Netdev List
 help / color / mirror / Atom feed
From: Przemek Kitszel <przemyslaw.kitszel@intel.com>
To: Aaron Ma <aaron.ma@canonical.com>,
	Tony Nguyen <anthony.l.nguyen@intel.com>,
	Andrew Lunn <andrew+netdev@lunn.ch>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@kernel.org>,
	"Jakub Kicinski" <kuba@kernel.org>,
	Paolo Abeni <pabeni@redhat.com>,
	"Alexander Lobakin" <aleksander.lobakin@intel.com>,
	Richard Cochran <richardcochran@gmail.com>,
	<netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: Jacob Keller <jacob.e.keller@intel.com>,
	"moderated list:INTEL ETHERNET DRIVERS"
	<intel-wired-lan@lists.osuosl.org>
Subject: Re: [PATCH 2/5] ice: retain the adapter throughout hardware initialization and teardown
Date: Tue, 20 Oct 2026 11:24:27 +0200	[thread overview]
Message-ID: <62a43d55-f114-45a5-824f-c09f87bea537@intel.com> (raw)
In-Reply-To: <20261019105155.3793063-3-aaron.ma@canonical.com>

On 10/19/26 12:51, Aaron Ma wrote:
> Adapter-scoped synchronization must be available to Admin Queue users
> from initial queue creation through the last teardown command. Probe
> currently obtains its adapter reference only after hardware and package
> initialization, and error cleanup and removal drop it before hardware
> teardown.
> 
> Acquire the reference before either normal hardware initialization or
> firmware recovery-mode initialization. Release it after hardware and
> device cleanup, balancing recovery-mode probe failures and removal too.
> 
> This establishes the lifetime prerequisite for moving package ownership
> exclusion from a module-global mutex to the shared adapter.
> 
> Signed-off-by: Aaron Ma <aaron.ma@canonical.com>

it was me to move hw init before adapter init, to make hw details
readily accessible to the adapter

but I agree that SW lock protection covering HW reinit will be great,
and my needs could be achieved by other means, even if less elegant

so, I'm happy with your patch
OTOH I have a big series that git-conflicts, would be easiest if your
series will be merged first (so I will adjust), but I don't want to be
delayed (will be CCing you on it going forward)

the real thing is of course the 3rd patch not this one

> ---
>   drivers/net/ethernet/intel/ice/ice_main.c | 31 +++++++++++++----------
>   1 file changed, 17 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
> index 164428ba116a0..ddebb28b2454f 100644
> --- a/drivers/net/ethernet/intel/ice/ice_main.c
> +++ b/drivers/net/ethernet/intel/ice/ice_main.c
> @@ -5242,27 +5242,29 @@ ice_probe(struct pci_dev *pdev, const struct pci_device_id __always_unused *ent)
>   		hw->debug_mask = debug;
>   #endif
>   
> -	if (ice_is_recovery_mode(hw))
> -		return ice_probe_recovery_mode(pf);
> +	adapter = ice_adapter_get(pdev);
> +	if (IS_ERR(adapter))
> +		return PTR_ERR(adapter);
> +	pf->adapter = adapter;
> +
> +	if (ice_is_recovery_mode(hw)) {
> +		err = ice_probe_recovery_mode(pf);
> +		if (err)
> +			ice_adapter_put(pdev);
> +		return err;
> +	}
>   
>   	err = ice_init_hw(hw);
>   	if (err) {
>   		dev_err(dev, "ice_init_hw failed: %d\n", err);
> -		return err;
> +		goto unroll_adapter;
>   	}
>   
>   	ice_init_dev_hw(pf);
>   
> -	adapter = ice_adapter_get(pdev);
> -	if (IS_ERR(adapter)) {
> -		err = PTR_ERR(adapter);
> -		goto unroll_hw_init;
> -	}
> -	pf->adapter = adapter;
> -
>   	err = ice_init_dev(pf);
>   	if (err)
> -		goto unroll_adapter;
> +		goto unroll_hw_init;
>   
>   	err = ice_init(pf);
>   	if (err)
> @@ -5287,12 +5289,12 @@ ice_probe(struct pci_dev *pdev, const struct pci_device_id __always_unused *ent)
>   	ice_deinit(pf);
>   unroll_dev_init:
>   	need_dev_deinit = true;
> -unroll_adapter:
> -	ice_adapter_put(pdev);
>   unroll_hw_init:
>   	ice_deinit_hw(hw);
>   	if (need_dev_deinit)
>   		ice_deinit_dev(pf);
> +unroll_adapter:
> +	ice_adapter_put(pdev);
>   	return err;
>   }
>   
> @@ -5377,6 +5379,7 @@ static void ice_remove(struct pci_dev *pdev)
>   		scoped_guard(devl, priv_to_devlink(pf)) {
>   			ice_deinit_devlink(pf);
>   		}
> +		ice_adapter_put(pdev);
>   		return;
>   	}
>   
> @@ -5403,11 +5406,11 @@ static void ice_remove(struct pci_dev *pdev)
>   	ice_setup_mc_magic_wake(pf);
>   	ice_set_wake(pf);
>   
> -	ice_adapter_put(pdev);
>   	ice_deinit_hw(&pf->hw);
>   
>   	ice_deinit_dev(pf);
>   	ice_aq_cancel_waiting_tasks(pf);
> +	ice_adapter_put(pdev);
>   	set_bit(ICE_DOWN, pf->state);
>   }
>   


  parent reply	other threads:[~2026-10-20  9:18 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-19 10:51 [PATCH 0/5] ice: fix reset and suspend paths Aaron Ma
2026-10-19 10:51 ` [PATCH 1/5] ice: check the full PF reset polling limit Aaron Ma
2026-10-19 11:28   ` Temerkhanov, Sergey
2026-10-19 11:30   ` Przemek Kitszel
2026-10-19 10:51 ` [PATCH 2/5] ice: retain the adapter throughout hardware initialization and teardown Aaron Ma
2026-10-19 11:29   ` Temerkhanov, Sergey
2026-10-20  9:24   ` Przemek Kitszel [this message]
2026-10-19 10:51 ` [PATCH 3/5] ice: scope global configuration lock to the adapter Aaron Ma
2026-10-19 10:51 ` [PATCH 4/5] ice: clear DVM boost table before scanning package hints Aaron Ma
2026-10-19 10:51 ` [PATCH 5/5] ice: quiesce PTP periodic work before system suspend Aaron Ma

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=62a43d55-f114-45a5-824f-c09f87bea537@intel.com \
    --to=przemyslaw.kitszel@intel.com \
    --cc=aaron.ma@canonical.com \
    --cc=aleksander.lobakin@intel.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=anthony.l.nguyen@intel.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@kernel.org \
    --cc=intel-wired-lan@lists.osuosl.org \
    --cc=jacob.e.keller@intel.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=richardcochran@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox