From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ganesh Venkatesan Subject: Re: ethtool -d no longer works for e1000 Date: Wed, 9 Mar 2005 14:09:45 -0800 Message-ID: <5fc59ff3050309140910f3e492@mail.gmail.com> References: <422F6C37.8090202@candelatech.com> Reply-To: Ganesh Venkatesan Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Cc: "netdev@oss.sgi.com" To: Ben Greear In-Reply-To: <422F6C37.8090202@candelatech.com> Sender: netdev-bounce@oss.sgi.com Errors-to: netdev-bounce@oss.sgi.com List-Id: netdev.vger.kernel.org Ben: Are you using the e1000 that is included in the 2.6.11 kernel? ethtool -d eth? works fine for me. What else is different in your env? ganesh. On Wed, 09 Mar 2005 13:35:51 -0800, Ben Greear wrote: > I tried this with FC2's 2.6.10-1.770_FC2smp kernel and with my own > slightly hacked 2.6.11 kernel. Both give this response: > > ethtool -d eth0 > Cannot dump registers: Success > > I am quite certain this used to work, and used to show me > the PCI bus speed and other nice details... > > Thanks, > Ben > > -- > Ben Greear > Candela Technologies Inc http://www.candelatech.com > >