From: "Imre Kaloz" <kaloz@kernel.org>
To: stable@vger.kernel.org
Cc: "Heiner Kallweit" <hkallweit1@gmail.com>,
nic_swsd@realtek.com, netdev@vger.kernel.org
Subject: Request for 6.12.y: r8169 RTL8126 ALDPS fix 4af2f60bf737
Date: Mon, 16 Nov 2026 17:25:41 +0100 [thread overview]
Message-ID: <603215d0-9331-40db-95ec-5742146a1cf1@app.fastmail.com> (raw)
Please apply to 6.12.y:
commit 4af2f60bf7378bd5c92b15a528d8c6c7d02bed6c
r8169: align RTL8125/RTL8126 PHY config with vendor driver
On RTL8126A, 6.12.y leaves ALDPS enabled. After the link partner had
been down for 30 or 60 s, the link came back up at 5000/Full but no
frames passed in either direction until the link went down again.
The commit adds the rtl8125_legacy_force_mode() and
rtl8168g_disable_aldps() calls to RTL8126A, which RTL8125D already has
in 6.12.y, and calls rtl8168g_enable_gphy_10m() on RTL8125D and
RTL8126A. On RTL8125B it replaces an identical open-coded write with
rtl8168g_enable_gphy_10m(). It was not tagged for stable.
It applies cleanly to v6.12.116. With it applied, the RTL8126A link
passes traffic after the partner's link was down for 30, 60 and 120 s;
without it, a 30 s or 60 s down leaves the link dead.
6.13 and later contain the commit, and older stable series have no
RTL8126 support, so only 6.12.y needs it.
Tested-by: Imre Kaloz <kaloz@kernel.org> # RTL8126A
Thanks,
Imre
next reply other threads:[~2026-11-16 16:26 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-16 16:25 Imre Kaloz [this message]
2026-11-17 1:03 ` Request for 6.12.y: r8169 RTL8126 ALDPS fix 4af2f60bf737 Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=603215d0-9331-40db-95ec-5742146a1cf1@app.fastmail.com \
--to=kaloz@kernel.org \
--cc=hkallweit1@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=nic_swsd@realtek.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox