe_map_preemption_class, __args)
>
> +struct ptp_system_timestamp;
> +
> /* PTP and HW Timer helpers */
> struct stmmac_hwtimestamp {
> void (*config_hw_tstamping) (void __iomem *ioaddr, u32 data);
> @@ -502,7 +504,8 @@ struct stmmac_hwtimestamp {
> int (*config_addend) (void __iomem *ioaddr, u32 addend);
> int (*adjust_systime) (void __iomem *ioaddr, u32 sec, u32 nsec,
> int add_sub, int gmac4);
> - void (*get_systime) (void __iomem *ioaddr, u64 *systime);
> + void (*get_systime)(void __iomem *ioaddr, u64 *systime,
> + struct ptp_system_timestamp *sts);
> void (*get_ptptime)(void __iomem *ioaddr, u64 *ptp_time);
> void (*timestamp_interrupt)(struct stmmac_priv *priv);
> void (*hwtstamp_correct_latency)(struct stmmac_priv *priv);
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c
> index b9a985fa772..870c740b4a5 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c
> @@ -183,7 +183,8 @@ static int adjust_systime(void __iomem *ioaddr, u32 sec, u32 nsec,
> 10, 100000);
> }
>
> -static void get_systime(void __iomem *ioaddr, u64 *systime)
> +static void get_systime(void __iomem *ioaddr, u64 *systime,
> + struct ptp_system_timestamp *sts)
> {
> u64 ns, sec0, sec1;
>
> @@ -191,8 +192,10 @@ static void get_systime(void __iomem *ioaddr, u64 *systime)
> sec1 = readl_relaxed(ioaddr + PTP_STSR);
> do {
> sec0 = sec1;
> + ptp_read_system_prets(sts);
> /* Get the TSSS value */
> - ns = readl_relaxed(ioaddr + PTP_STNSR);
> + ns = readl(ioaddr + PTP_STNSR);
> + ptp_read_system_postts(sts);
> /* Get the TSS value */
> sec1 = readl_relaxed(ioaddr + PTP_STSR);
> } while (sec0 != sec1);
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
> index 3bfcc9760dc..e54a3c88782 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
> @@ -89,7 +89,8 @@ static int stmmac_adjust_time(struct ptp_clock_info *ptp, s64 delta)
> u64 cycle_time;
>
> mutex_lock(&priv->est_lock);
> - priv->ptp_clock_ops.gettime64(&priv->ptp_clock_ops, ¤t_time);
> + priv->ptp_clock_ops.gettimex64(&priv->ptp_clock_ops,
> + ¤t_time, NULL);
> current_time_ns = timespec64_to_ktime(current_time);
> time.tv_nsec = priv->est->btr_reserve[0];
> time.tv_sec = priv->est->btr_reserve[1];
> @@ -114,15 +115,15 @@ static int stmmac_adjust_time(struct ptp_clock_info *ptp, s64 delta)
> }
>
> /**
> - * stmmac_get_time
> - *
> + * stmmac_get_timex - read the PTP clock, with system timestamps if requested
> * @ptp: pointer to ptp_clock_info structure
> * @ts: pointer to hold time/result
> + * @sts: pointer to hold system timestamps around the read, or NULL
> *
> - * Description: this function will read the current time from the
> - * hardware clock and store it in @ts.
