Re: [PATCH] net: stmmac: xgmac: report L3/L4 filter match count in ethtool stats

[Jacob Keller <jacob.e.keller@intel.com>]

On 6/4/2026 1:30 AM, muhammad.nazim.amirul.nazle.asmade@altera.com wrote:
> From: Nazim Amirul <muhammad.nazim.amirul.nazle.asmade@altera.com>
> 
> Read the L3FM and L4FM bits from the RX descriptor status word (RDES2)
> and increment the corresponding ethtool statistics counters. This allows
> users to observe L3/L4 filter hit rates via ethtool -S.
> 
> Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com>
> Signed-off-by: Nazim Amirul <muhammad.nazim.amirul.nazle.asmade@altera.com>
> ---
>  drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h       | 2 ++
>  drivers/net/ethernet/stmicro/stmmac/dwxgmac2_descs.c | 6 ++++++
>  2 files changed, 8 insertions(+)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
> index 51943705a2b0..95fdf3133208 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
> @@ -429,6 +429,8 @@
>  #define XGMAC_TDES3_VLTV		BIT(16)
>  #define XGMAC_TDES3_VT			GENMASK(15, 0)
>  #define XGMAC_TDES3_FL			GENMASK(14, 0)
> +#define XGMAC_RDES2_L4FM		BIT(28)
> +#define XGMAC_RDES2_L3FM		BIT(27)
>  #define XGMAC_RDES2_HL			GENMASK(9, 0)
>  #define XGMAC_RDES3_OWN			BIT(31)
>  #define XGMAC_RDES3_CTXT		BIT(30)
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_descs.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_descs.c
> index b5f200a87484..6719ac6e395b 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_descs.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_descs.c
> @@ -27,6 +27,7 @@ static int dwxgmac2_get_rx_status(struct stmmac_extra_stats *x,
>  				  struct dma_desc *p)
>  {
>  	u32 rdes3 = le32_to_cpu(p->des3);
> +	u32 rdes2 = le32_to_cpu(p->des2);
>  
>  	if (unlikely(rdes3 & XGMAC_RDES3_OWN))
>  		return dma_own;
> @@ -37,6 +38,11 @@ static int dwxgmac2_get_rx_status(struct stmmac_extra_stats *x,
>  	if (unlikely((rdes3 & XGMAC_RDES3_ES) && (rdes3 & XGMAC_RDES3_LD)))
>  		return discard_frame;
>  
> +	if (rdes2 & XGMAC_RDES2_L3FM)
> +		x->l3_filter_match++;
> +	if (rdes2 & XGMAC_RDES2_L4FM)
> +		x->l4_filter_match++;
> +
>  	return good_frame;
>  }
>  

Right. The l3_filter_match and l4_filter_match already get reported in
stmmac_ethtool.c

Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>