From mboxrd@z Thu Jan 1 00:00:00 1970 From: Florian Fainelli Subject: Re: [PATCH] net: arc_emac: switch to phy_start()/phy_stop() Date: Wed, 19 Apr 2017 14:08:49 -0700 Message-ID: <5ed9e534-d134-2ba1-0276-0bc8bd949eb1@gmail.com> References: <1492612195-16601-1-git-send-email-al.kochet@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit To: Alexander Kochetkov , "David S. Miller" , Philippe Reynes , Peter Chen , Wei Yongjun , netdev@vger.kernel.org, linux-kernel@vger.kernel.org Return-path: Received: from mail-yb0-f196.google.com ([209.85.213.196]:32942 "EHLO mail-yb0-f196.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S966847AbdDSVIw (ORCPT ); Wed, 19 Apr 2017 17:08:52 -0400 In-Reply-To: <1492612195-16601-1-git-send-email-al.kochet@gmail.com> Sender: netdev-owner@vger.kernel.org List-ID: On 04/19/2017 07:29 AM, Alexander Kochetkov wrote: > The patch replace phy_start_aneg() with phy_start(). phy_start() call > phy_start_aneg() as a part of startup sequence and allow recover from > error (PHY_HALTED) state. > > Also added call phy_stop() to arc_emac_remove() to stop PHY state machine > when MAC is down. This looks fine. If you wanted to go further, you could move the phy_connect(), phy_disconnect() calls down to the arc_emac_open() respectively arc_emac_stop() as this would also allow the PHY device to be fully suspended when the interface is unused. > > Signed-off-by: Alexander Kochetkov > --- > drivers/net/ethernet/arc/emac_main.c | 4 +++- > 1 file changed, 3 insertions(+), 1 deletion(-) > > diff --git a/drivers/net/ethernet/arc/emac_main.c b/drivers/net/ethernet/arc/emac_main.c > index abc9f2a..188676d 100644 > --- a/drivers/net/ethernet/arc/emac_main.c > +++ b/drivers/net/ethernet/arc/emac_main.c > @@ -434,7 +434,7 @@ static int arc_emac_open(struct net_device *ndev) > /* Enable EMAC */ > arc_reg_or(priv, R_CTRL, EN_MASK); > > - phy_start_aneg(ndev->phydev); > + phy_start(ndev->phydev); > > netif_start_queue(ndev); > > @@ -556,6 +556,8 @@ static int arc_emac_stop(struct net_device *ndev) > napi_disable(&priv->napi); > netif_stop_queue(ndev); > > + phy_stop(ndev->phydev); > + > /* Disable interrupts */ > arc_reg_clr(priv, R_ENABLE, RXINT_MASK | TXINT_MASK | ERR_MASK); > > -- Florian