> + * Return: 0
> */
> -static int stmmac_get_time(struct ptp_clock_info *ptp, struct timespec64 *ts)
> +static int stmmac_get_timex(struct ptp_clock_info *ptp, struct timespec64 *ts,
> + struct ptp_system_timestamp *sts)
> {
> struct stmmac_priv *priv =
> container_of(ptp, struct stmmac_priv, ptp_clock_ops);
> @@ -130,7 +131,7 @@ static int stmmac_get_time(struct ptp_clock_info *ptp, struct timespec64 *ts)
> u64 ns = 0;
>
> read_lock_irqsave(&priv->ptp_lock, flags);
> - stmmac_get_systime(priv, priv->ptpaddr, &ns);
> + stmmac_get_systime(priv, priv->ptpaddr, &ns, sts);
> read_unlock_irqrestore(&priv->ptp_lock, flags);
>
> *ts = ns_to_timespec64(ns);
> @@ -200,7 +201,7 @@ static int stmmac_enable(struct ptp_clock_info *ptp,
>
> target_ns = cfg->start.tv_nsec + ((u64)cfg->start.tv_sec * NSEC_PER_SEC);
>
> - stmmac_get_systime(priv, priv->ptpaddr, &ns);
> + stmmac_get_systime(priv, priv->ptpaddr, &ns, NULL);
> if (ns > TIME64_MAX - PTP_SAFE_TIME_OFFSET_NS)
> return -EINVAL;
>
> @@ -304,7 +305,7 @@ const struct ptp_clock_info stmmac_ptp_clock_ops = {
> .pps = 0,
> .adjfine = stmmac_adjust_freq,
> .adjtime = stmmac_adjust_time,
> - .gettime64 = stmmac_get_time,
> + .gettimex64 = stmmac_get_timex,
> .settime64 = stmmac_set_time,
> .enable = stmmac_enable,
> };
> @@ -321,7 +322,7 @@ const struct ptp_clock_info dwmac1000_ptp_clock_ops = {
> .pps = 0,
> .adjfine = stmmac_adjust_freq,
> .adjtime = stmmac_adjust_time,
> - .gettime64 = stmmac_get_time,
> + .gettimex64 = stmmac_get_timex,
> .settime64 = stmmac_set_time,
> .enable = dwmac1000_ptp_enable,
> };
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c
> index 6097f312fce..2ae4f0e760c 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c
> @@ -1778,7 +1778,7 @@ static int stmmac_test_tbs(struct stmmac_priv *priv)
> return ret;
>
> read_lock_irqsave(&priv->ptp_lock, flags);
> - stmmac_get_systime(priv, priv->ptpaddr, &curr_time);
> + stmmac_get_systime(priv, priv->ptpaddr, &curr_time, NULL);
> read_unlock_irqrestore(&priv->ptp_lock, flags);
>
> if (!curr_time) {
> @@ -1800,7 +1800,7 @@ static int stmmac_test_tbs(struct stmmac_priv *priv)
>
> /* Check if expected time has elapsed */
> read_lock_irqsave(&priv->ptp_lock, flags);
> - stmmac_get_systime(priv, priv->ptpaddr, &curr_time);
> + stmmac_get_systime(priv, priv->ptpaddr, &curr_time, NULL);
> read_unlock_irqrestore(&priv->ptp_lock, flags);
>
> if ((curr_time - start_time) < STMMAC_TBS_LT_OFFSET)
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
> index 42a00446e9b..57ebeb2c19c 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
> @@ -1070,7 +1070,8 @@ static int tc_taprio_configure(struct stmmac_priv *priv,
>
> mutex_lock(&priv->est_lock);
> /* Adjust for real system time */
> - priv->ptp_clock_ops.gettime64(&priv->ptp_clock_ops, ¤t_time);
> + priv->ptp_clock_ops.gettimex64(&priv->ptp_clock_ops, ¤t_time,
> + NULL);
> current_time_ns = timespec64_to_ktime(current_time);
> time = stmmac_calc_tas_basetime(qopt->base_time, current_time_ns,
> qopt->cycle_time);
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
next prev parent reply other threads:[~2026-10-13 10:43 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-08 10:38 [PATCH net-next v2] net: stmmac: ptp: switch to gettimex64() interface James Clark
2026-10-13 10:43 ` Vadim Fedorenko [this message]
2026-10-13 11:02 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5c500376-0573-446d-81cf-70bc38ae4aea@linux.dev \
--to=vadim.fedorenko@linux.dev \
--cc=alexandre.torgue@foss.st.com \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@kernel.org \
--cc=jjc@jclark.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=maxime.chevallier@bootlin.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=mlichvar@redhat.com \
--cc=nb@tipi-net.de \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=richardcochran@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox