From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kishon Vijay Abraham I Subject: Re: [PATCH v3 0/5] phy: core: rework phy_set_mode to accept phy mode and submode Date: Wed, 21 Nov 2018 14:25:04 +0530 Message-ID: <6418b7c3-7345-76e8-90c0-9a77769f6f87@ti.com> References: <20181120012424.11802-1-grygorii.strashko@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Cc: , Sekhar Nori , , , Tony Lindgren , , , Alexandre Belloni , Vivek Gautam , Maxime Ripard , Chen-Yu Tsai , Carlo Caione , Chunfeng Yun , Matthias Brugger , Manu Gautam To: Grygorii Strashko , "David S. Miller" , Antoine Tenart , Quentin Schulz , Russell King - ARM Linux , Maxime Chevallier Return-path: In-Reply-To: <20181120012424.11802-1-grygorii.strashko@ti.com> Content-Language: en-US Sender: linux-kernel-owner@vger.kernel.org List-Id: netdev.vger.kernel.org On 20/11/18 6:54 AM, Grygorii Strashko wrote: > Hi Kishon, All, > > Thank you for your review. > I've not added "Tested-by"/"Acked-by" tags due to code changes in v3. merged after adding the required ACKs. Thanks Kishon > > As was discussed in [1] I'm posting series which introduces rework of > phy_set_mode to accept phy mode and submode. I've dropped TI specific patches as > this change is pretty big by itself. > > Patch 1 is cumulative change which refactors PHY framework code to > support dual level PHYs mode configuration - PHY mode and PHY submode. It > extends .set_mode() callback to support additional parameter "int submode" > and converts all corresponding PHY drivers to support new .set_mode() > callback declaration. > The new extended PHY API > int phy_set_mode_ext(struct phy *phy, enum phy_mode mode, int submode) > is introduced to support dual level PHYs mode configuration and existing > phy_set_mode() API is converted to macros, so PHY framework consumers do > not need to be changed (~21 matches). > > Patches 2-4: Add new PHY's mode to be used by Ethernet PHY interface drivers or > multipurpose PHYs like serdes and convert ocelot-serdes and mvebu-cp110-comphy > PHY drivers to use recently introduced PHY_MODE_ETHERNET and phy_set_mode_ext(). > > Patch 5 - removes unused, ethernet specific phy modes from enum phy_mode. > > Testing: > - series tested on TI am335x/am437x/am5(dra7) paltforms. > - other driver build tested. > > changes in v3: > - mux tables for PHY ocelot-serdes driver updated to store PHY mode and submode > - mux tables for PHY mvebu-cp110-comphy driver updated to store PHY mode > and submode > changes in v2: > - marvell PHY and net drivers updated as recommended by Russell King > > v2: https://lkml.org/lkml/2018/11/10/220 > v1: https://lkml.org/lkml/2018/11/8/260 > > [1] https://lkml.org/lkml/2018/10/25/366 > > Grygorii Strashko (5): > phy: core: rework phy_set_mode to accept phy mode and submode > phy: core: add PHY_MODE_ETHERNET > phy: ocelot-serdes: convert to use eth phy mode and submode > phy: mvebu-cp110-comphy: convert to use eth phy mode and submode > phy: core: clean up unused ethernet specific phy modes > > drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 19 +---- > drivers/net/ethernet/mscc/ocelot.c | 9 +-- > drivers/phy/allwinner/phy-sun4i-usb.c | 3 +- > drivers/phy/amlogic/phy-meson-gxl-usb2.c | 5 +- > drivers/phy/amlogic/phy-meson-gxl-usb3.c | 5 +- > drivers/phy/marvell/phy-mvebu-cp110-comphy.c | 93 ++++++++++++++----------- > drivers/phy/mediatek/phy-mtk-tphy.c | 2 +- > drivers/phy/mediatek/phy-mtk-xsphy.c | 2 +- > drivers/phy/mscc/phy-ocelot-serdes.c | 24 +++++-- > drivers/phy/phy-core.c | 6 +- > drivers/phy/qualcomm/phy-qcom-qmp.c | 3 +- > drivers/phy/qualcomm/phy-qcom-qusb2.c | 3 +- > drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c | 3 +- > drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c | 3 +- > drivers/phy/qualcomm/phy-qcom-usb-hs.c | 3 +- > drivers/phy/ti/phy-da8xx-usb.c | 3 +- > drivers/phy/ti/phy-tusb1210.c | 2 +- > include/linux/phy/phy.h | 18 +++-- > 18 files changed, 111 insertions(+), 95 deletions(-) >