From: Christian Marangi <ansuelsmth@gmail.com>
To: Andrew Lunn <andrew@lunn.ch>
Cc: netdev <netdev@vger.kernel.org>,
Linus Walleij <linus.walleij@linaro.org>,
Vladimir Oltean <vladimir.oltean@nxp.com>,
Florian Fainelli <f.fainelli@gmail.com>
Subject: Re: [PATCH RFC net-next 8/8] dsa: qca8k: Use DSA common code for LEDs
Date: Wed, 29 Nov 2023 03:23:40 +0100 [thread overview]
Message-ID: <6566a0ae.050a0220.c197.0f51@mx.google.com> (raw)
In-Reply-To: <53a2be7c-731c-4a27-87be-8c42b26ce9a4@lunn.ch>
On Wed, Nov 29, 2023 at 03:16:16AM +0100, Andrew Lunn wrote:
> > Hi,
> >
> > I attached a fixup patch for this to correctly work. Since we are using
> > port_num the thing needs to be decrememted by one.
>
> I thought this might happen.
>
> How about this fix instead? It fits better with the naming of
> parameters, and just does the offset once for each API function.
>
Yep also works. My idea was to act on the function that parse the
port_num and gives regs and mask to prevent problem in the future but I
don't think it will change that much.
With your proposed fix,
Reviewed-by: Christian Marangi <ansuelsmth@gmail.com>
>
> From 0789b95345bfa5086365051f95531fdb3d053e3e Mon Sep 17 00:00:00 2001
> From: Andrew Lunn <andrew@lunn.ch>
> Date: Tue, 28 Nov 2023 20:11:42 -0600
> Subject: [PATCH] dsa: qca8k: Fix off-by-one for LEDs.
>
> ---
> drivers/net/dsa/qca/qca8k-leds.c | 12 ++++++++----
> 1 file changed, 8 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/net/dsa/qca/qca8k-leds.c b/drivers/net/dsa/qca/qca8k-leds.c
> index febae23b65a9..0aa209b84251 100644
> --- a/drivers/net/dsa/qca/qca8k-leds.c
> +++ b/drivers/net/dsa/qca/qca8k-leds.c
> @@ -80,9 +80,10 @@ qca8k_parse_netdev(unsigned long rules, u32 *offload_trigger)
> }
>
> int
> -qca8k_led_brightness_set(struct dsa_switch *ds, int port_num,
> +qca8k_led_brightness_set(struct dsa_switch *ds, int port,
> u8 led_num, enum led_brightness brightness)
> {
> + int port_num = qca8k_port_to_phy(port);
> struct qca8k_led_pattern_en reg_info;
> struct qca8k_priv *priv = ds->priv;
> u32 mask, val;
> @@ -140,11 +141,12 @@ qca8k_led_brightness_set(struct dsa_switch *ds, int port_num,
> }
>
> int
> -qca8k_led_blink_set(struct dsa_switch *ds, int port_num, u8 led_num,
> +qca8k_led_blink_set(struct dsa_switch *ds, int port, u8 led_num,
> unsigned long *delay_on,
> unsigned long *delay_off)
> {
> u32 mask, val = QCA8K_LED_ALWAYS_BLINK_4HZ;
> + int port_num = qca8k_port_to_phy(port);
> struct qca8k_led_pattern_en reg_info;
> struct qca8k_priv *priv = ds->priv;
>
> @@ -231,9 +233,10 @@ qca8k_led_hw_control_is_supported(struct dsa_switch *ds,
> }
>
> int
> -qca8k_led_hw_control_set(struct dsa_switch *ds, int port_num, u8 led_num,
> +qca8k_led_hw_control_set(struct dsa_switch *ds, int port, u8 led_num,
> unsigned long rules)
> {
> + int port_num = qca8k_port_to_phy(port);
> struct qca8k_led_pattern_en reg_info;
> struct qca8k_priv *priv = ds->priv;
> u32 offload_trigger = 0;
> @@ -255,9 +258,10 @@ qca8k_led_hw_control_set(struct dsa_switch *ds, int port_num, u8 led_num,
> }
>
> int
> -qca8k_led_hw_control_get(struct dsa_switch *ds, int port_num, u8 led_num,
> +qca8k_led_hw_control_get(struct dsa_switch *ds, int port, u8 led_num,
> unsigned long *rules)
> {
> + int port_num = qca8k_port_to_phy(port);
> struct qca8k_led_pattern_en reg_info;
> struct qca8k_priv *priv = ds->priv;
> u32 val;
> --
> 2.42.0
>
--
Ansuel
next prev parent reply other threads:[~2023-11-29 2:23 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-28 23:21 [PATCH RFC net-next 0/8] DSA LED infrastructure, mv88e6xxx and QCA8K Andrew Lunn
2023-11-28 23:21 ` [PATCH RFC net-next 1/8] net: dsa: mv88e6xxx: Add helpers for 6352 LED blink and brightness Andrew Lunn
2023-11-28 23:21 ` [PATCH RFC net-next 2/8] net: dsa: mv88e6xxx: Tie the low level LED functions to device ops Andrew Lunn
2023-11-28 23:21 ` [PATCH RFC net-next 3/8] net: dsa: Plumb LED brightnes and blink into switch API Andrew Lunn
2023-11-28 23:21 ` [PATCH RFC net-next 4/8] dsa: Create port LEDs based on DT binding Andrew Lunn
2023-11-29 1:46 ` Christian Marangi
2023-11-29 19:40 ` Simon Horman
2023-11-29 20:07 ` Andrew Lunn
2023-11-28 23:21 ` [PATCH RFC net-next 5/8] dsa: Plumb in LED calls needed for hardware offload Andrew Lunn
2023-11-28 23:21 ` [PATCH RFC net-next 6/8] dsa: mv88e6xxx: Plumb in LED offload functions Andrew Lunn
2023-11-28 23:21 ` [PATCH RFC net-next 7/8] arm: boot: dts: mvebu: linksys-mamba: Add Ethernet LEDs Andrew Lunn
2023-11-28 23:21 ` [PATCH RFC net-next 8/8] dsa: qca8k: Use DSA common code for LEDs Andrew Lunn
2023-11-29 1:55 ` Christian Marangi
2023-11-29 2:16 ` Andrew Lunn
2023-11-29 2:23 ` Christian Marangi [this message]
2023-11-29 1:57 ` [PATCH RFC net-next 0/8] DSA LED infrastructure, mv88e6xxx and QCA8K Christian Marangi
2023-11-29 12:38 ` Vladimir Oltean
2023-11-29 15:13 ` Andrew Lunn
2023-11-29 15:43 ` Vladimir Oltean
2023-11-29 16:27 ` Andrew Lunn
2023-11-29 16:44 ` Vladimir Oltean
2023-11-29 21:51 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6566a0ae.050a0220.c197.0f51@mx.google.com \
--to=ansuelsmth@gmail.com \
--cc=andrew@lunn.ch \
--cc=f.fainelli@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=netdev@vger.kernel.org \
--cc=vladimir.oltean@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).