From: Christian Marangi <ansuelsmth@gmail.com>
To: Andrew Lunn <andrew@lunn.ch>
Cc: mattias.forsblad@gmail.com, netdev <netdev@vger.kernel.org>,
Florian Fainelli <f.fainelli@gmail.com>,
Vladimir Oltean <vladimir.oltean@nxp.com>
Subject: Re: [PATCH rfc v0 9/9] net: dsa: qca8k: Move inband mutex into DSA core
Date: Tue, 20 Sep 2022 05:19:07 +0200 [thread overview]
Message-ID: <6329c228.df0a0220.fd08a.30e3@mx.google.com> (raw)
In-Reply-To: <20220919221853.4095491-10-andrew@lunn.ch>
On Tue, Sep 20, 2022 at 12:18:53AM +0200, Andrew Lunn wrote:
> The mutex serves two purposes:
>
> It serialises operations on the switch, so that only one
> request/response can be happening at once.
>
> It protects priv->mgmt_master, which itself has two purposes. If the
> hardware is wrongly wires, the wrong switch port is connected to the
> cpu, inband cannot be used. In this case it has the value
> NULL. Additionally, if the master is down, it is set to
> NULL. Otherwise it points to the netdev used to send frames to the
> switch.
>
> The protection of priv->mgmt_master is not required. It is a single
> pointer, which will be updated atomically. It is not expected that the
> interface disappears, it only goes down. Hence mgmt_master will always
> be valid, or NULL.
>
> Move the check for the master device being NULL into the core. Also,
> move the mutex for serialisation into the core.
>
> The MIB operations don't follow request/response semantics, so its
> mutex is left untouched.
>
> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
BTW this patch makes the router crash with a kernel panic. Rest of the
patchset works correctly and seems to be no regression. (I had to fix
the clear_skb return value)
> ---
> drivers/net/dsa/qca/qca8k-8xxx.c | 68 ++++++--------------------------
> drivers/net/dsa/qca/qca8k.h | 1 -
> include/net/dsa.h | 1 +
> net/dsa/dsa.c | 7 ++++
> 4 files changed, 19 insertions(+), 58 deletions(-)
>
> diff --git a/drivers/net/dsa/qca/qca8k-8xxx.c b/drivers/net/dsa/qca/qca8k-8xxx.c
> index 234d79a09e78..3e60bbe2570d 100644
> --- a/drivers/net/dsa/qca/qca8k-8xxx.c
> +++ b/drivers/net/dsa/qca/qca8k-8xxx.c
> @@ -238,15 +238,6 @@ static int qca8k_read_eth(struct qca8k_priv *priv, u32 reg, u32 *val, int len)
> if (!skb)
> return -ENOMEM;
>
> - mutex_lock(&mgmt_eth_data->mutex);
> -
> - /* Check mgmt_master if is operational */
> - if (!priv->mgmt_master) {
> - kfree_skb(skb);
> - mutex_unlock(&mgmt_eth_data->mutex);
> - return -EINVAL;
> - }
> -
> skb->dev = priv->mgmt_master;
>
> ret = dsa_inband_request(&mgmt_eth_data->inband, skb,
> @@ -258,8 +249,6 @@ static int qca8k_read_eth(struct qca8k_priv *priv, u32 reg, u32 *val, int len)
> if (len > QCA_HDR_MGMT_DATA1_LEN)
> memcpy(val + 1, &data[1], len - QCA_HDR_MGMT_DATA1_LEN);
>
> - mutex_unlock(&mgmt_eth_data->mutex);
> -
> return ret;
> }
>
> @@ -267,32 +256,18 @@ static int qca8k_write_eth(struct qca8k_priv *priv, u32 reg, u32 *val, int len)
> {
> struct qca8k_mgmt_eth_data *mgmt_eth_data = &priv->mgmt_eth_data;
> struct sk_buff *skb;
> - int ret;
>
> skb = qca8k_alloc_mdio_header(MDIO_WRITE, reg, val,
> QCA8K_ETHERNET_MDIO_PRIORITY, len);
> if (!skb)
> return -ENOMEM;
>
> - mutex_lock(&mgmt_eth_data->mutex);
> -
> - /* Check mgmt_master if is operational */
> - if (!priv->mgmt_master) {
> - kfree_skb(skb);
> - mutex_unlock(&mgmt_eth_data->mutex);
> - return -EINVAL;
> - }
> -
> skb->dev = priv->mgmt_master;
>
> - ret = dsa_inband_request(&mgmt_eth_data->inband, skb,
> - qca8k_mdio_header_fill_seq_num,
> - NULL, 0,
> - QCA8K_ETHERNET_TIMEOUT);
> -
> - mutex_unlock(&mgmt_eth_data->mutex);
> -
> - return ret;
> + return dsa_inband_request(&mgmt_eth_data->inband, skb,
> + qca8k_mdio_header_fill_seq_num,
> + NULL, 0,
> + QCA8K_ETHERNET_TIMEOUT);
> }
>
> static int
> @@ -438,7 +413,6 @@ qca8k_phy_eth_command(struct qca8k_priv *priv, bool read, int phy,
> struct sk_buff *write_skb, *clear_skb, *read_skb;
> struct qca8k_mgmt_eth_data *mgmt_eth_data;
> u32 write_val, clear_val = 0, val;
> - struct net_device *mgmt_master;
> u32 resp_data[4];
> int ret, ret1;
>
> @@ -484,19 +458,9 @@ qca8k_phy_eth_command(struct qca8k_priv *priv, bool read, int phy,
> * 3. Get the data if we are reading
> * 4. Reset the mdio master (even with error)
> */
> - mutex_lock(&mgmt_eth_data->mutex);
> -
> - /* Check if mgmt_master is operational */
> - mgmt_master = priv->mgmt_master;
> - if (!mgmt_master) {
> - mutex_unlock(&mgmt_eth_data->mutex);
> - ret = -EINVAL;
> - goto err_mgmt_master;
> - }
> -
> - read_skb->dev = mgmt_master;
> - clear_skb->dev = mgmt_master;
> - write_skb->dev = mgmt_master;
> + read_skb->dev = priv->mgmt_master;
> + clear_skb->dev = priv->mgmt_master;
> + write_skb->dev = priv->mgmt_master;
>
> ret = dsa_inband_request(&mgmt_eth_data->inband, write_skb,
> qca8k_mdio_header_fill_seq_num,
> @@ -533,18 +497,11 @@ qca8k_phy_eth_command(struct qca8k_priv *priv, bool read, int phy,
> }
> exit:
>
> - ret = dsa_inband_request(&mgmt_eth_data->inband, clear_skb,
> - qca8k_mdio_header_fill_seq_num,
> - NULL, 0,
> - QCA8K_ETHERNET_TIMEOUT);
> -
> - mutex_unlock(&mgmt_eth_data->mutex);
> -
> - return ret;
> + return dsa_inband_request(&mgmt_eth_data->inband, clear_skb,
> + qca8k_mdio_header_fill_seq_num,
> + NULL, 0,
> + QCA8K_ETHERNET_TIMEOUT);
>
> - /* Error handling before lock */
> -err_mgmt_master:
> - kfree_skb(read_skb);
> err_read_skb:
> kfree_skb(clear_skb);
> err_clear_skb:
> @@ -1526,13 +1483,11 @@ qca8k_master_change(struct dsa_switch *ds, const struct net_device *master,
> if (dp->index != 0)
> return;
>
> - mutex_lock(&priv->mgmt_eth_data.mutex);
> mutex_lock(&priv->mib_eth_data.mutex);
>
> priv->mgmt_master = operational ? (struct net_device *)master : NULL;
>
> mutex_unlock(&priv->mib_eth_data.mutex);
> - mutex_unlock(&priv->mgmt_eth_data.mutex);
> }
>
> static int qca8k_connect_tag_protocol(struct dsa_switch *ds,
> @@ -1850,7 +1805,6 @@ qca8k_sw_probe(struct mdio_device *mdiodev)
> if (!priv->ds)
> return -ENOMEM;
>
> - mutex_init(&priv->mgmt_eth_data.mutex);
> dsa_inband_init(&priv->mgmt_eth_data.inband, U32_MAX);
>
> mutex_init(&priv->mib_eth_data.mutex);
> diff --git a/drivers/net/dsa/qca/qca8k.h b/drivers/net/dsa/qca/qca8k.h
> index 70494096e251..6da36ed6486b 100644
> --- a/drivers/net/dsa/qca/qca8k.h
> +++ b/drivers/net/dsa/qca/qca8k.h
> @@ -347,7 +347,6 @@ enum {
>
> struct qca8k_mgmt_eth_data {
> struct dsa_inband inband;
> - struct mutex mutex; /* Enforce one mdio read/write at time */
> };
>
> struct qca8k_mib_eth_data {
> diff --git a/include/net/dsa.h b/include/net/dsa.h
> index dad9e31d36ce..7a545b781e7d 100644
> --- a/include/net/dsa.h
> +++ b/include/net/dsa.h
> @@ -1281,6 +1281,7 @@ bool dsa_mdb_present_in_other_db(struct dsa_switch *ds, int port,
> * frames and expecting a response in a frame.
> */
> struct dsa_inband {
> + struct mutex lock; /* Serialise operations */
> struct completion completion;
> u32 seqno;
> u32 seqno_mask;
> diff --git a/net/dsa/dsa.c b/net/dsa/dsa.c
> index 4fa0ab4ae58e..82c729d631eb 100644
> --- a/net/dsa/dsa.c
> +++ b/net/dsa/dsa.c
> @@ -521,6 +521,7 @@ EXPORT_SYMBOL_GPL(dsa_mdb_present_in_other_db);
> void dsa_inband_init(struct dsa_inband *inband, u32 seqno_mask)
> {
> init_completion(&inband->completion);
> + mutex_init(&inband->lock);
> mutex_init(&inband->resp_lock);
> inband->seqno_mask = seqno_mask;
> inband->seqno = 0;
> @@ -567,6 +568,11 @@ int dsa_inband_request(struct dsa_inband *inband, struct sk_buff *skb,
> reinit_completion(&inband->completion);
> inband->err = 0;
>
> + if (!skb->dev)
> + return -EOPNOTSUPP;
> +
> + mutex_lock(&inband->lock);
> +
> mutex_lock(&inband->resp_lock);
> inband->resp = resp;
> inband->resp_len = resp_len;
> @@ -585,6 +591,7 @@ int dsa_inband_request(struct dsa_inband *inband, struct sk_buff *skb,
> inband->resp = NULL;
> inband->resp_len = 0;
> mutex_unlock(&inband->resp_lock);
> + mutex_unlock(&inband->lock);
>
> if (ret < 0)
> return ret;
> --
> 2.37.2
>
--
Ansuel
next prev parent reply other threads:[~2022-09-20 13:37 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-19 11:08 [PATCH net-next v14 0/7] net: dsa: qca8k, mv88e6xxx: rmon: Add RMU support Mattias Forsblad
2022-09-19 11:08 ` [PATCH net-next v14 1/7] net: dsa: mv88e6xxx: Add RMU enable for select switches Mattias Forsblad
2022-09-19 11:08 ` [PATCH net-next v14 2/7] net: dsa: Add convenience functions for frame handling Mattias Forsblad
2022-09-19 22:14 ` Vladimir Oltean
2022-09-19 22:22 ` Andrew Lunn
2022-09-19 22:18 ` [PATCH rfc v0 0/9] DSA: Move parts of inband signalling into the DSA Andrew Lunn
2022-09-19 22:18 ` [PATCH rfc v0 1/9] net: dsa: qca8k: Fix inconsistent use of jiffies vs milliseconds Andrew Lunn
2022-09-19 22:18 ` [PATCH rfc v0 2/9] net: dsa: qca8k: Move completion into DSA core Andrew Lunn
2022-09-20 14:43 ` Vladimir Oltean
2022-09-21 0:19 ` Andrew Lunn
2022-09-21 0:22 ` Vladimir Oltean
2022-09-19 22:18 ` [PATCH rfc v0 3/9] net: dsa: qca8K: Move queuing for request frame into the core Andrew Lunn
2022-09-19 22:18 ` [PATCH rfc v0 4/9] net: dsa: qca8k: dsa_inband_request: More normal return values Andrew Lunn
2022-09-19 23:02 ` Vladimir Oltean
2022-09-19 23:21 ` Andrew Lunn
2022-09-19 23:16 ` Vladimir Oltean
2022-09-19 22:18 ` [PATCH rfc v0 5/9] net: dsa: qca8k: Move request sequence number handling into core Andrew Lunn
2022-09-19 22:18 ` [PATCH rfc v0 6/9] net: dsa: qca8k: Refactor sequence number mismatch to use error code Andrew Lunn
2022-09-19 23:30 ` Vladimir Oltean
2022-09-20 0:05 ` Andrew Lunn
2022-09-19 22:18 ` [PATCH rfc v0 7/9] net: dsa: qca8k: Pass error code from reply decoder to requester Andrew Lunn
2022-09-19 22:18 ` [PATCH rfc v0 8/9] net: dsa: qca8k: Pass response buffer via dsa_rmu_request Andrew Lunn
2022-09-20 0:27 ` Vladimir Oltean
2022-09-20 12:33 ` Andrew Lunn
2022-09-19 22:18 ` [PATCH rfc v0 9/9] net: dsa: qca8k: Move inband mutex into DSA core Andrew Lunn
2022-09-20 3:19 ` Christian Marangi [this message]
2022-09-20 15:48 ` Andrew Lunn
2022-09-19 11:08 ` [PATCH net-next v14 3/7] net: dsa: Introduce dsa tagger data operation Mattias Forsblad
2022-09-19 22:00 ` Vladimir Oltean
2022-09-20 6:41 ` Mattias Forsblad
2022-09-20 10:31 ` Vladimir Oltean
2022-09-20 11:10 ` Mattias Forsblad
2022-09-19 11:08 ` [PATCH net-next v14 4/7] net: dsa: mv88e6xxxx: Add RMU functionality Mattias Forsblad
2022-09-19 22:39 ` Vladimir Oltean
2022-09-20 11:53 ` Mattias Forsblad
2022-09-20 12:22 ` Vladimir Oltean
2022-09-19 11:08 ` [PATCH net-next v14 5/7] net: dsa: mv88e6xxx: rmu: Add functionality to get RMON Mattias Forsblad
2022-09-19 22:49 ` Vladimir Oltean
2022-09-20 12:26 ` Mattias Forsblad
2022-09-20 13:10 ` Vladimir Oltean
2022-09-20 13:40 ` Mattias Forsblad
2022-09-20 21:04 ` Andrew Lunn
2022-09-21 5:35 ` Mattias Forsblad
2022-09-21 15:50 ` Andrew Lunn
2022-09-22 11:48 ` Vladimir Oltean
2022-09-22 12:45 ` Andrew Lunn
2022-09-22 13:04 ` Vladimir Oltean
2022-09-22 17:27 ` Andrew Lunn
2022-09-19 11:08 ` [PATCH net-next v14 6/7] net: dsa: mv88e6xxx: rmon: Use RMU for reading RMON data Mattias Forsblad
2022-09-19 11:08 ` [PATCH net-next v14 7/7] net: dsa: qca8k: Use new convenience functions Mattias Forsblad
2022-09-19 11:23 ` Christian Marangi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6329c228.df0a0220.fd08a.30e3@mx.google.com \
--to=ansuelsmth@gmail.com \
--cc=andrew@lunn.ch \
--cc=f.fainelli@gmail.com \
--cc=mattias.forsblad@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=vladimir.oltean@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).