From: Florian Fainelli <f.fainelli@gmail.com>
To: Ansuel Smith <ansuelsmth@gmail.com>, Andrew Lunn <andrew@lunn.ch>,
Vivien Didelot <vivien.didelot@gmail.com>,
Vladimir Oltean <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] net: dsa: qca8k: fix kernel panic with legacy mdio mapping
Date: Sat, 11 Sep 2021 08:31:51 -0700 [thread overview]
Message-ID: <5ec1a416-45e5-4679-9aa4-aa96b7f738b0@gmail.com> (raw)
In-Reply-To: <20210911150731.16586-1-ansuelsmth@gmail.com>
On 9/11/2021 08:07, Ansuel Smith wrote:
> When the mdio legacy mapping is used the mii_bus priv registred by DSA
typo: registered
> refer to the dsa switch struct instead of the qca8k_priv struct and
> cause a kernel panic.
typo: causes
> Create dedicated function when the internal
> dedicated mdio driver is used to proprely handle the 2 different
> implementation.
typo: properly
>
> Fixes: 759bafb8a322 ("net: dsa: qca8k: add support for internal phy and internal mdio")
> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> ---
> drivers/net/dsa/qca8k.c | 30 ++++++++++++++++++++++--------
> 1 file changed, 22 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
> index 1f63f50f73f1..a701323daf72 100644
> --- a/drivers/net/dsa/qca8k.c
> +++ b/drivers/net/dsa/qca8k.c
> @@ -643,10 +643,8 @@ qca8k_mdio_busy_wait(struct mii_bus *bus, u32 reg, u32 mask)
> }
>
> static int
> -qca8k_mdio_write(struct mii_bus *salve_bus, int phy, int regnum, u16 data)
> +qca8k_mdio_write(struct mii_bus *bus, int phy, int regnum, u16 data)
> {
> - struct qca8k_priv *priv = salve_bus->priv;
> - struct mii_bus *bus = priv->bus;
> u16 r1, r2, page;
> u32 val;
> int ret;
> @@ -682,10 +680,8 @@ qca8k_mdio_write(struct mii_bus *salve_bus, int phy, int regnum, u16 data)
> }
>
> static int
> -qca8k_mdio_read(struct mii_bus *salve_bus, int phy, int regnum)
> +qca8k_mdio_read(struct mii_bus *bus, int phy, int regnum)
> {
> - struct qca8k_priv *priv = salve_bus->priv;
> - struct mii_bus *bus = priv->bus;
> u16 r1, r2, page;
> u32 val;
> int ret;
> @@ -726,6 +722,24 @@ qca8k_mdio_read(struct mii_bus *salve_bus, int phy, int regnum)
> return ret;
> }
>
> +static int
> +qca8k_internal_mdio_write(struct mii_bus *salve_bus, int phy, int regnum, u16 data)
> +{
> + struct qca8k_priv *priv = salve_bus->priv;
You are only moving code here but while at it, mind fixing that typo?
> + struct mii_bus *bus = priv->bus;
> +
> + return qca8k_mdio_write(bus, phy, regnum, data);
> +}
> +
> +static int
> +qca8k_internal_mdio_read(struct mii_bus *salve_bus, int phy, int regnum)
> +{
> + struct qca8k_priv *priv = salve_bus->priv;
> + struct mii_bus *bus = priv->bus;
> +
> + return qca8k_mdio_read(bus, phy, regnum);
> +}
> +
> static int
> qca8k_phy_write(struct dsa_switch *ds, int port, int regnum, u16 data)
> {
> @@ -775,8 +789,8 @@ qca8k_mdio_register(struct qca8k_priv *priv, struct device_node *mdio)
>
> bus->priv = (void *)priv;
> bus->name = "qca8k slave mii";
> - bus->read = qca8k_mdio_read;
> - bus->write = qca8k_mdio_write;
> + bus->read = qca8k_internal_mdio_read;
> + bus->write = qca8k_internal_mdio_write;
> snprintf(bus->id, MII_BUS_ID_SIZE, "qca8k-%d",
> ds->index);
>
>
--
Florian
next prev parent reply other threads:[~2021-09-11 15:32 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-11 15:07 [PATCH] net: dsa: qca8k: fix kernel panic with legacy mdio mapping Ansuel Smith
2021-09-11 15:31 ` Florian Fainelli [this message]
2021-09-11 15:36 ` Ansuel Smith
2021-09-11 15:40 ` Vladimir Oltean
2021-09-11 15:44 ` Ansuel Smith
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5ec1a416-45e5-4679-9aa4-aa96b7f738b0@gmail.com \
--to=f.fainelli@gmail.com \
--cc=andrew@lunn.ch \
--cc=ansuelsmth@gmail.com \
--cc=davem@davemloft.net \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=vivien.didelot@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox