netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ansuel Smith <ansuelsmth@gmail.com>
To: Vladimir Oltean <olteanv@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>,
	Vivien Didelot <vivien.didelot@gmail.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Russell King <linux@armlinux.org.uk>,
	linux-kernel@vger.kernel.org, netdev@vger.kernel.org
Subject: Re: [net-next PATCH 05/19] net: dsa: qca8k: move read switch id function in qca8k_setup
Date: Fri, 19 Nov 2021 02:08:59 +0100	[thread overview]
Message-ID: <6196f92e.1c69fb81.5e6a3.271b@mx.google.com> (raw)
In-Reply-To: <20211119010305.4atvwt6zn3dorq2p@skbuf>

On Fri, Nov 19, 2021 at 03:03:05AM +0200, Vladimir Oltean wrote:
> On Wed, Nov 17, 2021 at 10:04:37PM +0100, Ansuel Smith wrote:
> > Move read_switch_id function in qca8k_setup in preparation for regmap
> > conversion. Sw probe should NOT contain function that depends on reading
> > from switch regs.
> 
> It shouldn't? Why? We have plenty of switch drivers that use regmap in
> the probe function.
>

The initial idea was to make a shared probe function. (when the ipq40xx
code will be proposed)
Currently the regmap is init in the setup function so we can both 
move the switch id to setup or move regmap to probe.
What should be better in your opinion?

> > 
> > Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> > ---
> >  drivers/net/dsa/qca8k.c | 71 ++++++++++++++++++++---------------------
> >  1 file changed, 35 insertions(+), 36 deletions(-)
> > 
> > diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
> > index 19331edf1fd4..be98d11b17ec 100644
> > --- a/drivers/net/dsa/qca8k.c
> > +++ b/drivers/net/dsa/qca8k.c
> > @@ -1073,6 +1073,36 @@ qca8k_parse_port_config(struct qca8k_priv *priv)
> >  	return 0;
> >  }
> >  
> > +static int qca8k_read_switch_id(struct qca8k_priv *priv)
> > +{
> > +	const struct qca8k_match_data *data;
> > +	u32 val;
> > +	u8 id;
> > +	int ret;
> > +
> > +	/* get the switches ID from the compatible */
> > +	data = of_device_get_match_data(priv->dev);
> > +	if (!data)
> > +		return -ENODEV;
> > +
> > +	ret = qca8k_read(priv, QCA8K_REG_MASK_CTRL, &val);
> > +	if (ret < 0)
> > +		return -ENODEV;
> > +
> > +	id = QCA8K_MASK_CTRL_DEVICE_ID(val);
> > +	if (id != data->id) {
> > +		dev_err(priv->dev, "Switch id detected %x but expected %x", id, data->id);
> > +		return -ENODEV;
> > +	}
> > +
> > +	priv->switch_id = id;
> > +
> > +	/* Save revision to communicate to the internal PHY driver */
> > +	priv->switch_revision = QCA8K_MASK_CTRL_REV_ID(val);
> > +
> > +	return 0;
> > +}
> > +
> >  static int
> >  qca8k_setup(struct dsa_switch *ds)
> >  {
> > @@ -1080,6 +1110,11 @@ qca8k_setup(struct dsa_switch *ds)
> >  	int cpu_port, ret, i;
> >  	u32 mask;
> >  
> > +	/* Check the detected switch id */
> > +	ret = qca8k_read_switch_id(priv);
> > +	if (ret)
> > +		return ret;
> > +
> >  	cpu_port = qca8k_find_cpu_port(ds);
> >  	if (cpu_port < 0) {
> >  		dev_err(priv->dev, "No cpu port configured in both cpu port0 and port6");
> > @@ -2023,41 +2058,10 @@ static const struct dsa_switch_ops qca8k_switch_ops = {
> >  	.get_phy_flags		= qca8k_get_phy_flags,
> >  };
> >  
> > -static int qca8k_read_switch_id(struct qca8k_priv *priv)
> > -{
> > -	const struct qca8k_match_data *data;
> > -	u32 val;
> > -	u8 id;
> > -	int ret;
> > -
> > -	/* get the switches ID from the compatible */
> > -	data = of_device_get_match_data(priv->dev);
> > -	if (!data)
> > -		return -ENODEV;
> > -
> > -	ret = qca8k_read(priv, QCA8K_REG_MASK_CTRL, &val);
> > -	if (ret < 0)
> > -		return -ENODEV;
> > -
> > -	id = QCA8K_MASK_CTRL_DEVICE_ID(val);
> > -	if (id != data->id) {
> > -		dev_err(priv->dev, "Switch id detected %x but expected %x", id, data->id);
> > -		return -ENODEV;
> > -	}
> > -
> > -	priv->switch_id = id;
> > -
> > -	/* Save revision to communicate to the internal PHY driver */
> > -	priv->switch_revision = QCA8K_MASK_CTRL_REV_ID(val);
> > -
> > -	return 0;
> > -}
> > -
> >  static int
> >  qca8k_sw_probe(struct mdio_device *mdiodev)
> >  {
> >  	struct qca8k_priv *priv;
> > -	int ret;
> >  
> >  	/* allocate the private data struct so that we can probe the switches
> >  	 * ID register
> > @@ -2083,11 +2087,6 @@ qca8k_sw_probe(struct mdio_device *mdiodev)
> >  		gpiod_set_value_cansleep(priv->reset_gpio, 0);
> >  	}
> >  
> > -	/* Check the detected switch id */
> > -	ret = qca8k_read_switch_id(priv);
> > -	if (ret)
> > -		return ret;
> > -
> >  	priv->ds = devm_kzalloc(&mdiodev->dev, sizeof(*priv->ds), GFP_KERNEL);
> >  	if (!priv->ds)
> >  		return -ENOMEM;
> > -- 
> > 2.32.0
> > 
> 

-- 
	Ansuel

  reply	other threads:[~2021-11-19  1:09 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-17 21:04 [net-next PATCH 00/19] Multiple cleanup and feature for qca8k Ansuel Smith
2021-11-17 21:04 ` regmap: allow to define reg_update_bits for no bus configuration Ansuel Smith
2021-11-17 22:15   ` Mark Brown
2021-11-17 22:19     ` Ansuel Smith
2021-11-17 22:33       ` Mark Brown
2021-11-19  1:54         ` Jakub Kicinski
2021-11-19  2:00           ` Ansuel Smith
2021-11-19  2:00   ` patchwork-bot+netdevbpf
2021-11-17 21:04 ` [net-next PATCH 02/19] net: dsa: qca8k: remove redundant check in parse_port_config Ansuel Smith
2021-11-18 23:59   ` Vladimir Oltean
2021-11-17 21:04 ` [net-next PATCH 03/19] net: dsa: qca8k: skip sgmii delay on double cpu conf Ansuel Smith
2021-11-19  0:58   ` Vladimir Oltean
2021-11-17 21:04 ` [net-next PATCH 04/19] net: dsa: qca8k: convert to GENMASK/FIELD_PREP/FIELD_GET Ansuel Smith
2021-11-17 21:04 ` [net-next PATCH 05/19] net: dsa: qca8k: move read switch id function in qca8k_setup Ansuel Smith
2021-11-19  1:03   ` Vladimir Oltean
2021-11-19  1:08     ` Ansuel Smith [this message]
2021-11-21 18:34       ` Vladimir Oltean
2021-11-17 21:04 ` [net-next PATCH 06/19] net: dsa: qca8k: remove extra mutex_init " Ansuel Smith
2021-11-17 21:04 ` [net-next PATCH 07/19] net: dsa: qca8k: set regmap init as mandatory for regmap conversion Ansuel Smith
2021-11-19  1:09   ` Vladimir Oltean
2021-11-17 21:04 ` [net-next PATCH 08/19] net: dsa: qca8k: convert qca8k to regmap helper Ansuel Smith
2021-11-19  1:14   ` Vladimir Oltean
2021-11-19  1:28     ` Ansuel Smith
2021-11-21 18:31       ` Vladimir Oltean
2021-11-17 21:04 ` [net-next PATCH 09/19] net: dsa: qca8k: add additional MIB counter and make it dynamic Ansuel Smith
2021-11-19  1:17   ` Vladimir Oltean
2021-11-17 21:04 ` [net-next PATCH 10/19] net: dsa: qca8k: add support for port fast aging Ansuel Smith
2021-11-19  1:20   ` Vladimir Oltean
2021-11-17 21:04 ` [net-next PATCH 11/19] net: dsa: qca8k: add support for mirror mode Ansuel Smith
2021-11-19  1:42   ` Vladimir Oltean
2021-11-17 21:04 ` [net-next PATCH 12/19] net: dsa: qca8k: add set_ageing_time support Ansuel Smith
2021-11-19  1:47   ` Vladimir Oltean
2021-11-17 21:04 ` [net-next PATCH 13/19] net: dsa: qca8k: add min/max ageing time Ansuel Smith
2021-11-19  1:49   ` Vladimir Oltean
2021-11-17 21:04 ` [net-next PATCH 14/19] net: dsa: qca8k: add support for mdb_add/del Ansuel Smith
2021-11-19  2:06   ` Vladimir Oltean
2021-11-19  2:19     ` Ansuel Smith
2021-11-19  2:33       ` Vladimir Oltean
2021-11-17 21:04 ` [net-next PATCH 15/19] net: dsa: qca8k: add LAG support Ansuel Smith
2021-11-19  2:13   ` Vladimir Oltean
2021-11-17 21:04 ` [net-next PATCH 16/19] net: dsa: qca8k: enable mtu_enforcement_ingress Ansuel Smith
2021-11-19  2:20   ` Vladimir Oltean
2021-11-19  2:28     ` Ansuel Smith
2021-11-21 18:11       ` Vladimir Oltean
2021-11-17 21:04 ` [net-next PATCH 17/19] net: dsa: qca8k: move qca8k to qca dir Ansuel Smith
2021-11-17 21:04 ` [net-next PATCH 18/19] net: dsa: qca8k: use device_get_match_data instead of the OF variant Ansuel Smith
2021-11-19  2:21   ` Vladimir Oltean
2021-11-19  2:32     ` Ansuel Smith
2021-11-21 18:03       ` Vladimir Oltean
2021-11-17 21:04 ` [net-next PATCH 19/19] net: dsa: qca8k: split qca8k in common and 8xxx specific code Ansuel Smith

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6196f92e.1c69fb81.5e6a3.271b@mx.google.com \
    --to=ansuelsmth@gmail.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=netdev@vger.kernel.org \
    --cc=olteanv@gmail.com \
    --cc=vivien.didelot@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).